PERLTIDY(1)

NAME
perltidy - a perl script indenter and reformatter

SYNOPSIS
    perltidy [ options ] file1 file2 file3 ...
            (output goes to file1.tdy, file2.tdy, file3.tdy, ...)
    perltidy [ options ] file1 -o outfile
    perltidy [ options ] file1 -st >outfile
    perltidy [ options ] <infile >outfile

DESCRIPTION
Perltidy reads a perl script and writes an indented, reformatted script. The formatting process involves converting the script into a string of tokens, removing any non-essential whitespace, and then rewriting the string of tokens with whitespace using whatever rules are specified, or defaults. This happens in a series of operations which can be controlled with the parameters described in this document.

Perltidy is a commandline frontend to the module Perl::Tidy. For documentation describing how to call the Perl::Tidy module from other applications see the separate documentation for Perl::Tidy. It is the file Perl::Tidy.pod in the source distribution.

Many users will find enough information in "EXAMPLES" to get started. New users may benefit from the short tutorial which can be found at http://perltidy.sourceforge.net/tutorial.html

A convenient aid to systematically defining a set of style parameters can be found at http://perltidy.sourceforge.net/stylekey.html

Perltidy can produce output on either of two modes, depending on the existence of an -html flag. Without this flag, the output is passed through a formatter. The default formatting tries to follow the recommendations in perlstyle(1), but it can be controlled in detail with numerous input parameters, which are described in "FORMATTING OPTIONS". Many style variations are possible, but it is worth noting that the default style is particularly convenient for working on chunks of code with a line editor because it is easy to select a sequence of lines with balanced containers, which is necessary for formatting a snippet of code with perltidy.

When the -html flag is given, the output is passed through an HTML formatter which is described in "HTML OPTIONS".

EXAMPLES
Here are some example perltidy commands and their meanings:

•   This will produce a file somefile.pl.tdy containing the script reformatted using the default options, which approximate the style suggested in perlstyle(1). The source file somefile.pl is unchanged.

      perltidy somefile.pl

•   Execute perltidy on all .pl files in the current directory with the default options. The output will be in files with an appended .tdy extension. For any file with an error, there will be a file with extension .ERR.

      perltidy *.pl

•   Modify file1.pl and file2.pl in place, and backup the originals to file1.pl.bak and file2.pl.bak. If file1.pl.bak and/or file2.pl.bak already exist, they will be overwritten.

      perltidy -b file1.pl file2.pl

•   Same as the previous example except that the backup files file1.pl.bak and file2.pl.bak will be deleted if there are no errors.

      perltidy -b -bext='/' file1.pl file2.pl

•   Execute perltidy on file somefile.pl, with 4 columns for each level of continuation indentation (-ci=4) instead of the default 2 columns, so that it is the same as the default primary indentation (-i=4). There will not be any tabs in the reformatted script, except for any which already exist in comments, pod documents, quotes, and here documents. Output will be somefile.pl.tdy.

      perltidy -ci=4 somefile.pl

•   Same as the previous example, except that leading whitespace will be entabbed with one tab character per 4 spaces, and thus one tab for each indentation level.

      perltidy -ci=4 -et=4 somefile.pl

•   Execute perltidy on file somefile.pl with all defaults except use "cuddled elses" (-ce) and a maximum line length of 72 columns (-l=72) instead of the default 80 columns.

      perltidy -ce -l=72 somefile.pl

•   Dump a table of comma-separated metrics for subroutines longer than 10 lines to blocks.csv and immediately exit without formatting:

       perltidy -dbs -dbl=10 somefile.pl >blocks.csv

•   Dump a list of unused and reused lexical variable names to vars.txt:

        perltidy -duv somefile.pl >vars.txt

•   This will produce a file somefile.pl.html containing the script with html markup. The output file will contain an embedded style sheet in the "<HEAD"> section which may be edited to change the appearance.

      perltidy -html somefile.pl

•   This will produce a file somefile.pl.html containing the script with html markup. This output file will contain a link to a separate style sheet file mystyle.css. If the file mystyle.css does not exist, it will be created. If it exists, it will not be overwritten.

      perltidy -html -css=mystyle.css somefile.pl

•   Write an html snippet with only the "<PRE"> section to somefile.pl.html. This is useful when code snippets are being formatted for inclusion in a larger web page. No style sheet will be written in this case.

      perltidy -html -pre somefile.pl

•   Write a style sheet to mystyle.css and exit.

      perltidy -html -ss >mystyle.css

•   Write html with a frame holding a table of contents and the source code. The output files will be mymodule.pm.html (the frame), mymodule.pm.toc.html (the table of contents), and mymodule.pm.src.html (the source code).

      perltidy -html -frm mymodule.pm

OPTIONS - OVERVIEW
The entire command line is scanned for options, and they are processed before any files are processed. As a result, it does not matter whether flags are before or after any filenames. However, the relative order of parameters is important, with later parameters overriding the values of earlier parameters.

For most parameters, there is a long name and a short name. The short names are convenient for keyboard input, while the long names are self-documenting and therefore useful in scripts. It is customary to use two leading dashes for long names, but a single dash may be used for any parameter.

Most parameters which serve as on/off flags can be negated with a leading "n" (for the short name) or a leading "no" or "no-" (for the long name). For example, the flag to outdent long quotes is -olq or --outdent-long-quotes. The flag to skip this is -nolq or --nooutdent-long-quotes or --no-outdent-long-quotes.

Options may not be bundled together. In other words, options -q and -g may NOT be entered as -qg.

  I/O Control
The following parameters concern the files which are read and written.

-h,    --help
    Show summary of usage and exit.

-v,    --version
    Show perltidy VERSION number and exit.

-o=filename,    --outfile=filename
    Name of the output file (only if a single input file is being processed). If no output file is specified, and output is not redirected to the standard output (see -st), the output will go to filename.tdy. [Note: - does not redirect to standard output. Use -st instead.]

