'\"
'\" Generated from file 'critcl_package\&.man' by tcllib/doctools with format 'nroff'
'\" Copyright (c) Jean-Claude Wippler
'\" Copyright (c) Steve Landers
'\" Copyright (c) 2011-2024 Andreas Kupries
'\"
.TH "critcl_package" n 3\&.3\&.1 doc "C Runtime In Tcl (CriTcl)"
.\" The -*- nroff -*- definitions below are for supplemental macros used
.\" in Tcl/Tk manual entries.
.\"
.\" .AP type name in/out ?indent?
.\"	Start paragraph describing an argument to a library procedure.
.\"	type is type of argument (int, etc.), in/out is either "in", "out",
.\"	or "in/out" to describe whether procedure reads or modifies arg,
.\"	and indent is equivalent to second arg of .IP (shouldn't ever be
.\"	needed;  use .AS below instead)
.\"
.\" .AS ?type? ?name?
.\"	Give maximum sizes of arguments for setting tab stops.  Type and
.\"	name are examples of largest possible arguments that will be passed
.\"	to .AP later.  If args are omitted, default tab stops are used.
.\"
.\" .BS
.\"	Start box enclosure.  From here until next .BE, everything will be
.\"	enclosed in one large box.
.\"
.\" .BE
.\"	End of box enclosure.
.\"
.\" .CS
.\"	Begin code excerpt.
.\"
.\" .CE
.\"	End code excerpt.
.\"
.\" .VS ?version? ?br?
.\"	Begin vertical sidebar, for use in marking newly-changed parts
.\"	of man pages.  The first argument is ignored and used for recording
.\"	the version when the .VS was added, so that the sidebars can be
.\"	found and removed when they reach a certain age.  If another argument
.\"	is present, then a line break is forced before starting the sidebar.
.\"
.\" .VE
.\"	End of vertical sidebar.
.\"
.\" .DS
.\"	Begin an indented unfilled display.
.\"
.\" .DE
.\"	End of indented unfilled display.
.\"
.\" .SO ?manpage?
.\"	Start of list of standard options for a Tk widget. The manpage
.\"	argument defines where to look up the standard options; if
.\"	omitted, defaults to "options". The options follow on successive
.\"	lines, in three columns separated by tabs.
.\"
.\" .SE
.\"	End of list of standard options for a Tk widget.
.\"
.\" .OP cmdName dbName dbClass
.\"	Start of description of a specific option.  cmdName gives the
.\"	option's name as specified in the class command, dbName gives
.\"	the option's name in the option database, and dbClass gives
.\"	the option's class in the option database.
.\"
.\" .UL arg1 arg2
.\"	Print arg1 underlined, then print arg2 normally.
.\"
.\" .QW arg1 ?arg2?
.\"	Print arg1 in quotes, then arg2 normally (for trailing punctuation).
.\"
.\" .PQ arg1 ?arg2?
.\"	Print an open parenthesis, arg1 in quotes, then arg2 normally
.\"	(for trailing punctuation) and then a closing parenthesis.
.\"
.\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
.if t .wh -1.3i ^B
.nr ^l \n(.l
.ad b
.\"	# Start an argument description
.de AP
.ie !"\\$4"" .TP \\$4
.el \{\
.   ie !"\\$2"" .TP \\n()Cu
.   el          .TP 15
.\}
.ta \\n()Au \\n()Bu
.ie !"\\$3"" \{\
\&\\$1 \\fI\\$2\\fP (\\$3)
.\".b
.\}
.el \{\
.br
.ie !"\\$2"" \{\
\&\\$1	\\fI\\$2\\fP
.\}
.el \{\
\&\\fI\\$1\\fP
.\}
.\}
..
.\"	# define tabbing values for .AP
.de AS
.nr )A 10n
.if !"\\$1"" .nr )A \\w'\\$1'u+3n
.nr )B \\n()Au+15n
.\"
.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
.nr )C \\n()Bu+\\w'(in/out)'u+2n
..
.AS Tcl_Interp Tcl_CreateInterp in/out
.\"	# BS - start boxed text
.\"	# ^y = starting y location
.\"	# ^b = 1
.de BS
.br
.mk ^y
.nr ^b 1u
.if n .nf
.if n .ti 0
.if n \l'\\n(.lu\(ul'
.if n .fi
..
.\"	# BE - end boxed text (draw box now)
.de BE
.nf
.ti 0
.mk ^t
.ie n \l'\\n(^lu\(ul'
.el \{\
.\"	Draw four-sided box normally, but don't draw top of
.\"	box if the box started on an earlier page.
.ie !\\n(^b-1 \{\
\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.el \}\
\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.\}
.fi
.br
.nr ^b 0
..
.\"	# VS - start vertical sidebar
.\"	# ^Y = starting y location
.\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
.de VS
.if !"\\$2"" .br
.mk ^Y
.ie n 'mc \s12\(br\s0
.el .nr ^v 1u
..
.\"	# VE - end of vertical sidebar
.de VE
.ie n 'mc
.el \{\
.ev 2
.nf
.ti 0
.mk ^t
\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
.sp -1
.fi
.ev
.\}
.nr ^v 0
..
.\"	# Special macro to handle page bottom:  finish off current
.\"	# box/sidebar if in box/sidebar mode, then invoked standard
.\"	# page bottom macro.
.de ^B
.ev 2
'ti 0
'nf
.mk ^t
.if \\n(^b \{\
.\"	Draw three-sided box if this is the box's first page,
.\"	draw two sides but no top otherwise.
.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.\}
.if \\n(^v \{\
.nr ^x \\n(^tu+1v-\\n(^Yu
\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
.\}
.bp
'fi
.ev
.if \\n(^b \{\
.mk ^y
.nr ^b 2
.\}
.if \\n(^v \{\
.mk ^Y
.\}
..
.\"	# DS - begin display
.de DS
.RS
.nf
.sp
..
.\"	# DE - end display
.de DE
.fi
.RE
.sp
..
.\"	# SO - start of list of standard options
.de SO
'ie '\\$1'' .ds So \\fBoptions\\fR
'el .ds So \\fB\\$1\\fR
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 5.5c 11c
.ft B
..
.\"	# SE - end of list of standard options
.de SE
.fi
.ft R
.LP
See the \\*(So manual entry for details on the standard options.
..
.\"	# OP - start of full description for a single option
.de OP
.LP
.nf
.ta 4c
Command-Line Name:	\\fB\\$1\\fR
Database Name:	\\fB\\$2\\fR
Database Class:	\\fB\\$3\\fR
.fi
.IP
..
.\"	# CS - begin code excerpt
.de CS
.RS
.nf
.ta .25i .5i .75i 1i
..
.\"	# CE - end code excerpt
.de CE
.fi
.RE
..
.\"	# UL - underline word
.de UL
\\$1\l'|0\(ul'\\$2
..
.\"	# QW - apply quotation marks to word
.de QW
.ie '\\*(lq'"' ``\\$1''\\$2
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\$2
..
.\"	# PQ - apply parens and quotation marks to word
.de PQ
.ie '\\*(lq'"' (``\\$1''\\$2)\\$3
.\"" fix emacs highlighting
.el (\\*(lq\\$1\\*(rq\\$2)\\$3
..
.\"	# QR - quoted range
.de QR
.ie '\\*(lq'"' ``\\$1''\\-``\\$2''\\$3
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\-\\*(lq\\$2\\*(rq\\$3
..
.\"	# MT - "empty" string
.de MT
.QW ""
..
.BS
.SH NAME
critcl_package \- CriTcl Package Reference
.SH SYNOPSIS
package require \fBTcl 8\&.6\fR
.sp
package require \fBcritcl ?3\&.3\&.1?\fR
.sp
package require \fBplatform ?1\&.0\&.2?\fR
.sp
package require \fBmd5 ?2?\fR
.sp
\fB::critcl::ccode\fR \fIfragment\fR
.sp
\fB::critcl::ccommand\fR \fItclname\fR \fIcname\fR
.sp
\fB::critcl::ccommand\fR \fItclname\fR \fIarguments\fR \fIbody\fR ?\fIoption\fR \fIvalue\fR\&.\&.\&.?
.sp
\fB::critcl::cdata\fR \fItclname\fR \fIdata\fR
.sp
\fB::critcl::cconst\fR \fItclname\fR \fIresulttype\fR \fIvalue\fR
.sp
\fB::critcl::cdefines\fR \fIlist of glob patterns\fR ?\fInamespace\fR?
.sp
\fB::critcl::cproc\fR \fIname\fR \fIarguments\fR \fIresulttype\fR \fIbody\fR ?\fIoption\fR \fIvalue\fR\&.\&.\&.?
.sp
\fB::critcl::cproc\fR \fIname\fR \fIarguments\fR \fIresulttype\fR
.sp
\fB::critcl::cinit\fR \fItext\fR \fIexternals\fR
.sp
\fB::critcl::include\fR \fIpath\fR
.sp
\fB::critcl::api\fR \fBimport\fR \fIname\fR \fIversion\fR
.sp
\fB::critcl::api\fR \fBfunction\fR \fIresulttype\fR \fIname\fR \fIarguments\fR
.sp
\fB::critcl::api\fR \fBheader\fR ?\fIglob pattern\fR\&.\&.\&.?
.sp
\fB::critcl::api\fR \fBextheader\fR ?\fIfile\fR\&.\&.\&.?
.sp
\fB::critcl::license\fR \fIauthor\fR ?\fItext\fR\&.\&.\&.?
.sp
\fB::critcl::summary\fR \fItext\fR
.sp
\fB::critcl::description\fR \fItext\fR
.sp
\fB::critcl::subject\fR ?\fIkey\fR\&.\&.\&.?
.sp
\fB::critcl::meta\fR \fIkey\fR ?\fIword\fR\&.\&.\&.?
.sp
\fB::critcl::meta?\fR \fIkey\fR
.sp
\fB::critcl::buildrequirement\fR \fIscript\fR
.sp
\fB::critcl::cheaders\fR ?\fIarg\fR\&.\&.\&.?
.sp
\fB::critcl::csources\fR ?\fIglob pattern\fR\&.\&.\&.?
.sp
\fB::critcl::clibraries\fR ?\fIglob pattern\fR\&.\&.\&.?
.sp
\fB::critcl::source\fR \fIglob pattern\fR
.sp
\fB::critcl::tsources\fR \fIglob pattern\fR\&.\&.\&.
.sp
\fB::critcl::owns\fR \fIglob pattern\fR\&.\&.\&.
.sp
\fB::critcl::cflags\fR ?\fIarg\fR\&.\&.\&.?
.sp
\fB::critcl::ldflags\fR ?\fIarg\fR\&.\&.\&.?
.sp
\fB::critcl::framework\fR ?\fIarg\fR\&.\&.\&.?
.sp
\fB::critcl::tcl\fR \fIversion\fR
.sp
\fB::critcl::tk\fR
.sp
\fB::critcl::preload\fR \fIlib\fR\&.\&.\&.
.sp
\fB::critcl::debug\fR \fIarea\fR\&.\&.\&.
.sp
\fB::critcl::check\fR ?\fIlabel\fR? \fItext\fR
.sp
\fB::critcl::checklink\fR ?\fIlabel\fR? \fItext\fR
.sp
\fB::critcl::msg\fR ?\fB-nonewline\fR? \fImsg\fR
.sp
\fB::critcl::print\fR ?\fB-nonewline\fR? ?\fIchan\fR? \fImsg\fR
.sp
\fB::critcl::compiled\fR
.sp
\fB::critcl::compiling\fR
.sp
\fB::critcl::done\fR
.sp
\fB::critcl::failed\fR
.sp
\fB::critcl::load\fR
.sp
\fB::critcl::config\fR \fIoption\fR ?\fIval\fR?
.sp
\fB::critcl::cache\fR ?path?
.sp
\fB::critcl::clean_cache\fR ?\fIpattern\fR\&.\&.\&.?
.sp
\fB::critcl::readconfig\fR \fIpath\fR
.sp
\fB::critcl::showconfig\fR ?\fIchan\fR?
.sp
\fB::critcl::showallconfig\fR ?\fIchan\fR?
.sp
\fB::critcl::chooseconfig\fR \fItarget\fR ?\fInomatcherr\fR?
.sp
\fB::critcl::setconfig\fR \fItarget\fR
.sp
\fB::critcl::actualtarget\fR
.sp
\fB::critcl::buildforpackage\fR ?\fIflag\fR?
.sp
\fB::critcl::cnothingtodo\fR \fIfile\fR
.sp
\fB::critcl::cresults\fR ?\fIfile\fR?
.sp
\fB::critcl::crosscheck\fR
.sp
\fB::critcl::error\fR \fImsg\fR
.sp
\fB::critcl::knowntargets\fR
.sp
\fB::critcl::sharedlibext\fR
.sp
\fB::critcl::targetconfig\fR
.sp
\fB::critcl::buildplatform\fR
.sp
\fB::critcl::targetplatform\fR
.sp
\fB::critcl::cobjects\fR ?\fIglob pattern\fR\&.\&.\&.?
.sp
\fB::critcl::scan\fR \fIpath\fR
.sp
\fB::critcl::name2c\fR \fIname\fR
.sp
\fB::critcl::argnames\fR \fIarguments\fR
.sp
\fB::critcl::argcnames\fR \fIarguments\fR
.sp
\fB::critcl::argcsignature\fR \fIarguments\fR
.sp
\fB::critcl::argvardecls\fR \fIarguments\fR
.sp
\fB::critcl::argconversion\fR \fIarguments\fR ?\fIn\fR?
.sp
\fB::critcl::argoptional\fR \fIarguments\fR
.sp
\fB::critcl::argdefaults\fR \fIarguments\fR
.sp
\fB::critcl::argsupport\fR \fIarguments\fR
.sp
\fB::critcl::userconfig\fR \fBdefine\fR \fIname\fR \fIdescription\fR \fItype\fR ?\fIdefault\fR?
.sp
\fB::critcl::userconfig\fR \fBquery\fR \fIname\fR
.sp
\fB::critcl::userconfig\fR \fBset\fR \fIname\fR \fIvalue\fR
.sp
\fB::critcl::at::caller\fR
.sp
\fB::critcl::at::caller\fR \fIoffset\fR
.sp
\fB::critcl::at::caller\fR \fIoffset\fR \fIlevel\fR
.sp
\fB::critcl::at::here\fR
.sp
\fB::critcl::at::get*\fR
.sp
\fB::critcl::at::get\fR
.sp
\fB::critcl::at::=\fR \fIfile\fR \fIline\fR
.sp
\fB::critcl::at::incr\fR \fIn\fR\&.\&.\&.
.sp
\fB::critcl::at::incrt\fR \fIstr\fR\&.\&.\&.
.sp
\fB::critcl::at::caller!\fR
.sp
\fB::critcl::at::caller!\fR \fIoffset\fR
.sp
\fB::critcl::at::caller!\fR \fIoffset\fR \fIlevel\fR
.sp
\fB::critcl::at::here!\fR
.sp
\fB::critcl::collect_begin\fR
.sp
\fB::critcl::collect_end\fR
.sp
\fB::critcl::collect\fR \fIscript\fR
.sp
\fB::critcl::make\fR \fIpath\fR \fIcontents\fR
.sp
\fB::preload\fR \fIlibrary\fR
.sp
.BE
.SH DESCRIPTION
.PP
Be welcome to the \fIC Runtime In Tcl\fR (short: \fICriTcl\fR), a system for embedding and using C
code from within \fITcl\fR [http://core\&.tcl-lang\&.org/tcl] scripts\&.
.PP
The \fBcritcl\fR package is the core of the system\&.  For an overview of the
complete system, see \fIIntroduction To CriTcl\fR\&.  For the usage of the
standalone \fBcritcl\fR program, see \fICriTcl Application\fR\&.
This core package maybe be used to embed C code into Tcl scripts\&.  It also
provides access to the internals that other parts of the core use and which
are of interest to those wishing to understand the internal workings of the
core and of the API it provides to the \fICriTcl Application\fR\&.  These
advanced sections are marked as such so that those simply wishing to use the
package can skip them\&.
.PP
This package resides in the Core Package Layer of CriTcl\&.
.PP
.PS
.nf
+----------------+
|Applications    |
| critcl         |
| critcl::app    |
+----------------+

*================*
|Core Packages   |
| critcl         |
| critcl::util   |
*================*

+----------------+
|Support Packages|
| stubs::*       |
| md5, platform  |
|  \&.\&.\&.           |
+----------------+

.fi
.PE
.PP
.SH API
A short note ahead of the documentation: Instead of repeatedly talking
about
"a Tcl script with embbedded C code", or
"a Tcl script containing CriTcl commands",
we call such a script a \fICriTcl script\fR\&.  A file containing a
\fICriTcl script\fR usually has the extension \fB\&.tcl\fR or \fB\&.critcl\fR\&.
.SS "EMBEDDED C CODE"
The following commands append C code fragments to the current module\&.  Fragments
appear in the module in the order they are appended, so the earlier fragments
(variables, functions, macros, etc\&.) are visible to later fragments\&.
.TP
\fB::critcl::ccode\fR \fIfragment\fR
Appends the C code in \fIfragment\fR to the current module and returns the
empty string\&.
See \fBRuntime Behaviour\fR\&.
.TP
\fB::critcl::ccommand\fR \fItclname\fR \fIcname\fR
As documented below, except that \fIcname\fR is the name of a C function
that already exists\&.
.TP
\fB::critcl::ccommand\fR \fItclname\fR \fIarguments\fR \fIbody\fR ?\fIoption\fR \fIvalue\fR\&.\&.\&.?
Appends the code to create a Tcl command named \fItclname\fR and a
corresponding C function whose body is \fIbody\fR and which behaves as
documented for Tcl's own
\fITcl_CreateObjCommand\fR [https://www\&.tcl-lang\&.org/man/tcl/TclLib/CrtObjCmd\&.htm]\&.
.sp
\fIaguments\fR is a list of zero to four names for the standard arguments
\fBclientdata\fR, \fBinterp\fR, \fBobjc\fR, and \fBobjv\fR\&.  The
standard default names are used in place of any missing names\&.
This is a more low-level way than \fBcritcl::cproc\fR to define a command, as
processing of the items in \fBobjv\fR is left to the author, affording
complete control over the handling of the arguments to the command\&.
See section \fBRuntime Behaviour\fR\&.
.sp
Returns the empty string\&.
.sp
Each \fIoption\fR may be one of:
.RS
.TP
\fB-clientdata\fR \fIc-expression\fR
Provides the client data for the new command\&.  \fBNULL\fR by default\&.
.TP
\fB-delproc\fR \fIc-expression\fR
Provides a function pointer of type \fITcl_CmdDeleteProc\fR [https://www\&.tcl-lang\&.org/man/tcl/TclLib/CrtObjCmd\&.htm] as the deletion function for the new command\&.  \fBNULL\fR by default\&.
.TP
\fB-cname\fR \fIboolean\fR
If \fBfalse\fR (the default), a name for the corresponding C function is
automatically derived from the fully-qualified \fItclname\fR\&.  Otherwise, name
of the C function is the last component of \fItclname\fR\&.
.RE
.TP
\fB::critcl::cdata\fR \fItclname\fR \fIdata\fR
Appends the code to create a new Tcl command named \fItclname\fR which returns
\fIdata\fR as a \fBByteArray\fR result\&.
.sp
Returns the empty string\&.
.TP
\fB::critcl::cconst\fR \fItclname\fR \fIresulttype\fR \fIvalue\fR
Appends the code to create a new Tcl command named \fItclname\fR which returns
the constant \fIvalue\fR having the Tcl type \fIresulttype\fR\&.  \fIvalue\fR can
be a C macro or a function \fIcall\fR (including the parentheses) to any
visible C function that does not take arguments\&.
Unlike \fBcritcl::cdata\fR, \fIresulttype\fR can be any type known to
\fBcritcl::cproc\fR\&.
Its semantics are equivalent to:
.CS


    cproc $tclname {} $resulttype "return $value ;"

.CE
.sp
This is more efficient than \fBcritcl::cproc\fR since there is no
C function generated\&.
.sp
Returns the empty string\&.
.TP
\fB::critcl::cdefines\fR \fIlist of glob patterns\fR ?\fInamespace\fR?
Arranges for \fIC enum\fR and \fI#define\fR values that match one of the
patterns in \fIglob patterns\fR to be created in the namespace
\fInamespace\fR, each variable having the same as the corresponding C item\&.
The default namespace is the global namespace\&.  A pattern that matches nothing
is ignored\&.
.sp
The Tcl variables are created when the module is compiled, using the
preprocessor in order to properly find all matching C definitions\&.
.sp
Produces no C code\&.  The desired C definitions must already exist\&.
.TP
\fB::critcl::cproc\fR \fIname\fR \fIarguments\fR \fIresulttype\fR \fIbody\fR ?\fIoption\fR \fIvalue\fR\&.\&.\&.?
Appends a function having \fIbody\fR as its body, another shim function to
perform the needed conversions, and the code to create a corresponding Tcl
command named \fItclname\fR\&.  Unlike \fBcritcl::ccommand\fR the arguments and
result are typed, and CriTcl generates the code to convert between Tcl_Obj
values and C data types\&.
See also \fBRuntime Behaviour\fR\&.
.sp
Returns the empty string\&.
.sp
.RS
.TP
string \fIoption\fR
Each may be one of:
.RS
.TP
\fB-cname\fR \fIboolean\fR
If \fBfalse\fR (the default), a name for the corresponding C function is
automatically derived from the fully-qualified \fItclname\fR\&.  Otherwise, name
of the C function is the last component of \fItclname\fR\&.
.TP
\fB-pass-cdata\fR \fIboolean\fR
If \fBfalse\fR (the default), the shim function performing the conversion to
and from Tcl level does not pass the ClientData as the first argument to
the function\&.
.TP
\fB-arg-offset\fR \fIint\fR
A non-negative integer, \fB0\fR by default, indicating the number of hidden
arguments preceding the actual procedure arguments\&.  Used by higher-order code
generators where there are prefix arguments which are not directly seen by the
function but which influence argument counting and extraction\&.
.RE
.TP
string \fIresulttype\fR
May be a predefined or a custom type\&.
See \fICriTcl cproc Type Reference\fR for the full list of predefined types and how to
extend them\&.
Unless otherwise noted, the Tcl return code is always \fBTCL_OK\fR\&.
.TP
list \fIarguments\fR
Is a multi-dictionary where each key is an
argument type and its value is the argument name\&.
For example:
.CS