-st,    --standard-output
    Perltidy must be able to operate on an arbitrarily large number of files in a single run, with each output being directed to a different output file. Obviously this would conflict with outputting to the single standard output device, so a special flag, -st, is required to request outputting to the standard output. For example,

      perltidy somefile.pl -st >somefile.new.pl

    This option may only be used if there is just a single input file. The default is -nst or --nostandard-output.

-se,    --standard-error-output
    If perltidy detects an error when processing file somefile.pl, its default behavior is to write error messages to file somefile.pl.ERR. Use -se to cause all error messages to be sent to the standard error output stream instead. This directive may be negated with -nse. Thus, you may place -se in a .perltidyrc and override it when desired with -nse on the command line.

-oext=ext,    --output-file-extension=ext
    Change the extension of the output file to be ext instead of the default tdy (or html in case the --html option is used). See "Specifying File Extensions".

-opath=path,    --output-path=path
    When perltidy creates a filename for an output file, by default it merely appends an extension to the path and basename of the input file. This parameter causes the path to be changed to path instead.

    The path should end in a valid path separator character, but perltidy will try to add one if it is missing.

    For example

     perltidy somefile.pl -opath=/tmp/

    will produce /tmp/somefile.pl.tdy. Otherwise, somefile.pl.tdy will appear in whatever directory contains somefile.pl.

    If the path contains spaces, it should be placed in quotes.

    This parameter will be ignored if output is being directed to standard output, or if it is being specified explicitly with the --outfile=s parameter.

-b,    --backup-and-modify-in-place
    Modify the input file or files in-place and save the original with the extension .bak. Any existing .bak file will be deleted. See next item for changing the default backup extension, and for eliminating the backup file altogether.

    Please Note: Writing back to the input file increases the risk of data loss or corruption in the event of a software or hardware malfunction. Before using the -b parameter please be sure to have backups and verify that it works correctly in your environment and operating system.

    A -b flag will be ignored if input is from standard input or goes to standard output, or if a specific output filename is specified with --outfile=filename, or if the -html flag is set.

    In particular, if you want to use both the -b flag and the --perl-best-practices (-pbp) flag, then you must put a --nostandard-output (-nst) flag after the -pbp flag because it contains a --standard-output flag as one of its components, which means that output will go to the standard output stream.

-bext=ext,    --backup-file-extension=ext
    This parameter serves two purposes: (1) to change the extension of the backup file to be something other than the default .bak, and (2) to indicate that no backup file should be saved.

    To change the default extension to something other than .bak see "Specifying File Extensions".

    A backup file of the source is always written, but you can request that it be deleted at the end of processing if there were no errors. This is risky unless the source code is being maintained with a source code control system.

    To indicate that the backup should be deleted include one forward slash, /, in the extension. If any text remains after the slash is removed it will be used to define the backup file extension (which is always created and only deleted if there were no errors).

    Here are some examples:

      Parameter          Extension      Backup File Treatment
      -bext=bak         .bak            Keep (same as default behavior)
      -bext='/'         .bak            Delete if no errors
      -bext='/backup'   .backup         Delete if no errors
      -bext='original/' .original       Delete if no errors

-bm=s,  --backup-method=s
    This parameter should not normally be used but is available in the event that problems arise as a transition is made from an older implementation of the backup logic to a newer implementation. The newer implementation is the default and is specified with -bm='copy'. The older implementation is specified with -bm='move'. The difference is that the older implementation made the backup by moving the input file to the backup file, and the newer implementation makes the backup by copying the input file. The newer implementation preserves the file system inode value. This may avoid problems with other software running simultaneously. This change was made as part of issue git #103 at github.

-w,    --warning-output
    Setting -w causes any non-critical warning messages to be reported as errors. These include messages about possible pod problems, possibly bad starting indentation level, and cautions about indirect object usage. The default, -nw or --nowarning-output, is not to include these warnings.

-q,    --quiet
    Deactivate error messages (for running under an editor).

    For example, if you use a vi-style editor, such as vim, you may execute perltidy as a filter from within the editor using something like

     :n1,n2!perltidy -q

    where "n1,n2" represents the selected text. Without the -q flag, any error message may mess up your screen, so be prepared to use your "undo" key.

-log,    --logfile
    Save the .LOG file, which has many useful diagnostics. Perltidy always creates a .LOG file, but by default it is deleted unless a program bug is suspected. Setting the -log flag forces the log file to be saved.

-g=n, --logfile-gap=n
    Set maximum interval between input code lines in the logfile. This purpose of this flag is to assist in debugging nesting errors. The value of "n" is optional. If you set the flag -g without the value of "n", it will be taken to be 1, meaning that every line will be written to the log file. This can be helpful if you are looking for a brace, paren, or bracket nesting error.

    Setting -g also causes the logfile to be saved, so it is not necessary to also include -log.

    If no -g flag is given, a value of 50 will be used, meaning that at least every 50th line will be recorded in the logfile. This helps prevent excessively long log files.

    Setting a negative value of "n" is the same as not setting -g at all.

-npro  --noprofile
    Ignore any .perltidyrc command file. Normally, perltidy looks first in your current directory for a .perltidyrc file of parameters. (The format is described below). If it finds one, it applies those options to the initial default values, and then it applies any that have been defined on the command line. If no .perltidyrc file is found, it looks for one in your home directory.

    If you set the -npro flag, perltidy will not look for this file.

-pro=filename or  --profile=filename
    To simplify testing and switching .perltidyrc files, this command may be used to specify a configuration file which will override the default name of .perltidyrc. There must not be a space on either side of the '=' sign. For example, the line

       perltidy -pro=testcfg

    would cause file testcfg to be used instead of the default .perltidyrc.

    A pathname begins with three dots, e.g. ".../.perltidyrc", indicates that the file should be searched for starting in the current directory and working upwards. This makes it easier to have multiple projects each with their own .perltidyrc in their root directories.

-opt,   --show-options
    Write a list of all options used to the .LOG file. Please see --dump-options for a simpler way to do this.

-f,   --force-read-binary
    Force perltidy to process binary files. To avoid producing excessive error messages, perltidy skips files identified by the system as non-text. However, valid perl scripts containing binary data may sometimes be identified as non-text, and this flag forces perltidy to process them.

-ast,   --assert-tidy
    This flag asserts that the input and output code streams are identical, or in other words that the input code is already 'tidy' according to the formatting parameters. If this is not the case, an error message noting this is produced. This error message will cause the process to return a non-zero exit code. The test for this is made by comparing an MD5 hash value for the input and output code streams. This flag has no other effect on the functioning of perltidy. This might be useful for certain code maintenance operations. Note: you will not see this message if you have error messages turned off with the -quiet flag.

-asu,   --assert-untidy
    This flag asserts that the input and output code streams are different, or in other words that the input code is 'untidy' according to the formatting parameters. If this is not the case, an error message noting this is produced. This flag has no other effect on the functioning of perltidy.

-tos=n,   --timeout-in-seconds=n
    When the standard input supplies the input stream, and the input has not been received within n seconds, perltidy will end with a timeout message. The intention is to catch a situation where perltidy is accidentally invoked without a file to process and therefore waits for input from the system standard input (stdin), which never arrives. The default is n=5 seconds. This check can be turned off with n=0.

FORMATTING OPTIONS

  Basic Options

-fmt=s, --format=s
    If --format=tidy (the default) then perltidy will reformat the input file, and if --format=html then perltidy will produce html output.

    For convenience, the abbreviation --tidy is equivalent to --format=tidy, and -html is equivalent to --format=html.

--notidy
    This flag disables all formatting and causes the input to be copied unchanged to the output except for possible changes in line ending characters and any pre- and post-filters. This can be useful in conjunction with a hierarchical set of .perltidyrc files to avoid unwanted code tidying. See also "Skipping Selected Sections of Code" for a way to avoid tidying specific sections of code.

-i=n,  --indent-columns=n
    Use n columns per indentation level (default n=4).

-l=n, --maximum-line-length=n
    The default maximum line length is n=80 characters. Perltidy will try to find line break points to keep lines below this length. However, long quotes and side comments may cause lines to exceed this length. And long lines may sometimes be broken at a length less than n characters because some of the line break decisions employ small tolerances to prevent formatting instabilities.

    Setting -l=0 is equivalent to setting -l=(a very large number). But this is not recommended because, for example, a very long list will be formatted in a single long line.

-vmll, --variable-maximum-line-length
    A problem arises using a fixed maximum line length with very deeply nested code and data structures because eventually the amount of leading whitespace used for indicating indentation takes up most or all of the available line width, leaving little or no space for the actual code or data. One solution is to use a very long line length. Another solution is to use the -vmll flag, which basically tells perltidy to ignore leading whitespace when measuring the line length.

    To be precise, when the -vmll parameter is set, the maximum line length of a line of code will be M+L*I, where

          M is the value of --maximum-line-length=M (-l=M), default 80,
          I is the value of --indent-columns=I (-i=I), default 4,
          L is the indentation level of the line of code

    When this flag is set, the choice of breakpoints for a block of code should be essentially independent of its nesting depth. However, the absolute line lengths, including leading whitespace, can still be arbitrarily large. This problem can be avoided by including the next parameter.

    The default is not to do this (-nvmll).

-wc=n, --whitespace-cycle=n
    This flag also addresses problems with very deeply nested code and data structures. When the nesting depth exceeds the value n the leading whitespace will be reduced and start at a depth of 1 again. The result is that blocks of code will shift back to the left rather than moving arbitrarily far to the right. This occurs cyclically to any depth.

    For example if one level of indentation equals 4 spaces (-i=4, the default), and one uses -wc=15, then if the leading whitespace on a line exceeds about 4*15=60 spaces it will be reduced back to 4*1=4 spaces and continue increasing from there. If the whitespace never exceeds this limit the formatting remains unchanged.

    The combination of --variable-maximum-line-length and --whitespace-cycle=n provides a solution to the problem of displaying arbitrarily deep data structures and code in a finite window, although --whitespace-cycle=n may of course be used without --variable-maximum-line-length.

    The default is not to use this, which can also be indicated using -wc=0.

Tabs
    Using tab characters will almost certainly lead to future portability and maintenance problems, so the default and recommendation is not to use them. For those who prefer tabs, however, there are two different options.

    Except for possibly introducing tab indentation characters, as outlined below, perltidy does not introduce any tab characters into your file, and it removes any tabs from the code (unless requested not to do so with --freeze-whitespace). If you have any tabs in your comments, quotes, or here-documents, they will remain.

    -et=n,   --entab-leading-whitespace
        This flag causes each n leading space characters produced by the formatting process to be replaced by one tab character. The formatting process itself works with space characters. The -et=n parameter is applied as a last step, after formatting is complete, to convert leading spaces into tabs. Before starting to use tabs, it is essential to first get the indentation controls set as desired without tabs, particularly the two parameters --indent-columns=n (or -i=n) and --continuation-indentation=n (or -ci=n).

        The value of the integer n can be any value but can be coordinated with the number of spaces used for indentation. For example, -et=4 -ci=4 -i=4 will produce one tab for each indentation level and one for each continuation indentation level. You may want to coordinate the value of n with what your display software assumes for the spacing of a tab.

        The default is not to use this, which can also be indicated using -et=0.

    -t,   --tabs
        This flag causes one leading tab character to be inserted for each level of indentation. Certain other features are incompatible with this option, and if these options are also given, then a warning message will be issued and this flag will be unset. One example is the --line-up-parentheses option. This flag is retained for backwards compatibility, but if you use tabs, the --entab-leading-whitespace=n flag is recommended. If both --tabs and --entab-leading-whitespace=n are set, then --entab-leading-whitespace=n is used.