 int x int y
.CE
.sp
Each argument name must be a valid C identifier\&.
.sp
If the name is a list containing two items, the first item is the name
and the second item is the default value\&.  A limited form of variadic arguments
can be accomplished using such default values\&.
For example:
.CS

 int {x 1}
.CE
.IP
Here \fIx\fR is an optional argument of type \fBint\fR with a default
value of \fB1\fR\&.
.sp
Argument conversion is completely bypassed when the argument is not
provided, so a custom converter doing validation does not get the chance to
validate the default value\&.  In this case, the value should be checked in the
body of the function\&.
.sp
Each argument type may be a predefined or custom type\&.
See \fICriTcl cproc Type Reference\fR for the full list of predefined types and how to
extend them\&.
.RE
.TP
\fB::critcl::cproc\fR \fIname\fR \fIarguments\fR \fIresulttype\fR
As documented below, but used when the C function named \fIname\fR already
exists\&.
.TP
\fB::critcl::cinit\fR \fItext\fR \fIexternals\fR
Appends the C code in \fItext\fR and \fIexternals\fR, but only after all the
other fragments appended by the previously-listed commands regardless of their
placement in the \fICriTcl script\fR relative to this command\&.  Thus, all
their content is visible\&.  See also \fBRuntime Behaviour\fR\&.
.sp
The C code in \fItext\fR is placed into the body of the initialization
function of the shared library backing the \fICriTcl script\fR, and is
executed when this library is loaded into the interpreter\&.  It has access to
the variable \fBTcl_Interp* interp\fR referencing the Tcl interpreter currently
being initialized\&.
.sp
\fIexternals\fR is placed outside and just before the initialization
function, making it a good place for any external symbols required by
initialization function, but which should not be accessible by any other parts
of the C code\&.
.sp
Calls to this command are cumulative\&.
.sp
Returns the empty string\&.
.TP
\fB::critcl::include\fR \fIpath\fR
This command is a convenient shorthand for
.CS