    -dt=n,   --default-tabsize=n
        If the first line of code passed to perltidy contains leading tabs but no tab scheme is specified for the output stream then perltidy must guess how many spaces correspond to each leading tab. This number of spaces n corresponding to each leading tab of the input stream may be specified with -dt=n. The default is n=8.

        This flag has no effect if a tab scheme is specified for the output stream, because then the input stream is assumed to use the same tab scheme and indentation spaces as for the output stream (any other assumption would lead to unstable editing).

-io,   --indent-only
    This flag is used to deactivate all whitespace and line break changes within non-blank lines of code. When it is in effect, the only change to the script will be to the indentation and to the number of blank lines. And any flags controlling whitespace and newlines will be ignored. You might want to use this if you are perfectly happy with your whitespace and line breaks, and merely want perltidy to handle the indentation. (This also speeds up perltidy by well over a factor of two, so it might be useful when perltidy is merely being used to help find a brace error in a large script).

    Setting this flag is equivalent to setting --freeze-newlines and --freeze-whitespace.

    If you also want to keep your existing blank lines exactly as they are, you can add --freeze-blank-lines.

    With this option perltidy is still free to modify the indenting (and outdenting) of code and comments as it normally would. If you also want to prevent long comment lines from being outdented, you can add either --nooutdent-long-lines (-noll) or --maximum-line-length=0 (l=0).

    Setting this flag will prevent perltidy from doing any special operations on closing side comments. You may still delete all side comments however when this flag is in effect.

-enc=s,  --character-encoding=s
    This flag indicates if the input data stream uses a character encoding. Perltidy does not look for the encoding directives in the source stream, such as use utf8, and instead relies on this flag to determine the encoding. (This is because perltidy often works on snippets of code rather than complete files, so it cannot rely on use utf8 directives). Consequently perltidy is likely to encounter problems formatting a file which is only partially encoded.

    The possible values for s are:

     -enc=none if no encoding is used, or
     -enc=utf8 for encoding in utf8
     -enc=guess if perltidy should guess between these two possibilities.

    The value none causes the stream to be processed without special encoding assumptions. This is appropriate for files which are written in single-byte character encodings such as latin-1.

    The value utf8 causes the stream to be read and written as UTF-8. If the input stream cannot be decoded with this encoding then processing is not done.

    The value guess tells perltidy to guess between either utf8 encoding or no encoding (meaning one character per byte). The guess option uses the Encode::Guess module which has been found to be reliable at detecting if a file is encoded in utf8 or not.

    The current default is guess.

    The abbreviations -utf8 or -UTF8 are equivalent to -enc=utf8, and the abbreviation -guess is equivalent to -enc=guess. So to process a file named file.pl which is encoded in UTF-8 you can use:

       perltidy -utf8 file.pl

    or

       perltidy -guess file.pl

    or simply

       perltidy file.pl

    since -guess is the default.

    To process files with an encoding other than UTF-8, it would be necessary to write a short program which calls the Perl::Tidy module with some pre- and post-processing to handle decoding and encoding.

-eos=s,   --encode-output-strings=s
    This flag was added to resolve an issue involving the interface between Perl::Tidy and calling programs, and in particular Code::TidyAll (tidyall).

    If you only run the perltidy binary this flag has no effect. If you run a program which calls the Perl::Tidy module and receives a string in return, then the meaning of the flag is as follows:

    •   The setting -eos means Perl::Tidy should encode any string which it decodes. This is the default because it makes perltidy behave well as a filter, and is the correct setting for most programs.

    •   The setting -neos means that a string should remain decoded if it was decoded by Perl::Tidy. This is only appropriate if the calling program will handle any needed encoding before outputting the string.

    The default was changed from -neos to -eos in versions after 20220217. If this change causes a program to start running incorrectly on encoded files, an emergency fix might be to set -neos. Additional information can be found in the man pages for the Perl::Tidy module and also in <https://github.com/perltidy/perltidy/blob/master/docs/eos_flag.md>

-gcs,  --use-unicode-gcstring
    This flag controls whether or not perltidy may use module Unicode::GCString to obtain accurate display widths of wide characters. The default is --nouse-unicode-gcstring.

    If this flag is set, and text is encoded, perltidy will look for the module Unicode::GCString and, if found, will use it to obtain character display widths. This can improve displayed vertical alignment for files with wide characters. It is a nice feature but it is off by default to avoid conflicting formatting when there are multiple developers. Perltidy installation does not require Unicode::GCString, so users wanting to use this feature need set this flag and also to install Unicode::GCString separately.

    If this flag is set and perltidy does not find module Unicode::GCString, a warning message will be produced and processing will continue but without the potential benefit provided by the module.

    Also note that actual vertical alignment depends upon the fonts used by the text display software, so vertical alignment may not be optimal even when Unicode::GCString is used.

-ole=s,  --output-line-ending=s
    where s="win", "dos", "unix", or "mac". This flag tells perltidy to output line endings for a specific system. Normally, perltidy writes files with the line separator character of the host system. The "win" and "dos" flags have an identical result.

-ple,  --preserve-line-endings
    This flag tells perltidy to write its output files with the same line endings as the input file, if possible. It should work for dos, unix, and mac line endings. It will only work if perltidy input comes from a filename (rather than stdin, for example). If perltidy has trouble determining the input file line ending, it will revert to the default behavior of using the line ending of the host system.

-atnl,  --add-terminal-newline
    This flag, which is enabled by default, allows perltidy to terminate the last line of the output stream with a newline character, regardless of whether or not the input stream was terminated with a newline character. If this flag is negated, with -natnl, then perltidy will add a terminal newline to the output stream only if the input stream is terminated with a newline.

    Negating this flag may be useful for manipulating one-line scripts intended for use on a command line.

-it=n,   --iterations=n
    This flag causes perltidy to do n complete iterations. The reason for this flag is that code formatting is an iterative process and in some cases the output from perltidy can be different if it is applied a second time. For most purposes the default of n=1 should be satisfactory. However n=2 can be useful when a major style change is being made, or when code is being beautified on check-in to a source code control system. It has been found to be extremely rare for the output to change after 2 iterations. If a value n is greater than 2 is input then a convergence test will be used to stop the iterations as soon as possible, almost always after 2 iterations. See the next item for a simplified iteration control.

    This flag has no effect when perltidy is used to generate html.

-conv,   --converge
    This flag is equivalent to -it=4 and is included to simplify iteration control. Perltidy will check for convergence and stop iterating as soon as possible. The default is -nconv (no convergence check). Using -conv will approximately double run time since typically one extra iteration is required to verify convergence. No extra iterations are required if no new line breaks are made, and two extra iterations are occasionally needed when reformatting complex code structures, such as deeply nested ternary statements.

  Code Indentation Control
The basic indentation model used by perltidy sets the indentation of a line equal to the sum of any number of primary indentation levels, each of which corresponds to the entry into a new container, plus one continuation level, which arises when a statement is broken across multiple lines. This is not the most general possible model, but it has been found to work well with most perl code while also allowing robust coding which avoids instabilities.

The number of spaces corresponding to these primary and secondary (continuation) levels can be independently controlled. The number of spaces for the primary indentation is --indent-columns=n, or -i=n, as described above. The number of spaces for the secondary indentation is described in the next section.

-ci=n, --continuation-indentation=n
    Continuation indentation is extra indentation spaces applied when a long line is broken. The default is n=2, illustrated here:

     my $level =   # -ci=2
       ( $max_index_to_go >= 0 ) ? $levels_to_go[0] : $last_output_level;

    The same example, with n=0, is a little harder to read:

     my $level =   # -ci=0
     ( $max_index_to_go >= 0 ) ? $levels_to_go[0] : $last_output_level;

    The value given to -ci is also used by some commands when a small space is required. Examples are commands for outdenting labels, --outdent-labels (-ola), and control keywords, --outdent-keywords (-okw).

    When default values are not used, it is recommended that either

    (1) the value n given with -ci=n be no more than about one-half of the number of spaces assigned to a full indentation level on the -i=n command, or

    (2) the flag --extended-continuation-indentation is used (see next section).

-xci, --extended-continuation-indentation
    This flag allows perltidy to use some improvements which have been made to its indentation model. One of the things it does is "extend" continuation indentation deeper into structures, hence the name. The improved indentation is particularly noticeable when the flags -ci=n and -i=n use the same value of n. There are no significant disadvantages to using this flag, but to avoid disturbing existing formatting the default is not to use it, -nxci.

    Please see the section "-pbp, --perl-best-practices" for an example of how this flag can improve the formatting of ternary statements. It can also improve indentation of some multiline qw lists as shown below.

            # perltidy
            foreach $color (
                qw(
                AntiqueWhite3 Bisque1 Bisque2 Bisque3 Bisque4
                SlateBlue3 RoyalBlue1 SteelBlue2 DeepSkyBlue3
                ),
                qw(
                LightBlue1 DarkSlateGray1 Aquamarine2 DarkSeaGreen2
                SeaGreen1 Yellow1 IndianRed1 IndianRed2 Tan1 Tan4
                )
              )

            # perltidy -xci
            foreach $color (
                qw(
                    AntiqueWhite3 Bisque1 Bisque2 Bisque3 Bisque4
                    SlateBlue3 RoyalBlue1 SteelBlue2 DeepSkyBlue3
                ),
                qw(
                    LightBlue1 DarkSlateGray1 Aquamarine2 DarkSeaGreen2
                    SeaGreen1 Yellow1 IndianRed1 IndianRed2 Tan1 Tan4
                )
              )

-mci, --minimize-continuation-indentation
    This flag allows perltidy to remove continuation indentation in some special cases where it is not really unnecessary. For a simple example, the default formatting for the following snippet is:

        # perltidy -nmci
        $self->blurt( "Error: No INPUT for type '$type', typekind '"
              . $type->xstype
              . "' found" );

    The second and third lines are one level deep in a container, and are also statement continuations, so they get indented by the sum of the full indentation -i value and the continuation indentation -ci value. If this flag is set, the indentation is reduced by -ci spaces, giving

        # perltidy -mci
        $self->blurt( "Error: No INPUT for type '$type', typekind '"
            . $type->xstype
            . "' found" );

    This flag is off by default.

-sil=n --starting-indentation-level=n
    By default, perltidy examines the input file and tries to determine the starting indentation level. While it is often zero, it may not be zero for a code snippet being sent from an editing session.

    To guess the starting indentation level perltidy simply assumes that indentation scheme used to create the code snippet is the same as is being used for the current perltidy process. This is the only sensible guess that can be made. It should be correct if this is true, but otherwise it probably won't. For example, if the input script was written with -i=2 and the current perltidy flags have -i=4, the wrong initial indentation will be guessed for a code snippet which has non-zero initial indentation. Likewise, if an entabbing scheme is used in the input script and not in the current process then the guessed indentation will be wrong.

    If the default method does not work correctly, or you want to change the starting level, use -sil=n, to force the starting level to be n.

List indentation using --line-up-parentheses, -lp or --extended--line-up-parentheses , -xlp
    These flags provide an alternative indentation method for list data. The original flag for this is -lp, but it has some limitations (explained below) which are avoided with the newer -xlp flag. So -xlp is probably the better choice for new work, but the -lp flag is retained to minimize changes to existing formatting. If you enter both -lp and -xlp, then -xlp will be used.