critcl::code {
  #include <${path}>
}

.CE
.PP
.SS "STUBS TABLE MANAGEMENT"
CriTcl versions 3 and later provide \fBcritcl::api\fR to create and manipulate
stubs tables, Tcl's dynamic linking mechanism handling the resolution of
symbols between C extensions\&.
See \fIhttp://wiki\&.tcl-lang\&.org/285\fR
for an introduction, and section \fBStubs Tables\fR
for the details of CriTcl's particular variant\&.
.PP
Importing stubs tables, i\&.e\&. APIs, from another extension:
.TP
\fB::critcl::api\fR \fBimport\fR \fIname\fR \fIversion\fR
Adds the following include directives into the \fICriTcl script\fR
\fIand\fR each of its companion "\fI\&.c\fR" files:
.RS
.IP [1]
#include <\fBname\fR/\fBname\fRDecls\&.h>
.IP [2]
#include <\fBname\fR/\fBname\fRStubLib\&.h>
.RE
.IP
Returns an error if "\fI\fBname\fR\fR" isn't in the search path for the
compiler\&.  See \fBcritcl::cheaders\fR and the critcl application's \fB-I\fR
and \fB-includedir\fR options\&.
.sp
\fIImportant:\fR If \fBname\fR is a fully-qualified name in a
non-global namespace, e\&.g\&.
"c::stack", the namespace separators "::" are converted into underscores
("_") in path names, C code, etc\&.
.sp
\fBname\fR/\fBname\fRDecls\&.h contains the stubs table type declarations,
mapping macros, etc\&., and may include package-specific headers\&.  See
\fBcritcl::api header\fR, below\&.  An \fI#include\fR directive is added at
the beginning of the generated code for \fICriTcl script\fR and at the
beginning of each of its companion "\fI\&.c\fR" files\&.
.sp
\fBname\fR/\fBname\fRStubLib\&.h contains the stubs table variable
definition and the function to initialize it\&.  An \fI#include\fR directive
for it is added to the initialization code for the \fICriTcl script\fR ,
along with a call to the initializer function\&.
.sp
If "\fI\fBname\fR/\fBname\fR\&.decls\fR" accompanies
\fBname\fR/\fBname\fRDecls\&.h, it should contain the external representation of
the stubs table used to generate the headers\&. The file is read and the internal
representation of the stubs table returned for use by the importing package\&.
Otherwise, the empy string is returned\&.
.sp
One possible use would be the automatic generation of C code
calling on the functions listed in the imported API\&.
.sp
When generating a TEA package the names of the imported APIs
are used to declare \fBconfigure\fR options with which the user can
declare a non-standard directory for the headers of the API\&. Any API
\fBname\fR is translated into a single configure option
\fB--with-\fBname\fR-include\fR\&.
.PP
.PP
Declaration and export of a stubs table, i\&.e\&. API, for
the \fICriTcl script\fR:
.TP
\fB::critcl::api\fR \fBfunction\fR \fIresulttype\fR \fIname\fR \fIarguments\fR
Adds to the public API of the \fICriTcl script\fR the signature
for the function named \fIname\fR and having the signature specified by
\fIarguments\fR and \fIresulttype\fR\&.  Code is generated for a "\fI\&.decls\fR"
file, the corresponding public headers, and a stubs table usable by
\fBcritcl::api import\fR\&.
.sp
\fIarguments\fR is a multidict where each key is an argument type and its
value is the argument name, and \fIresulttype\fR is a C type\&.
.TP
\fB::critcl::api\fR \fBheader\fR ?\fIglob pattern\fR\&.\&.\&.?
Each file matching a \fIglob pattern\fR is copied into the directory
containing the generated headers, and an \fI#include\fR directive for it is
added to "\fIDecls\&.h\fR" for the \fICriTcl script\fR\&.
Returns an error if a \fIglob pattern\fR matches nothing\&.
.sp
A pattern for a relative path is resolved relative to the directory
containing the \fICriTcl script\fR\&.
.TP
\fB::critcl::api\fR \fBextheader\fR ?\fIfile\fR\&.\&.\&.?
Like \fB::critcl::api header\fR, but each \fIfile\fR should exist in the
external development environment\&.  An \fI#include\fR directive is added to
"\fI\fBfoo\fRDecls\&.h\fR", but \fIfile\fR is not copied to the package header
directory\&. \fIfile\fR is not a glob pattern as CriTcl has no context,
i\&.e directory, in which to expand such patterns\&.
.PP
As with the headers for an imported API, an \fI#include\fR directive is
added to the generated code for the \fICriTcl script\fR and to
each companion "\fI\&.c\fR" file\&.
.PP
In "compile & run" mode the generated header files and any companion
headers are placed in the \fBResult Cache\fR subdirectory for the
\fICriTcl script\fR\&. This directory is added to the include search path of
any other package importing this API and and building in mode "compile & run"\&.
.PP
In "generate package" mode \fB-includedir\fR specifies the
subdirectory in the package to place the generated headers in\&. This
directory is added to the search paths for header files, ensuring that a
package importing an API finds it if the package exporting that API used the
same setting for \fB-includedir\fR\&.
.PP
In "generate TEA" mode the static scanner recognizes
\fBcritcl::api header\fR as a source of companion files\&.
It also uses data from calls to \fBcritcl::api import\fR to
add support for \fB--with-\fBfoo\fR-include\fR options into the
generated "\fIconfigure(\&.in)\fR" so that a user may specify custom
locations for the headers of any imported API\&.
.SS "PACKAGE META DATA"
CriTcl versions 3 and later can create TEApot meta-data to be placed into
"\fIteapot\&.txt\fR" in a format suitable for use by the
\fITEApot tools\fR [http://docs\&.activestate\&.com/activetcl/8\&.5/tpm/toc\&.html]\&.
.PP
In version 2, some meta data support was already present through
\fB::critcl::license\fR, but this was only used to generate "\fIlicense\&.txt\fR"\&.
.TP
\fB::critcl::license\fR \fIauthor\fR ?\fItext\fR\&.\&.\&.?
Ignored in "compile & run" mode\&.
.sp
In "generate package" mode provides information about the author of the
package and the license for the package\&.
.sp
\fItext\fR arguments are concatenated to form the text of the license, which is
written to "\fIlicense\&.terms\fR" in the same directory as "\fIpkgIndex\&.tcl\fR"\&.
If no \fItext\fR is provided the license is read from "\fIlicense\&.terms\fR"
in the same directory as the \fICriTcl script\fR\&.
.sp
This information takes precedence over any information specified through
the generic API \fB::critcl::meta\fR\&.  It is additionally placed
into the meta data file "\fIteapot\&.txt\fR" under the keys \fIas::author\fR and
\fIlicense\fR\&.
.TP
\fB::critcl::summary\fR \fItext\fR
Ignored in "compile & run" mode\&.
.sp
In "generate package" mode places a short, preferably one-line description of
the package into the meta data file "\fIteapot\&.txt\fR" under the key
\fIsummary\fR\&.  This information takes precedence over information specified
through the generic API \fB::critcl::meta\fR\&.
.TP
\fB::critcl::description\fR \fItext\fR
Ignored in "compile & run" mode\&.
.sp
In "generate package" mode places a longer description of the package into the
meta data file "\fIteapot\&.txt\fR", under the key \fIdescription\fR\&.  The data
specified by this command takes precedence over any information specified
through the generic API \fB::critcl::meta\fR\&.
.TP
\fB::critcl::subject\fR ?\fIkey\fR\&.\&.\&.?
Ignored in "compile & run" mode\&.
.sp
In "generate package" mode places each \fIkey\fR into the meta data file
"\fIteapot\&.txt\fR", under the key \fIsubject\fR\&.  This information takes
precedence over any information specified through the generic API
\fB::critcl::meta\fR\&.
.sp
Calls to this command are cumulative\&.
.TP
\fB::critcl::meta\fR \fIkey\fR ?\fIword\fR\&.\&.\&.?
Provides arbitrary meta data outside of the following reserved keys:
\fIas::author\fR,
\fIas::build::date\fR,
\fIdescription\fR,
\fIlicense\fR,
\fIname\fR,
\fIplatform\fR,
\fIrequire\fR
\fIsubject\fR,
\fIsummary\fR, and
\fIversion\fR,
Its behaviour is like \fB::critcl::subject\fR in that it treats all
keys as list of words, with each call providing one or more words for
the key, and multiple calls extending the data for an existing key, if
not reserved\&.
.sp
While it is possible to declare information for one of the
reserved keys with this command such data is ignored when the final
meta data is assembled and written\&.
.sp
Use the commands
\fB::critcl::license\fR,
\fB::critcl::summary\fR,
\fB::critcl::description\fR
\fB::critcl::subject\fR,
\fBpackage require\fR, and
\fBpackage provide\fR
to declare data for the reserved keys\&.
.sp
The information for the reserved keys
\fIas::build::date\fR and
\fIplatform\fR
is automatically generated by \fBcritcl\fR itself\&.
.TP
\fB::critcl::meta?\fR \fIkey\fR
Returns the value in the metadata associated with \fIkey\fR\&.
.sp
Used primarily to retrieve the name of the package
from within utility packages having to adapt C code templates to their
environment\&. For example, \fBcritcl::class\fR uses does this\&.
.TP
\fB::critcl::buildrequirement\fR \fIscript\fR
Provides control over the capturing of dependencies declared via
\fBpackage require\fR\&. \fIscript\fR is evaluated and any dependencies
declared within are ignored, i\&.e\&. not recorded in the meta data\&.
.PP
.SS "CONTROL & INTERFACE"
These commands control the details of compilation and linking a
\fICriTcl script\fR\&.  The information is used only to compile/link the
object for the \fICriTcl script\fR\&.  For example, information for
"\fIFOO\&.tcl\fR" is kept separate from information for "\fIBAR\&.tcl\fR"\&.
.TP
\fB::critcl::cheaders\fR ?\fIarg\fR\&.\&.\&.?
Provides additional header locations\&.
.sp
Each argument is a glob pattern\&.  If an argument begins with \fB-\fR
it is an argument to the compiler\&.  Otherwise the parent directory of each
matching path is a directory to be searched for header files\&.  Returns an
error if a pattern matches no files\&.
A pattern for a relative path is resolved relative to the directory
containing the \fICriTcl script\fR\&.
.sp
\fB#include\fR lines are not automatically generated for matching
header files\&.  Use \fBcritcl::include\fR or \fBcritcl::ccode\fR as necessary to
add them\&.
.sp
Calls to this command are cumulative\&.
.TP
\fB::critcl::csources\fR ?\fIglob pattern\fR\&.\&.\&.?
Matching paths become inputs to the compilation of the current object
along with the sources for the current \fICriTcl script\fR\&.  Returns an
error if no paths match a pattern\&.
A pattern for a relative path is resolved relative to the directory
containing the \fICriTcl script\fR\&.
.sp
Calls to this command are cumulative\&.
.TP
\fB::critcl::clibraries\fR ?\fIglob pattern\fR\&.\&.\&.?
provides the link step with additional libraries and library locations\&.
A \fIglob pattern\fR that begins with \fB-\fR is added as an argument to
the linker\&.  Otherwise matching files are linked into the shared library\&.
Returns an error if no paths match a pattern\&.
A pattern for a relative path is resolved relative to the directory
containing the \fICriTcl script\fR\&.
.sp
Calls to this command are cumulative\&.
.TP
\fB::critcl::source\fR \fIglob pattern\fR
Evaluates as scripts the files matching each \fIglob pattern\fR\&.  Returns an
error if there are no matching files\&.
A pattern for a relative path is resolved relative to the directory
containing the \fICriTcl script\fR\&.
.TP
\fB::critcl::tsources\fR \fIglob pattern\fR\&.\&.\&.
Provides the information about additional Tcl script files to source when the
shared library is loaded\&.
.sp
Matching paths are made available to the generated shared library when
it is loaded for the current \fICriTcl script\fR\&.  Returns an error if a
pattern matches no files\&.
A pattern for a relative path is resolved relative to the directory
containing the \fICriTcl script\fR\&.
.sp
Calls to this command are cumulative\&.
.sp
After the shared library has been loaded, the declared files are sourced
in the same order that they were provided as arguments\&.
.TP
\fB::critcl::owns\fR \fIglob pattern\fR\&.\&.\&.
Ignored in "compile and run" and "generate package" modes\&.
In "generate TEA" mode each file matching a \fIglob pattern\fR is a file to
be included in the TEA extension but that could not be ascertained as such from
previous commands like \fBcritcl::csources\fR and \fBcritcl::tsources\fR,
either because of they were specified dynamically or because they were directly
sourced\&.
.TP
\fB::critcl::cflags\fR ?\fIarg\fR\&.\&.\&.?
.sp
Each \fIarg\fR is an argument to the compiler\&.
.sp
Calls to this command are cumulative\&.
.TP
\fB::critcl::ldflags\fR ?\fIarg\fR\&.\&.\&.?
.sp
Each \fIarg\fR is an argument to the linker\&.
.sp
Calls to this command are cumulative\&.
.TP
\fB::critcl::framework\fR ?\fIarg\fR\&.\&.\&.?
Each \fIarg\fR is the name of a framework to link on MacOS X\&.  This command is
ignored if OS X is not the target so that frameworks can be specified
unconditionally\&.
.sp
Calls to this command are cumulative\&.
.TP
\fB::critcl::tcl\fR \fIversion\fR
Specifies the minimum version of the Tcl runtime
to compile and link the package for\&.  The default is \fB8\&.4\fR\&.
.TP
\fB::critcl::tk\fR
Arranges to include the Tk headers and link to the Tk stubs\&.
.TP
\fB::critcl::preload\fR \fIlib\fR\&.\&.\&.
Arranges for the external shared library \fIlib\fR to be loaded
before the shared library for the \fICriTcl script\fR is loaded\&.
.sp
Calls to this command are cumulative\&.
.sp
Each library \fIFOO\fR is searched for in the directories listed below, in the order
listed\&.  The search stops at the first existing path\&.
Additional notes:
.RS
.IP \(bu
\fBplatform\fR is the placeholder for the target platform of the package\&.
.IP \(bu
The extension "\fI\&.so\fR" is the placeholder for whatever actual extension is used by the target platform for its shared libraries\&.
.IP \(bu
The search is relative to the current working directory\&.
.RE
.IP
And now the paths, depending on the exact form of the library name:
.RS
.TP
FOO
.RS
.IP [1]
FOO\&.so
.IP [2]
FOO/FOO\&.so
.IP [3]
FOO/\fBplatform\fR/FOO\&.so
.RE
.TP
PATH/FOO
The exact set searched depends on the existence of
directory "\fIPATH/FOO\fR"\&. If it exists, critcl searches
.RS
.IP [1]
FOO\&.so
.IP [2]
PATH/FOO/FOO\&.so
.IP [3]
PATH/FOO/\fBplatform\fR/FOO\&.so
.RE
.IP
Otherwise it searches
.RS
.IP [1]
FOO\&.so
.IP [2]
PATH/FOO\&.so
.IP [3]
PATH/\fBplatform\fR/FOO\&.so
.RE
.IP
instead\&.
.TP
/PATH/FOO
Even when specifying FOO with an absolute path the first path searched
is relative to the current working directory\&.
.RS
.IP [1]
FOO\&.so
.IP [2]
/PATH/FOO\&.so
.IP [3]
/PATH/\fBplatform\fR/FOO\&.so
.RE
.RE
.IP
For developers who want to understand or modify the internals of the
\fBcritcl\fR package, \fBPreloading functionality\fR explains how
preloading is implemented\&.
.TP
\fB::critcl::debug\fR \fIarea\fR\&.\&.\&.
Specifies what debugging features to activate\&. Internally each area is translated into
area-specific flags for the compiler which are then handed over to
\fBcritcl::cflags\fR\&.
.RS
.TP
\fBmemory\fR
Specifies Tcl memory debugging\&.
.TP
\fBsymbols\fR
Specifies compilation and linking with debugging symbols for use by a debugger
or other tool\&.
.TP
\fBall\fR
Specifies all available debugging\&.
.RE
.PP
.SS INTROSPECTION
The following commands control compilation and linking\&.
.TP
\fB::critcl::check\fR ?\fIlabel\fR? \fItext\fR
Returns a \fBtrue\fR if the C code in \fItext\fR compiles sucessfully, and
\fBfalse\fR otherwise\&.  Used to check for availability of features in the
build environment\&.
If provided, \fIlabel\fR is used to uniquely mark the results in the generated
log\&.
.TP
\fB::critcl::checklink\fR ?\fIlabel\fR? \fItext\fR
Like \fBcritcl::check\fR but also links the compiled objects, returning
\fBtrue\fR if the link is successful and \fBfalse\fR otherwise\&.
If specified, \fIlabel\fR is used to uniquely mark the results in the generated
log\&.
.TP
\fB::critcl::msg\fR ?\fB-nonewline\fR? \fImsg\fR
Scripts using \fBcritcl::check\fR and \fBcritcl::checklink\fR can use this
command to report results\&.  Does nothing in \fIcompile & run\fR mode\&.  Tools
like the \fICriTcl Aplication\fR may redefine this command to implement
their own message reporting\&. For example, \fBcritcl::app\fR and any
packages built on it print messages to \fIstdout\fR\&.
.TP
\fB::critcl::print\fR ?\fB-nonewline\fR? ?\fIchan\fR? \fImsg\fR
Used by the CriTcl internals to report activity\&.  By default, effectively the
same thing as \fB::puts\fR\&.  Tools directly using either the CriTcl package or
the CriTcl application package may redefine this procedure to implement their
own output functionality\&.
.sp
For example, the newest revisions of
\fIKettle\fR [https://chiselapp\&.com/user/andreas_kupries/repository/Kettle/index]
use this to highlight build warnings\&.
.TP
\fB::critcl::compiled\fR
Returns \fBtrue\fR if the current \fICriTcl script\fR is already compiled
and \fBfalse\fR otherwise\&.
.sp
Enables a \fICriTcl script\fR used as its own Tcl companion file (see
\fBcritcl::tsources\fR) to distinguish between being sourced for compilation in
\fIcompile & run\fR mode and being sourced from either the result of
\fIgenerate package\fR mode or during the load phase of
\fIcompile & run\fR mode\&.
The result is \fBfalse\fR in the first case and \fBtrue\fR in the later two
cases\&.
.TP
\fB::critcl::compiling\fR
Returns \fBtrue\fR if a working C compiler is available and \fBfalse\fR
otherwise\&.
.TP
\fB::critcl::done\fR
Returns \fBtrue\fR when \fICriTcl script\fR has been built and
\fBfalse\fR otherwise\&.  Only useful from within a \fICriTcl script\fR\&.
Enables the Tcl parts of a \fICriTcl script\fR to distinguish between
\fIprebuilt package\fR mode and \fIcompile & run\fR mode\&.
.sp
See also \fBModes Of Operation/Use\fR\&.
.TP
\fB::critcl::failed\fR
Returns \fBtrue\fR if the \fICriTcl script\fR could not be built, and
\fBfalse\fR otherwise\&.  Forces the building of the package if it hasn't
already been done, but not its loading\&.  Thus, a \fICriTcl script\fR can
check itself for availability of the compiled components\&.  Only useful from
within a \fICriTcl script\fR\&.
.TP
\fB::critcl::load\fR
Like \fBcritcl::failed\fR except that it also forces the loading of the
generated shared library, and that it returns \fBtrue\fR on success and
\fBfalse\fR on failure\&.  Thus, a \fICriTcl script\fR can check itself for
availability of the compiled components\&.  Only useful from within a
\fICriTcl script\fR\&.
.PP
.SS "BUILD MANAGEMENT"
The following command manages global settings, i\&.e\&. configuration options which
are independent of any \fICriTcl script\fR\&.
.PP
This command should not be needed to write a \fICriTcl script\fR\&. It is
a management command which is only useful to the \fICriTcl Application\fR
or similar tools\&.
.TP
\fB::critcl::config\fR \fIoption\fR ?\fIval\fR?
Sets and returns the following global configuration options:
.RS
.TP
\fBforce\fR bool
When \fBfalse\fR (the default), the C files are not built if there is a
cached shared library\&.
.TP
\fBlines\fR bool
When \fBtrue\fR (the default), #line directives are embedded into the
generated C code\&.
.sp
This facility requires the use of a tclsh that provides
\fBinfo frame\fR\&.  Otherwise, no \fI#line\fR directives are emitted\&. The
command is supported by Tcl 8\&.5 and higher\&. It is also supported by
Tcl 8\&.4 provided that it was compiled with the define
\fB-DTCL_TIP280\fR\&. An example of such is ActiveState's ActiveTcl\&.
.sp
Developers of higher-level packages generating their own C
code, either directly or indirectly through critcl, should
also read section \fBAdvanced: Location management\fR to see how
critcl helps them in generating their directives\&.
Examples of such packages come with critcl itself\&. See
\fBcritcl::iassoc\fR and \fBcritcl::class\fR\&.
.TP
\fBtrace\fR bool
When \fBfalse\fR (the default), no code tracing the entry and exit of
CriTcl-backed commands in the \fICriTcl script\fR is inserted\&.  Insertion of
such code implicitly activates the tracing facility in general\&.  See
\fBcritcl::cutil\fR\&.
.TP
\fBI\fR path
A single global include path to use for all files\&. Not set by default\&.
.TP
\fBcombine\fR enum
.RS
.TP
\fBdynamic\fR (the default)
Object files have the suffix \fB_pic\fR\&.
.TP
\fBstatic\fR
Object files have the suffix \fB_stub\fR\&.
.TP
\fBstandalone\fR
Object files have no suffix, and the generated C files are compiled
without using Tcl/Tk stubs\&. The result are object files usable for
static linking into a \fIbig shell\fR\&.
.RE
.TP
\fBlanguage\fR string
.TP
\fBkeepsrc\fR bool
When \fBfalse\fR (the default), the generated "\fI\&.c\fR"
files are deleted after the "\fI\&.o\fR" files have been built\&.
.TP
\fBoutdir\fR directory
The directory where to place a generated shared library\&. By default, it is
placed into the \fBResult Cache\fR\&.
.RE
.PP
.SS "RESULT CACHE MANAGEMENT"
The following commands control the \fBResult Cache\fR\&.
These commands are not needed to simply write a \fICriTcl script\fR\&.
.TP
\fB::critcl::cache\fR ?path?
Sets and returns the path to the directory for the package's result cache\&.
.sp
The default location is
"\fI~/\&.critcl/[platform::generic]\fR" and usually does not
require any changes\&.
.TP
\fB::critcl::clean_cache\fR ?\fIpattern\fR\&.\&.\&.?
Cleans the result cache, i\&.e\&. removes any and all files
and directories in it\&. If one or more patterns are specified then only
the files and directories matching them are removed\&.
.PP
.SS "BUILD CONFIGURATION"
The following commands manage the build configuration, i\&.e\&. the per-platform
information about compilers, linkers, and their commandline options\&.
These commands are not needed to simply write a \fICriTcl script\fR\&.
.TP
\fB::critcl::readconfig\fR \fIpath\fR
Reads the build configuration file at \fIpath\fR and configures the package
using the information for the target platform\&.
.TP
\fB::critcl::showconfig\fR ?\fIchan\fR?
Converts the active build configuration into a human-readable string and
returns it, or if \fIchan\fR is provided prints the result to that channel\&.
.TP
\fB::critcl::showallconfig\fR ?\fIchan\fR?
Converts the set of all known build configurations from the currently active
build configuration file last set with \fBcritcl::readconfig\fR into a string
and returns it, or if \fIchan\fR is provided, prints it to that channel\&.
.TP
\fB::critcl::chooseconfig\fR \fItarget\fR ?\fInomatcherr\fR?
Matches \fItarget\fR against all known targets, returning a list containing
all the matching ones\&. This search is first done on an exact basis, and then
via glob matching\&. If no known target matches the argument the default is to
return an empty list\&. However, if the boolean \fInomatcherr\fR is specified and
set an error is thrown using \fBcritcl::error\fR instead\&.
.TP
\fB::critcl::setconfig\fR \fItarget\fR
Configures the package to use the settings of \fItarget\fR\&.
.PP
.SS "TOOL API"
The following commands provide tools like
\fICriTcl Application\fR or similar with
deeper access to the package's internals\&.
These commands are not needed to simply write a \fICriTcl script\fR\&.
.TP
\fB::critcl::actualtarget\fR
Returns the platform identifier for the target platform, i\&.e\&. the platform to
build for\&. Unlike \fB::critcl::targetplatform\fR this is the true target, with
any cross-compilation information resolved\&.
.TP
\fB::critcl::buildforpackage\fR ?\fIflag\fR?
Signals whether the next file is to be built for inclusion into a package\&. If
not specified the \fIflag\fR defaults to \fBtrue\fR, i\&.e\&. building for a
package\&. This disables a number of things in the backend, namely the linking of
that file into a shared library and the loading of that library\&. It is expected
that the build results are later wrapped into a larger collection\&.
.TP
\fB::critcl::cnothingtodo\fR \fIfile\fR
Checks whether there is anything to build for \fIfile\fR\&.
.TP
\fB::critcl::cresults\fR ?\fIfile\fR?
Returns information about building \fIfile\fR, or \fBinfo script\fR If
\fIfile\fR is not provided\&.
The result in question is a dictionary containing the following items:
.RS
.TP
\fBclibraries\fR
A list of external shared libraries and/or directories needed to link
\fIfile\fR\&.
.TP
\fBldflags\fR
A list of linker flags needed to link \fIfile\fR\&.
.TP
\fBlicense\fR
The text of the license for the package \fIfile\fR is located in\&.
.TP
\fBmintcl\fR
The minimum version of Tcl required by the package \fIfile\fR
is in to run successfully\&. A proper Tcl version number\&.
.TP
\fBobjects\fR
A list of object files to link into \fIfile\fR\&.
.TP
\fBpreload\fR
A list of libraries to be preloaded in order to sucessfully load and use
\fIfile\fR\&.
.TP
\fBtk\fR
\fBtrue\fR if \fIfile\fR requires Tk and \fBfalse\fR otherwise\&.
.TP
\fBtsources\fR
A list of companion "\fI\&.tcl\fR" files to source in order to load and use the
\fICriTcl script\fR \fIfile\fR\&.
.TP
\fBlog\fR
The full build log generated by the compiler/linker, including command
line data from critcl, and other things\&.
.TP
\fBexl\fR
The raw build log generated by the compiler/linker\&. Contains the output
generated by the invoked applications\&.
.RE
.TP
\fB::critcl::crosscheck\fR
Determines whether the package is configured for cross-compilation and prints a
message to the standard error channel if so\&.
.TP
\fB::critcl::error\fR \fImsg\fR
Used to report internal errors\&. The default implementation simply returns the
error\&.  Tools like the \fICriTcl Application\fR are allowed to redefine
this procedure to perform their own way of error reporting\&. There is
one constraint they are not allowed to change: The procedure must
\fInot return\fR to the caller\&.
.TP
\fB::critcl::knowntargets\fR
Returns a list of the identifiers of all targets
found during the last invocation of \fBcritcl::readconfig\fR\&.
.TP
\fB::critcl::sharedlibext\fR
Returns the file extension for shared libraries on the target platform\&.
.TP
\fB::critcl::targetconfig\fR
Returns the identifier of the target to build for, as specified by either the
user or the system\&.
.TP
\fB::critcl::buildplatform\fR
Returns the identifier of the build platform, i\&.e\&. where the package is running
on\&.
.TP
\fB::critcl::targetplatform\fR
Returns the identifier of the target platform,
i\&.e\&. the platform to compile for\&. In contrast to
\fB::critcl::actualtarget\fR this may be the name of a
cross-compilation target\&.
.TP
\fB::critcl::cobjects\fR ?\fIglob pattern\fR\&.\&.\&.?
Like \fB::critcl::clibraries\fR, but instead of matching libraries, each
\fIglob pattern\fR matches object files to be linked into the
shared object (at compile time, not runtime)\&. If a \fIglob pattern\fR matches
nothing an error is returned\&.
Not listed in \fBControl & Interface\fR because it is of no use to
package writers\&. Only tools like the \fICriTcl Application\fR need it\&.
.sp
A pattern for a relative path is resolved relative to the directory
containing the \fICriTcl script\fR\&.
.sp
Calls to this command are cumulative\&.
.TP
\fB::critcl::scan\fR \fIpath\fR
The main entry point to CriTcl's static code scanner\&.  Used by tools to
implement processing modes like the assembly of a directory hierarchy
containing a TEA-lookalike buildystem, etc\&.
.sp
Scans \fIpath\fR and returns a dictionary containing the following items:
.RS
.TP
version
Package version\&.
.TP
org
Author(ing organization)\&.
.TP
files
List of the companion files, relative to the directory of the input
file\&.
.RE
.TP
\fB::critcl::name2c\fR \fIname\fR
Given the Tcl-level identifier \fIname\fR, returns a list containing the
following details of its conversion to C:
.RS
.IP \(bu
Tcl namespace prefix
.IP \(bu
C namespace prefix
.IP \(bu
Tcl base name
.IP \(bu
C base name
.RE
.sp
For use by utilities that provide Tcl commands without going through
standard commands like \fBcritcl::ccommand\fR or \fBcritcl::cproc\fR\&.
\fBcritcl::class\fR does this\&.
.PP
.SS "ADVANCED: EMBEDDED C CODE"
For advanced use, the following commands used by \fBcritcl::cproc\fR itself are
exposed\&.
.TP
\fB::critcl::argnames\fR \fIarguments\fR
Given an argument declaration as documented for \fBcritcl::cproc\fR, returns a list of the corresponding user-visible names\&.
.TP
\fB::critcl::argcnames\fR \fIarguments\fR
Given an argument declaration as documented for \fBcritcl::cproc\fR, returns a list of the corresponding C variable names for the
user-visible names\&. The names returned here match the names used in the
declarations and code returned by \fB::critcl::argvardecls\fR and
\fB::critcl::argconversion\fR\&.
.TP
\fB::critcl::argcsignature\fR \fIarguments\fR
Given an argument declaration as documented for \fBcritcl::cproc\fR, returns a list of the corresponding C parameter declarations\&.
.TP
\fB::critcl::argvardecls\fR \fIarguments\fR
Given an argument declaration as documented for \fBcritcl::cproc\fR, returns a list of the corresponding C variable declarations\&.
The names used in these declarations match the names returned by
\fB::critcl::argcnames\fR\&.
.TP
\fB::critcl::argconversion\fR \fIarguments\fR ?\fIn\fR?
Given an argument declaration as documented for \fBcritcl::cproc\fR, returns a list of C code fragments converting the user visible
arguments found in the declaration from Tcl_Obj* to C types\&. The names used in
these statements match the names returned by \fB::critcl::argcnames\fR\&.
.sp
The generated code assumes that the procedure arguments start
at index \fIn\fR of the \fBobjv\fR array\&.  The default is \fB1\fR\&.
.TP
\fB::critcl::argoptional\fR \fIarguments\fR
Given an argument declaration as documented for \fBcritcl::cproc\fR, returns a list of boolean values indicating which arguments
are optional (\fBtrue\fR), and which are not (\fBfalse\fR)\&.
.TP
\fB::critcl::argdefaults\fR \fIarguments\fR
Given an argument declaration as documented for \fBcritcl::cproc\fR, returns a list containing the default values for all optional
arguments\&.
.TP
\fB::critcl::argsupport\fR \fIarguments\fR
Given an argument declaration as documented for \fBcritcl::cproc\fR, returns a list of C code fragments needed to define the
necessary supporting types\&.
.PP
.SS "CUSTOM BUILD CONFIGURATION"
This package provides one command for the management of
package-specific, i\&.e\&. developer-specified custom build configuration
options\&.
.TP
\fB::critcl::userconfig\fR \fBdefine\fR \fIname\fR \fIdescription\fR \fItype\fR ?\fIdefault\fR?
This command defines custom build configuration option, with
\fIdescription\fR, \fItype\fR and optional \fIdefault\fR value\&.
.sp
The type can be either \fBbool\fR, or a list of values\&.
.RS
.IP [1]
For \fBbool\fR the default value, if specified, must be a
boolean\&. If it is not specified it defaults to \fBtrue\fR\&.
.IP [2]
For a list of values the default value, if specified, must be a
value found in this list\&. If it is not specified it defaults to the
first value of the list\&.
.RE
.sp
The \fIdescription\fR serves as in-code documentation of the
meaning of the option and is otherwise ignored\&. When generating a TEA
wrapper the description is used for the \fBconfigure\fR option
derived from the option declared by the command\&.
.sp
A boolean option \fBFOO\fR are translated into a pair of
configure options, \fB--enable-\fBFOO\fR\fR and
\fB--disable-\fBFOO\fR\fR, whereas an option whose \fItype\fR is a
list of values is translated into a single configure option
\fB--with-\fBFOO\fR\fR\&.
.TP
\fB::critcl::userconfig\fR \fBquery\fR \fIname\fR
This command queries the database of custom build configuration option
for the current "\fI\&.critcl\fR" file and returns the chosen value\&.
This may be the default if no value was set via
\fB::critcl::userconfig set\fR\&.
.sp
It is at this point that definitions and set values are brought
together, with the latter validated against the definition\&.
.TP
\fB::critcl::userconfig\fR \fBset\fR \fIname\fR \fIvalue\fR
This command is for use by a tool, like the \fBcritcl\fR application,
to specify values for custom build configuration options\&.
.sp
At the time this command is used only the association between
option name and value is recorded, and nothing else is done\&. This
behaviour is necessary as the system may not know if an option of the
specified name exists when the command is invoked, nor its type\&.
.sp
Any and all validation is defered to when the value of an
option is asked for via \fB::critcl::userconfig query\fR\&.
.sp
This means that it is possible to set values for any option we
like, and the value will take effect only if such an option is both
defined and used later on\&.
.PP
.SS "ADVANCED: LOCATION MANAGEMENT"
First a small introduction for whose asking themselves
\'what is location management' ?
.PP
By default critcl embeds \fI#line\fR directives into the
generated C code so that any errors, warnings and notes found by the C
compiler during compilation will refer to the "\fI\&.critcl\fR" file the
faulty code comes from, instead of the generated "\fI\&.c\fR" file\&.
.PP
This facility requires the use of a tclsh that provides
\fBinfo frame\fR\&.  Otherwise, no \fI#line\fR directives are emitted\&. The
command is supported by Tcl 8\&.5 and higher\&. It is also supported by
Tcl 8\&.4 provided that it was compiled with the define
\fB-DTCL_TIP280\fR\&. An example of such is ActiveState's ActiveTcl\&.
.PP
Most users will not care about this feature beyond simply
wanting it to work and getting proper code references when reading
compiler output\&.
.PP
Developers of higher-level packages generating their own C code
however should care about this, to ensure that their generated code
contains proper references as well\&. Especially as this is key to
separating bugs concerning code generated by the package itself and
bug in the user's code going into the package, if any\&.
.PP
Examples of such packages come with critcl itself, see the
implementation of packages \fBcritcl::iassoc\fR and
\fBcritcl::class\fR\&.
.PP
To help such developers eight commands are provided to manage
such \fIlocation\fR information\&. These are listed below\&.
.PP
A main concept is that they all operate on a single
\fIstored location\fR, setting, returning and clearing it\&.
Note that this location information is completely independent of the
generation of \fI#line\fR directives within critcl itself\&.
.TP
\fB::critcl::at::caller\fR
This command stores the location of the caller of the current
procedure as a tuple of file name and linenumber\&. Any previously
stored location is overwritten\&.
The result of the command is the empty string\&.
.TP
\fB::critcl::at::caller\fR \fIoffset\fR
As above, the stored line number is modified by the specified
offset\&. In essence an implicit call of \fBcritcl::at::incr\fR\&.
.TP
\fB::critcl::at::caller\fR \fIoffset\fR \fIlevel\fR
As above, but the level the location information is taken from is
modified as well\&. Level \fB0\fR is the caller, \fB-1\fR its
caller, etc\&.
.TP
\fB::critcl::at::here\fR
This command stores the current location in the current procedure as a
tuple of file name and linenumber\&. Any previously stored location is
overwritten\&.
The result of the command is the empty string\&.
.sp
In terms of \fB::critcl::at::caller\fR this is equivalent to
.CS