    In the default indentation method perltidy indents lists with 4 spaces, or whatever value is specified with -i=n. Here is a small list formatted in this way:

        # perltidy (default)
        @month_of_year = (
            'Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun',
            'Jul', 'Aug', 'Sep', 'Oct', 'Nov', 'Dec'
        );

    The -lp or -xlp flags add extra indentation to cause the data to begin past the opening parentheses of a sub call or list, or opening square bracket of an anonymous array, or opening curly brace of an anonymous hash. With this option, the above list would become:

        # perltidy -lp or -xlp
        @month_of_year = (
                           'Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun',
                           'Jul', 'Aug', 'Sep', 'Oct', 'Nov', 'Dec'
        );

    If the available line length (see -l=n ) does not permit this much space, perltidy will use less. For alternate placement of the closing paren, see the next section.

    These flags have no effect on code BLOCKS, such as if/then/else blocks, which always use whatever is specified with -i=n.

    Some limitations on these flags are:

    •   A limitation on -lp, but not -xlp, occurs in situations where perltidy does not have complete freedom to choose line breaks. Then it may temporarily revert to its default indentation method. This can occur for example if there are blank lines, block comments, multiline quotes, or side comments between the opening and closing parens, braces, or brackets. It will also occur if a multiline anonymous sub occurs within a container since that will impose specific line breaks (such as line breaks after statements).

    •   For both the -lp and -xlp flags, any parameter which significantly restricts the ability of perltidy to choose newlines will conflict with these flags and will cause them to be deactivated. These include --indent-only, --freeze-newlines, --noadd-newlines, and --nodelete-old-newlines.

    •   The -lp and -xlp options may not be used together with the -t tabs option. They may, however, be used with the -et=n tab method

    There are some potential disadvantages of this indentation method compared to the default method that should be noted:

    •   The available line length can quickly be used up if variable names are long. This can cause deeply nested code to quickly reach the line length limit, and become badly formatted, much sooner than would occur with the default indentation method.

    •   Since the indentation depends on the lengths of variable names, small changes in variable names can cause changes in indentation over many lines in a file. This means that minor name changes can produce significant file differences. This can be annoying and does not occur with the default indentation method.

    •   Sometimes new releases of Perl::Tidy can cause changes in the indentation of lists, especially for large lists formatted with the -xlp style. This is because small changes occasionally need to be made in the logic which checks line lengths in order to fix formatting issues.

    Some things that can be done to minimize these problems are:

    •   Increase --maximum-line-length=n above the default n=80 characters if necessary.

    •   If you use -xlp then long side comments can limit the indentation over multiple lines. Consider adding the flag --ignore-side-comment-lengths to prevent this, or minimizing the use of side comments.

    •   Apply this style in a limited way. By default, it applies to all list containers (not just lists in parentheses). The next section describes how to limit this style to, for example, just function calls. The default indentation method will be applied elsewhere.

-lpil=s, --line-up-parentheses-inclusion-list and -lpxl=s,  --line-up-parentheses-exclusion-list
    The following discussion is written for -lp but applies equally to the newer -xlp version. By default, the -lp flag applies to as many containers as possible. The set of containers to which the -lp style applies can be reduced by either one of these two flags:

    Use --line-up-parentheses-inclusion-list=s (-lpil=s) to specify the containers to which -lp applies, or

    use --line-up-parentheses-exclusion-list=s (-lpxl=s) to specify the containers to which -lp does NOT apply.

    Only one of these two flags may be used. Both flags can achieve the same result, but the -lpil=s flag is much easier to describe and use and is recommended. The -lpxl=s flag was the original implementation and is only retained for backwards compatibility.

    This list s for these parameters is a string with space-separated items. Each item consists of up to three pieces of information in this order: (1) an optional letter code (2) a required container type, and (3) an optional numeric code.

    The only required piece of information is a container type, which is one of '(', '[', or '{'. For example the string

      -lpil='('

    means use -lp formatting only on lists within parentheses, not lists in square-brackets or braces. The same thing could alternatively be specified with

      -lpxl = '[ {'

    which says to exclude lists within square-brackets and braces. So what remains is lists within parentheses.

    A second optional item of information which can be given for parentheses is an alphanumeric letter which is used to limit the selection further depending on the type of token immediately before the paren. The possible letters are currently 'k', 'K', 'f', 'F', 'w', and 'W', with these meanings for matching whatever precedes an opening paren (see "Specifying Paren Types"):

     'k' matches if the previous nonblank token is a perl keyword
         (such as 'if', 'while'),
     'K' matches if 'k' does not: previous token is not a keyword
     'f' matches if previous token is a function (not a keyword)
     'F' matches if 'f' does not.
     'w' matches if either 'k' or 'f' match.
     'W' matches if 'w' does not.

    For example:

      -lpil = 'f('

    means only apply -lp to function calls, and

      -lpil = 'w('

    means only apply -lp to parenthesized lists which follow a function or a keyword.

    This last example could alternatively be written using the -lpxl=s flag as

      -lpxl = '[ { W('

    which says exclude -lp for lists within square-brackets, braces, and parens NOT preceded by a keyword or function. Clearly, the -lpil=s method is easier to understand.

    An optional numeric code may follow any of the container types to further refine the selection based on container contents. The numeric codes are:

      '0' or blank: no restriction is placed on container contents
      '1' the container contents must be a simple list without sublists
      '2' the container contents must be a simple list without sublists,
          without code blocks, and without ternary operators

    For example,

      -lpil = 'f(2'

    means only apply -lp to function calls with simple lists (not containing any sublists, code blocks or ternary expressions).

-cti=n, --closing-token-indentation
    The -cti=n flag controls the indentation of a line beginning with a ")", "]", or a non-block "}". Such a line receives:

     -cti = 0 no extra indentation (default)
     -cti = 1 extra indentation such that the closing token
            aligns with its opening token.
     -cti = 2 one extra indentation level if the line looks like:
            );  or  ];  or  };
     -cti = 3 one extra indentation level always

    The flags -cti=1 and -cti=2 work well with the --line-up-parentheses (-lp) flag (previous section).