	critcl::at::caller 0 1

.CE
.TP
\fB::critcl::at::get*\fR
This command takes the stored location and returns a formatted
\fI#line\fR directive ready for embedding into some C code\&. The
stored location is left untouched\&.
Note that the directive contains its own closing newline\&.
.sp
For proper nesting and use it is recommended that such
directives are always added to the beginning of a code fragment\&. This
way, should deeper layers add their own directives these will come
before ours and thus be inactive\&. End result is that the outermost
layer generating a directive will 'win', i\&.e\&. have its directive
used\&. As it should be\&.
.TP
\fB::critcl::at::get\fR
This command is like the above, except that it also clears the stored
location\&.
.TP
\fB::critcl::at::=\fR \fIfile\fR \fIline\fR
This command allows the caller to set the stored location to anything
they want, outside of critcl's control\&.
The result of the command is the empty string\&.
.TP
\fB::critcl::at::incr\fR \fIn\fR\&.\&.\&.
.TP
\fB::critcl::at::incrt\fR \fIstr\fR\&.\&.\&.
These commands allow the user to modify the line number of the stored
location, changing it incrementally\&. The increment is specified as
either a series of integer numbers (\fBincr\fR), or a series of
strings to consider (\fBincrt\fR)\&. In case of the latter the delta is
the number of lines endings found in the strings\&.
.TP
\fB::critcl::at::caller!\fR
.TP
\fB::critcl::at::caller!\fR \fIoffset\fR
.TP
\fB::critcl::at::caller!\fR \fIoffset\fR \fIlevel\fR
.TP
\fB::critcl::at::here!\fR
These are convenience commands combining \fBcaller\fR and \fBhere\fR
with \fBget\fR\&. I\&.e\&. they store the location and immediately return it
formatted as proper \fI#line\fR directive\&. Also note that after their
use the stored location is cleared\&.
.PP
.SS "ADVANCED: DIVERSIONS"
Diversions are for higher-level packages generating their own C code,
to make their use of critcl's commands generating
\fBEmbedded C Code\fR easier\&.
.PP
These commands normally generate all of their C code for the
current "\fI\&.critcl\fR" file, which may not be what is wanted by a
higher-level package\&.
.PP
With a diversion the generator output can be redirected into
memory and from there on then handled and processed as the caller
desires before it is committed to an actual "\fI\&.c\fR" file\&.
.PP
An example of such a package comes with critcl itself, see the
implementation of package \fBcritcl::class\fR\&.
.PP
To help such developers three commands are provided to manage
diversions and the collection of C code in memory\&. These are:
.TP
\fB::critcl::collect_begin\fR
This command starts the diversion of C code collection into memory\&.
.sp
The result of the command is the empty string\&.
.sp
Multiple calls are allowed, with each call opening a new
nesting level of diversion\&.
.TP
\fB::critcl::collect_end\fR
This command end the diversion of C code collection into memory and
returns the collected C code\&.
.sp
If multiple levels of diversion are open the call only closes
and returns the data from the last level\&.
.sp
The command will throw an error if no diversion is active,
indicating a mismatch in the pairing of \fBcollect_begin\fR and
\fBcollect_end\fR\&.
.TP
\fB::critcl::collect\fR \fIscript\fR
This is a convenience command which runs the \fIscript\fR under
diversion and returns the collected C code, ensuring the correct
pairing of \fBcollect_begin\fR and \fBcollect_end\fR\&.
.PP
.SS "ADVANCED: FILE GENERATION"
While file generation is related to the diversions explained in the
previous section they are not the same\&.
Even so, like diversions this feature is for higher-level packages
generating their own C code\&.
.PP
Three examples of utility packages using this facility comes
with critcl itself\&.
See the implementations of packages \fBcritcl::literals\fR,
\fBcritcl::bitmap\fR, and \fBcritcl::enum\fR\&.
.PP
When splitting a package implementation into pieces it is often
sensible to have a number of pure C companion files containing
low-level code, yet these files may require information about the code
in the main "\fI\&.critcl\fR" file\&. Such declarations are normally not
exportable and using the stub table support does not make sense, as
this is completely internal to the package\&.
.PP
With the file generation command below the main "\fI\&.critcl\fR"
file can generate any number of header files for the C companions to
pick up\&.
.TP
\fB::critcl::make\fR \fIpath\fR \fIcontents\fR
This command creates the file \fIpath\fR in a location where the C
companion files of the package are able to pick it up by simple
inclusion of \fIpath\fR during their compilation, without interfering
with the outer system at all\&.
.sp
The generated file will contain the specified \fIcontents\fR\&.
.PP
.SH CONCEPTS
.SS "MODES OF OPERATION/USE"
CriTcl can be used in three different modes of operation, called
.IP [1]
\fICompile & Run\fR, and
.IP [2]
\fIGenerate Package\fR
.IP [3]
\fIGenerate TEA Package\fR
.PP
\fICompile & Run\fR was the original mode and is the default for
\fIcritcl_pkg\fR\&.  Collects the C fragments from the
\fICriTcl script\fR, builds them as needed, and caches the results to
improve load times later\&.
.PP
The second mode, \fIGenerate Package\fR, was introduced to enable
the creation of (prebuilt) deliverable packages which do not depend on
the existence of a build system, i\&.e\&. C compiler, on the target
machine\&.
This was originally done through the experimental \fBCritbind\fR tool,
and is now handled by the \fICriTcl Application\fR, also named
\fBcritcl\fR\&.
.PP
Newly introduced with CriTcl version 3 is
\fIGenerate TEA Package\fR\&. This mode constructs a directory
hierarchy from the package which can later be built like a regular TEA
package, i\&.e\&. using
.CS