        # perltidy -lp -cti=1
        @month_of_year = (
                           'Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun',
                           'Jul', 'Aug', 'Sep', 'Oct', 'Nov', 'Dec'
                         );

        # perltidy -lp -cti=2
        @month_of_year = (
                           'Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun',
                           'Jul', 'Aug', 'Sep', 'Oct', 'Nov', 'Dec'
                           );

    These flags are merely hints to the formatter and they may not always be followed. In particular, if -lp is not being used, the indentation for cti=1 is constrained to be no more than one indentation level.

    If desired, this control can be applied independently to each of the closing container token types. In fact, -cti=n is merely an abbreviation for -cpi=n -csbi=n -cbi=n, where: -cpi or --closing-paren-indentation controls )'s, -csbi or --closing-square-bracket-indentation controls ]'s, -cbi or --closing-brace-indentation controls non-block }'s.

-icp, --indent-closing-paren
    The -icp flag is equivalent to -cti=2, described in the previous section. The -nicp flag is equivalent -cti=0. They are included for backwards compatibility.

-icb, --indent-closing-brace
    The -icb option gives one extra level of indentation to a brace which terminates a code block . For example,

            if ($task) {
                yyy();
                }    # -icb
            else {
                zzz();
                }

    The default is not to do this, indicated by -nicb.

-ils, --indent-leading-semicolon
    A line which begins with a leading semicolon will, by default, have the extra number of indentation spaces defined by --continuation-indentation=n. This extra indentation can be removed by setting -nils.

        # default
        $z = sqrt( $x**2 + $y**2 )

          ;    # <-- indented by ci spaces

        # -nils
        $z = sqrt( $x**2 + $y**2 )

        ;    # <-- not indented by ci spaces

    Note that leading semicolons do not normally occur unless requested with --break-at-old-semicolon-breakpoints or forced, for example by a blank line as in this example.

-nib, --non-indenting-braces
    Normally, lines of code contained within a pair of block braces receive one additional level of indentation. This flag, which is enabled by default, causes perltidy to look for opening block braces which are followed by a special side comment. This special side comment is #<<< by default. If found, the code between this opening brace and its corresponding closing brace will not be given the normal extra indentation level. For example:

            { #<<<   a closure to contain lexical vars

            my $var;  # this line does not get one level of indentation
            ...

            }

            # this line does not 'see' $var;

    This can be useful, for example, when combining code from different files. Different sections of code can be placed within braces to keep their lexical variables from being visible to the end of the file. To keep the new braces from causing all of their contained code to be indented if you run perltidy, and possibly introducing new line breaks in long lines, you can mark the opening braces with this special side comment.

    Only the opening brace needs to be marked, since perltidy knows where the closing brace is. Braces contained within marked braces may also be marked as non-indenting.

    If your code happens to have some opening braces followed by '#<<<', and you don't want this behavior, you can use -nnib to deactivate it. To make it easy to remember, the default string is the same as the string for starting a format-skipping section. There is no confusion because in that case it is for a block comment rather than a side-comment.

    The special side comment can be changed with the next parameter.

-nibp=s, --non-indenting-brace-prefix=s
    The -nibp=string parameter may be used to change the marker for non-indenting braces. The default is equivalent to -nibp='#<<<'. The string that you enter must begin with a # and should be in quotes as necessary to get past the command shell of your system. This string is the leading text of a regex pattern that is constructed by prepending a '^' and appending a'\s', so you must also include backslashes for characters to be taken literally rather than as patterns.

    For example, to match the side comment '#++', the parameter would be

      -nibp='#\+\+'

-olq, --outdent-long-quotes
    When -olq is set, lines which is a quoted string longer than the value maximum-line-length will have their indentation removed to make them more readable. This is the default. To prevent such out-denting, use -nolq.

-oll, --outdent-long-lines
    This command is equivalent to the combination --outdent-long-quotes and --outdent-long-comments, and it is included for compatibility with previous versions of perltidy. The negation of this also works, -noll or --nooutdent-long-lines, and is equivalent to setting -nolq and -nolc.

Outdenting Labels: -ola,  --outdent-labels
    This command will cause labels to be outdented by the number of spaces defined by --continuation-indentation=n, if possible. This is the default. For example:

            my $i;
          LOOP: while ( $i = <FOTOS> ) {
                chomp($i);
                next unless $i;
                fixit($i);
            }

    Use -nola to prevent this. To control line breaks after labels see "-bal=n, --break-after-labels=n".

Outdenting Keywords
    -okw,  --outdent-keywords
        The command -okw will cause certain leading control keywords to be outdented by the number of spaces defined by --continuation-indentation=nspaces, if possible. By default, these keywords are "redo", "next", "last", "goto", and "return". The intention is to make these control keywords easier to see. To change this list of keywords being outdented, see the next section.

        For example, using "perltidy -okw" on the previous example gives:

                my $i;
              LOOP: while ( $i = <FOTOS> ) {
                    chomp($i);
                  next unless $i;
                    fixit($i);
                }

        Notice that the keyword next has been outdented. The default is not to do this.

    Specifying Outdented Keywords: -okwl=string,  --outdent-keyword-list=string
        This command can be used to change the keywords which are outdented with the -okw command. The parameter string is a required list of perl keywords, which should be placed in quotes if there are more than one. By itself, it does not cause any outdenting to occur, so the -okw command is still required.

        For example, the commands "-okwl="next last redo goto" -okw" will cause those four keywords to be outdented.

  Whitespace Control
Whitespace refers to the blank space between variables, operators, and other code tokens.

-fws,  --freeze-whitespace
    This flag causes your original whitespace to remain unchanged, and causes the rest of the whitespace commands in this section, the Code Indentation section, and the Comment Control section to be ignored.