	\&.\&.\&./configure --prefix \&.\&.\&.
	make all isntall

.CE
.PP
Regarding the caching of results please read the section about
the \fBResult Cache\fR fore more details\&.
.SS "RUNTIME BEHAVIOUR"
The default behaviour of critcl, the package is to defer the
compilation, linking, and loading of any C code as much as possible,
given that this is an expensive operation, mainly in the time
required\&.
In other words, the C code embedded into a "\fI\&.critcl\fR" file is
built only when the first C command or procedure it provides is
invoked\&.
This part of the system uses standard functionality built into the Tcl
core, i\&.e\&. the \fBauto_index\fR variable to map from commands to
scripts providing them and the \fBunknown\fR command using this
information when the command is needed\&.
.PP
A \fIlimitation\fR of this behaviour is that it is not
possible to just use \fBinfo commands\fR check for the existence of
a critcl defined command\&. It is also necessary to search in the
\fBauto_index\fR array, in case it has not been build yet\&.
.PP
This behaviour can be changed by using the control command
\fBcritcl::load\fR\&. When invoked, the building, including loading of
the result, is forced\&. After this command has been invoked for a
"\fI\&.critcl\fR" file further definition of C code in this file is not
allowed any longer\&.
.SS "FILE MAPPING"
Each "\fI\&.critcl\fR" file is backed by a single private "\fI\&.c\fR" file
containing that code, plus the boilerplate necessary for its
compilation and linking as a single shared library\&.
.PP
The \fBEmbedded C Code\fR
fragments appear in that file in the exact same order they were
defined in the "\fI\&.critcl\fR" file, with one exception\&. The C code
provided via \fBcritcl::cinit\fR is put after all other fragments\&.
In other words all fragments have access to the symbols defined by
earlier fragments, and the \fBcritcl::cinit\fR fragment has access to
all, regardless of its placement in the "\fI\&.critcl\fR" file\&.
.PP
Note: A \fIlimitation\fR of the current system is the near
impossibility of C level access between different critcl-based
packages\&. The issue is not the necessity of writing and sharing the
proper \fBextern\fR statements, but that the management (export and
import) of package-specific stubs-tables is not supported\&. This means
that dependent parts have to be forcibly loaded before their user,
with all that entails\&. See section \fBRuntime Behaviour\fR for
the relevant critcl limitation, and remember that many older platforms
do not support the necessary resolution of symbols, the reason why
stubs were invented for Tcl in the first place\&.
.SS "RESULT CACHE"
The compilation of C code is time-consuming \fBcritcl\fR not only
defers it as much as possible, as described in section
\fBRuntime Behaviour\fR, but also caches the results\&.
.PP
This means that on the first use of a "\fI\&.critcl\fR" file
"\fIFOO\&.tcl\fR" the resulting object file and shared library are saved
into the cache, and on future uses of the same file reused,
i\&.e\&. loaded directly without requiring compilation, provided that the
contents of "\fIFOO\&.tcl\fR" did not change\&.
.PP
The change detection is based MD5 hashes\&. A single hash is
computed for each "\fI\&.critcl\fR" file, based on hashes for all C code
fragments and configuration options, i\&.e\&. everything which affects the
resulting binary\&.
.PP
As long as the input file doesn't change as per the hash a
previously built shared library found in the cache is reused,
bypassing the compilation and link stages\&.
.PP
The command to manage the cache are found in section
\fBResult Cache Management\fR\&.
Note however that they are useful only to tools based on the package,
like the \fICriTcl Application\fR\&. Package writers have no need
of them\&.
.PP
As a last note, the default directory for the cache is chosen
based on the chosen build target\&. This means that the cache can be put
on a shared (network) filesystem without having to fear interference
between machines of different architectures\&.
.SS "PRELOADING FUNCTIONALITY"
The audience of this section are developers wishing to understand
and possibly modify the internals of critcl package and application\&.
Package writers can skip this section\&.
.PP
It explains how the preloading of external libraries is realized\&.
.PP
Whenever a package declares libraries for preloading critcl will build
a supporting shared library providing a Tcl package named "preload"\&.
This package is not distributed separately, but as part of the package
requiring the preload functionality\&.
This support package exports a single Tcl command
.TP
\fB::preload\fR \fIlibrary\fR
which is invoked once per libraries to preload, with the absolute path
of that \fIlibrary\fR\&. The command then loads the \fIlibrary\fR\&.
.sp
On windows the command will further use the Tcl command
\fB::critcl::runtime::precopy\fR to copy the \fIlibrary\fR to the
disk, should its path be in a virtual filesystem which doesn't
directly support the loading of a shared library from it\&.
.PP
The command \fB::critcl::runtime::precopy\fR is provided by the file
"\fIcritcl-rt\&.tcl\fR" in the generated package, as is the command
\fB::critcl::runtime::loadlib\fR which generates the
\fIifneeded script\fR expected by Tcl's package management\&. This
generated ifneeded script contains the invocations of \fB::preload\fR\&.
.PP
The C code for the supporting library is found in the file
"\fIcritcl_c/preload\&.c\fR", which is part of the \fBcritcl\fR
package\&.
.PP
The Tcl code for the supporting runtime "\fIcritcl-rt\&.tcl\fR" is found
in the file "\fIruntime\&.tcl\fR", which is part of the
\fBcritcl::app\fR package\&.
.SS "CONFIGURATION INTERNALS"
The audience of this section are developers wishing to understand
and possibly modify the internals of critcl package and application\&.
Package writers can skip this section\&.
.PP
It explains the syntax of configuration files and the configuration
keys used by \fBcritcl\fR to configure its build backend, i\&.e\&. how
this part of the system accesses compiler, linker, etc\&.
.PP
It is recommended to open the file containing the standard
configurations ("\fIpath/to/critcl/Config\fR") in the editor of your
choice when reading this section of the documentation, using it as an
extended set of examples going beyond the simple defaults shown here\&.
.PP
First, the keys and the meaning of their values, plus examples drawn
from the standard configurations distributed with the package\&.
Note that when writing a custom configuration it is not necessary to
specify all the keys listed below, but only those whose default values
are wrong or insufficient for the platform in question\&.
.TP
version
The command to print the compiler version number\&.
Defaults to
.CS

 gcc -v
.CE
.TP
compile
The command to compile a single C source file to an object file\&.
Defaults to
.CS

 gcc -c -fPIC
.CE
.TP
debug_memory
The list of flags for the compiler to enable memory debugging in
Tcl\&.
Defaults to
.CS

 -DTCL_MEM_DEBUG
.CE
.TP
debug_symbols
The list of flags for the compiler to add symbols to the object files
and the resulting library\&.
Defaults to
.CS

 -g
.CE
.TP
include
The compiler flag to add an include directory\&.
Defaults to
.CS

 -I
.CE
.TP
tclstubs
The compiler flag to set USE_TCL_STUBS\&.
Defaults to
.CS

 -DUSE_TCL_STUBS
.CE
.TP
tkstubs
The compiler flag to set USE_TK_STUBS\&.
Defaults to
.CS

 -DUSE_TK_STUBS
.CE
.TP
threadflags
The list of compiler flags to enable a threaded build\&.
Defaults to
.CS


    -DUSE_THREAD_ALLOC=1 -D_REENTRANT=1 -D_THREAD_SAFE=1
    -DHAVE_PTHREAD_ATTR_SETSTACKSIZE=1 -DHAVE_READDIR_R=1
    -DTCL_THREADS=1

.CE
.IP\&.
.TP
noassert
The compiler flag to turn off assertions in Tcl code\&.
Defaults to
.CS

 -DNDEBUG
.CE
.TP
optimize
The compiler flag to specify optimization level\&.
Defaults to
.CS

 -O2
.CE
.TP
output
The compiler flags to set the output file of a compilation\&.
Defaults to
.CS

 -o [list $outfile]
.CE
.sp
\fINOTE\fR the use of Tcl commands and variables here\&.  At the
time \fBcritcl\fR uses the value of this key the value of the
referenced variable is substituted into it\&. The named variable is the
only variable whose value is defined for this substitution\&.
.TP
object
The file extension for object files on the platform\&.
Defaults to
.CS

 \&.o
.CE
.TP
preproc_define
The command to preprocess a C source file without compiling it, but
leaving #define's in the output\&. Defaults to
.CS

 gcc -E -dM
.CE
.TP
preproc_enum
See \fBpreproc_define\fR, except that #define's are not left in the
output\&. Defaults to
.CS

 gcc -E
.CE
.TP
link
The command to link one or more object files and create a shared
library\&. Defaults to
.CS

 gcc -shared
.CE
.TP
link_preload
The list of linker flags to use when dependent libraries are
pre-loaded\&. Defaults to
.CS

 --unresolved-symbols=ignore-in-shared-libs
.CE
.TP
strip
The flag to tell the linker to strip symbols from the shared library\&.
Defaults to
.CS

 -Wl,-s
.CE
.TP
ldoutput
Like \fBoutput\fR, but for the linker\&.
Defaults to the value of \fBoutput\fR\&.
.TP
link_debug
The list of linker flags needed to build a shared library with
symbols\&. Defaults to the empty string\&.
One platform requiring this are all variants of Windows, which uses
.CS

 -debug:full -debugtype:cv
.CE
.TP
link_release
The list of linker flags needed to build a shared library without
symbols, i\&.e\&. a regular build\&. Defaults to the empty string\&.
One platform requiring this are all variants of Windows, which uses
.CS

 -release -opt:ref -opt:icf,3 -ws:aggressive
.CE
.TP
sharedlibext
The file extension for shared library files on the platform\&.
Defaults to
.CS

 [info sharedlibextension]
.CE
.TP
platform
The identifier of the platform used in generated packages\&.
Defaults to
.CS

 [platform::generic]
.CE
.TP
target
The presence of this key marks the configuration as a
cross-compilation target and the value is the actual platform
identifier of the target\&.  No default\&.
.PP
.PP
The syntax expected from configuration files is governed by the rules below\&.
Again, it is recommended to open the file containing the standard
configurations ("\fIpath/to/critcl/Config\fR") in the editor of your
choice when reading this section of the documentation, using it as an
extended set of examples for the syntax>
.IP [1]
Each logical line of the configuration file consists of one or
more physical lines\&. In case of the latter the physical lines have to
follow each other and all but the first must be marked by a trailing
backslash\&. This is the same marker for \fIcontinuation lines\fR as
used by Tcl itself\&.
.IP [2]
A (logical) line starting with the character "#" (modulo
whitespace) is a comment which runs until the end of the line, and is
otherwise ignored\&.
.IP [3]
A (logical) line starting with the word "if" (modulo
whitespace) is interpreted as Tcl's \fBif\fR command and executed as
such\&. I\&.e\&. this command has to follow Tcl's syntax for the command,
which may stretch across multiple logical lines\&. The command will be
run in a save interpreter\&.
.IP [4]
A (logical) line starting with the word "set" (modulo
whitespace) is interpreted as Tcl's \fBset\fR command and executed as
such\&. I\&.e\&. this command has to follow Tcl's syntax for the command,
which may stretch across multiple logical lines\&. The command will be
run in a save interpreter\&.
.IP [5]
A line of the form "\fIplatform\fR \fBvariable\fR \fIvalue\fR"
defines a platform specific configuration variable and value\&.
The \fBvariable\fR has to be the name of one of the configuration keys
listed earlier in this section, and the \fIplatform\fR string
identifies the platform the setting is for\&. All settings with the same
identification string form the \fIconfiguration block\fR for this
platform\&.
.IP [6]
A line of the special form
"\fIplatform\fR \fBwhen\fR \fIexpression\fR"
marks the \fIplatform\fR and all the settings in its
\fIconfiguration block\fR as conditional on the \fIexpression\fR\&.
.sp
If the build platform is not a prefix of \fIplatform\fR,
nor vice versa the whole block is ignored\&.
Otherwise the \fIexpression\fR is evaluated via \fBexpr\fR, in the
same safe interpreter used to run any \fBset\fR and \fBif\fR commands
found in the configuration file (see above)\&.
.sp
If the expression evaluates to \fBtrue\fR this configuration block
is considered to be the build platform fo the host and chosen as the
default configuration\&.
An large example of of this feature is the handling of OS X found in
the standard configuration file, where it selects the architectures to
build based on the version of the operating system, the available SDK,
etc\&. I\&.e\&. it chooses whether the output is universal or not, and
whether it is old-style (ix86 + ppc) versus new-style (ix86 32+64) of
universality\&.
.IP [7]
A line of the special form
"\fIplatform\fR \fBcopy\fR \fIsourceplatform\fR"
copies the configuration variables and values currently defined in the
\fIconfiguration block\fR for \fIsourceplatform\fR to that of
\fIplatform\fR, overwriting existing values, and creating missing
ones\&. Variables of \fIplatform\fR not defined by by \fIsourceplatform\fR
are not touched\&.
.sp
The copied values can be overridden later in the configuration
file\&. Multiple \fBcopy\fR lines may exist for a platform and be
intermixed with normal configuration definitions\&. Only the last definition of a
variable is used\&.
.IP [8]
At last, a line of the form "\fBvariable\fR \fIvalue\fR"
defines a default configuration variable and value\&.
.PP
.SS "STUBS TABLES"		This section is for developers of extensions not based on critcl, yet
also wishing to interface with stubs as they are understood and used
by critcl, either by exporting their own stubs table to a
critcl-based extension, or importing a stubs table of a critcl-based
extension into their own\&.
.PP
To this end we describe the stubs table information of a
package \fBfoo\fR\&.
.IP [1]
Note that the differences in the capitalization of "foo",
"Foo", "FOO", etc\&. below demonstrate how to capitalize the actual
package name in each context\&.
.IP [2]
All relevant files must be available in a sub-directory
"\fIfoo\fR" which can be found on the include search paths\&.
.IP [3]
The above directory may contain a file "\fIfoo\&.decls\fR"\&. If
present it is assumed to contain the external representation
of the stubs table the headers mentioned in the following
items are based on\&.
.sp
critcl is able to use such a file to give the importing package
programmatic access to the imported API, for automatic code
generation and the like\&.
.IP [4]
The above directory must contain a header file
"\fIfooDecls\&.h\fR"\&. This file \fIdeclares\fR the exported API\&.
It is used by both exporting and importing packages\&. It is usually
generated and must contain (in the order specified):
.RS
.IP [1]
the declarations of the exported, i\&.e\&. public, functions of
\fBfoo\fR,
.IP [2]
the declaration of structure "FooStubs" for the stub table,
.IP [3]
the C preprocessor macros which route the invocations of the
public functions through the stubs table\&.
.sp
These macros must be defined if, and only if, the C preprocessor
macro USE_FOO_STUBS is defined\&. Package \fBfoo\fR does not
define this macro, as it is allowed to use the exported
functions directly\&. All importing packages however must define
this macro, to ensure that they do \fInot\fR use any of the
exported functions directly, but only through the stubs table\&.
.IP [4]
If the exported functions need additional types for their proper
declaration then these types should be put into a separate
header file (of arbitrary name) and "\fIfooDecls\&.h\fR" should
contain an #include directive to this header at the top\&.
.RE
.sp
A very reduced, yet also complete example, from a package for
low-level random number generator functions can be found at the end of
this section\&.
.IP [5]
The above directory must contain a header file
"\fIfooStubLib\&.h\fR"\&. This file \fIdefines\fR everything needed to use
the API of \fBfoo\fR\&. Consequently it is used only by importing
packages\&. It is usually generated and must contain (in the order
specified):
.RS
.IP [1]
An #include directive for "\fItcl\&.h\fR", with USE_TCL_STUBS
surely defined\&.
.IP [2]
An #include directive for "\fIfooDecls\&.h\fR", with USE_FOO_STUBS
surely defined\&.
.IP [3]
A \fIdefinition\fR of the stubs table variable, i\&.e\&.
.CS

const FooStubs* fooStubsPtr;
.CE
.IP [4]
A \fIdefinition\fR of the stubs initializer function, like
.CS

char *
Foo_InitStubs(Tcl_Interp *interp, CONST char *version, int exact)
{
    /*
     * Boiler plate C code initalizing the stubs table variable,
     * i\&.e\&. "fooStubsPtr"\&.
     */

    CONST char *actualVersion;

    actualVersion = Tcl_PkgRequireEx(interp, "foo", version,
				     exact, (ClientData *) &fooStubsPtr);

    if (!actualVersion) {
	return NULL;
    }

    if (!fooStubsPtr) {
	Tcl_SetResult(interp,
		      "This implementation of Foo does not support stubs",
		      TCL_STATIC);
	return NULL;
    }

    return (char*) actualVersion;
}
.CE
.RE
.IP
This header file must be included by an importing package
\fIexactly once\fR, so that it contains only one definition of both
stubs table and stubs initializer function\&.
.sp
The importing package's initialization function must further
contain a statement like
.CS

if (!Foo_InitStubs (ip, "1", 0)) {
    return TCL_ERROR;
}
.CE
.IP
which invokes \fBfoo\fR's stubs initializer function to set the
local stub table up\&.
.sp
For a complete example of such a header file see below, at the
end of this section\&.
.IP [6]
The last item above, about "\fIfooStubLib\&.h\fR" \fIdiffers\fR
from the regular stub stable system used by Tcl\&. The regular
system assumes that a static library "\fIlibfoostub\&.a\fR" was
installed by package \fBfoo\fR, and links it\&.
.sp
IMVHO critcl's approach is simpler, using \fIonly\fR header
files found in a single location, vs\&. header files and static
library found in multiple, different locations\&.
.sp
A second simplification is that we avoid having to extend
critcl's compiler backend with settings for the creation of
static libraries\&.
.PP
Below is a complete set of example header files, reduced, yet still
complete, from a package for low-level random number generator
functions:
.TP
"\fIrngDecls\&.h\fR":
.CS


#ifndef rng_DECLS_H
#define rng_DECLS_H

#include <tcl\&.h>

/*
 * Exported function declarations:
 */

/* 0 */
EXTERN void rng_bernoulli(double p, int*v);

typedef struct RngStubs {
    int magic;
    const struct RngStubHooks *hooks;

    void (*rng_bernoulli) (double p, int*v); /* 0 */
} RngStubs;

#ifdef __cplusplus
extern "C" {
#endif
extern const RngStubs *rngStubsPtr;
#ifdef __cplusplus
}
#endif

#if defined(USE_RNG_STUBS)

/*
 * Inline function declarations:
 */

#define rng_bernoulli  (rngStubsPtr->rng_bernoulli) /* 0 */

#endif /* defined(USE_RNG_STUBS) */
#endif /* rng_DECLS_H */


.CE
.TP
"\fIrngStubLib\&.h\fR":
.CS


/*
 * rngStubLib\&.c --
 *
 * Stub object that will be statically linked into extensions that wish
 * to access rng\&.
 */

#ifndef USE_TCL_STUBS
#define USE_TCL_STUBS
#endif
#undef  USE_TCL_STUB_PROCS

#include <tcl\&.h>

#ifndef USE_RNG_STUBS
#define USE_RNG_STUBS
#endif
#undef  USE_RNG_STUB_PROCS

#include "rngDecls\&.h"

/*
 * Ensure that Rng_InitStubs is built as an exported symbol\&.  The other stub
 * functions should be built as non-exported symbols\&.
 */

#undef  TCL_STORAGE_CLASS
#define TCL_STORAGE_CLASS DLLEXPORT

const RngStubs* rngStubsPtr;

/*
 *----------------------------------------------------------------------
 *
 * Rng_InitStubs --
 *
 * Checks that the correct version of Rng is loaded and that it
 * supports stubs\&. It then initialises the stub table pointers\&.
 *
 * Results:
 *  The actual version of Rng that satisfies the request, or
 *  NULL to indicate that an error occurred\&.
 *
 * Side effects:
 *  Sets the stub table pointers\&.
 *
 *----------------------------------------------------------------------
 */

#ifdef Rng_InitStubs
#undef Rng_InitStubs
#endif

char *
Rng_InitStubs(Tcl_Interp *interp, CONST char *version, int exact)
{
    CONST char *actualVersion;

    actualVersion = Tcl_PkgRequireEx(interp, "rng", version,
				     exact, (ClientData *) &rngStubsPtr);
    if (!actualVersion) {
	return NULL;
    }

    if (!rngStubsPtr) {
	Tcl_SetResult(interp,
		      "This implementation of Rng does not support stubs",
		      TCL_STATIC);
	return NULL;
    }

    return (char*) actualVersion;
}

.CE
.PP
.SH EXAMPLES
See section "Embedding C" in \fIUsing CriTcl\fR\&.
.SH AUTHORS
Jean Claude Wippler, Steve Landers, Andreas Kupries
.SH "BUGS, IDEAS, FEEDBACK"
This document, and the package it describes, will undoubtedly contain
bugs and other problems\&.
Please report them at \fIhttps://github\&.com/andreas-kupries/critcl/issues\fR\&.
Ideas for enhancements you may have for either package, application,
and/or the documentation are also very welcome and should be reported
at \fIhttps://github\&.com/andreas-kupries/critcl/issues\fR as well\&.
.SH KEYWORDS
C code, Embedded C Code, calling C code from Tcl, code generator, compile & run, compiler, dynamic code generation, dynamic compilation, generate package, linker, on demand compilation, on-the-fly compilation
.SH CATEGORY
Glueing/Embedded C code
.SH COPYRIGHT
.nf
Copyright (c) Jean-Claude Wippler
Copyright (c) Steve Landers
Copyright (c) 2011-2024 Andreas Kupries

.fi