Tightness of curly braces, parentheses, and square brackets
    Here the term "tightness" will mean the closeness with which pairs of enclosing tokens, such as parentheses, contain the quantities within. A numerical value of 0, 1, or 2 defines the tightness, with 0 being least tight and 2 being most tight. Spaces within containers are always symmetric, so if there is a space after a "(" then there will be a space before the corresponding ")".

    The -pt=n or --paren-tightness=n parameter controls the space within parens. The example below shows the effect of the three possible values, 0, 1, and 2:

     if ( ( my $len_tab = length( $tabstr ) ) > 0 ) {  # -pt=0
     if ( ( my $len_tab = length($tabstr) ) > 0 ) {    # -pt=1 (default)
     if ((my $len_tab = length($tabstr)) > 0) {        # -pt=2

    When n is 0, there is always a space to the right of a '(' and to the left of a ')'. For n=2 there is never a space. For n=1, the default, there is a space unless the quantity within the parens is a single token, such as an identifier or quoted string.

    Likewise, the parameter -sbt=n or --square-bracket-tightness=n controls the space within square brackets, as illustrated below.

     $width = $col[ $j + $k ] - $col[ $j ];  # -sbt=0
     $width = $col[ $j + $k ] - $col[$j];    # -sbt=1 (default)
     $width = $col[$j + $k] - $col[$j];      # -sbt=2

    Curly braces which do not contain code blocks are controlled by the parameter -bt=n or --brace-tightness=n.

     $obj->{ $parsed_sql->{ 'table' }[0] };    # -bt=0
     $obj->{ $parsed_sql->{'table'}[0] };      # -bt=1 (default)
     $obj->{$parsed_sql->{'table'}[0]};        # -bt=2

    And finally, curly braces which contain blocks of code are controlled by the parameter -bbt=n or --block-brace-tightness=n as illustrated in the example below (-bbt=0 is the default).

     %bf = map { $_ => -M $_ } grep { /\.deb$/ } dirents '.'; # -bbt=0
     %bf = map { $_ => -M $_ } grep {/\.deb$/} dirents '.';   # -bbt=1
     %bf = map {$_ => -M $_} grep {/\.deb$/} dirents '.';     # -bbt=2

    To simplify input in the case that all of the tightness flags have the same value n, the parameter -act=n or --all-containers-tightness=n is an abbreviation for the combination -pt=n -sbt=n -bt=n -bbt=n.

-mutt=s,   --multiple-token-tightness=s
    To review, the tightness controls described in the previous section have three possible integer values: 0, 1, and 2, where n=0 always adds a space, and n=2 never adds a space.

    The default value n=1 adds space only if the container holds multiple tokens. Some perltidy tokens may be rather long, and it can be preferable to space some of them as if they were multiple tokens. This can be done with this parameter.

    For example, in the following expression the "qw" list is a single token and therefore there the default formatting does not put spaces within the square brackets:

        my $rlist = [qw(alpha beta gamma)];

    This can be changed with

        # perltidy -mutt='qw'
        my $rlist = [ qw(alpha beta gamma) ];

    This tells perltidy to space a "qw"list as if it were multiple tokens when the default tightness is used.

    The parameter s may contain any of the following perl operators:

        qw q qq qx qr s y tr m

    Other possible specifications are

        q*   - all of the above operators
        Q    - all of the above plus any quoted text
        h    - a here-doc target, such as '<<EOT'
        <<>> - the double-diamond operator

    A symbol may be negated by preceding it with a carat ^ symbol. The double-diamond operator is always included unless negated in this way.

-xbt,   --extended-block-tightness
    There are two controls for spacing within curly braces, namely --block-brace-tightness=n for code block braces and --brace-tightness=n for all other braces.

    There is a little fuzziness in this division of brace types though because the curly braces considered by perltidy to contain code blocks for formatting purposes, such as highlighting code structure, exclude some of the small code blocks used by Perl mainly for isolating terms. These include curly braces following a keyword where an indirect object might occur, or curly braces following a type symbol. For example, perltidy does not mark the following braces as code block braces:

        print {*STDERR} $message;
        return ${$foo};

    Consequently, the spacing within these small braced containers by default follows the flag --brace-tightness=n rather than --block-brace-tightness=n, as one might expect.

    If desired, small blocks such as these can be made to instead follow the spacing defined by the --block-brace-tightness=n flag by setting --extended-block-tightness. The specific types of small blocks to which this parameter applies is controlled by a companion control parameter, described in the next section.

    Note that if the two flags --block-brace-tightness=n and --brace-tightness=n have the same value n then there would be no reason to set this flag.

-xbtl=s,   --extended-block-tightness-list=s
    The previous parameter --extended-block-tightness (-xbt) can be made to apply to curly braces preceded by any of the keywords

        print printf exec system say

    and/or the special symbols

        $ @ % & * $#

    The parameter string s may contain a selection of these keywords and symbols to indicate the brace types to which --extended-block-tightness applies. For convenience, all of the keywords can be selected with 'k', and all of the special symbols can be selected with 't'. The default is equivalent to -xbtl='k', which selects all of the keywords.

    Examples:

      -xbtl='k'          # selects just the keywords [DEFAULT]
      -xbtl="t"          # selects just the special type symbols
      -xbtl="k t"        # selects all keywords and symbols, or simply
      -xbtl="kt"         # selects all keywords and symbols
      -xbtl="print say"  # selects just keywords B<print> and B<say>:

    Here are some formatting examples using the default values of --brace-tightness=n and --block-brace-tightness=n. Note that in these examples $ref is in block braces but $key is not.

        # default formatting
        print {*STDERR} $message;
        my $val = ${$ref}{$key};

        # perltidy -xbt           or
        # perltidy -xbt -xbtl=k
        print { *STDERR } $message;
        my $val = ${$ref}{$key};

        # perltidy -xbt -xbtl=t
        print {*STDERR} $message;
        my $val = ${ $ref }{$key};

        # perltidy -xbt -xbtl=kt
        print { *STDERR } $message;
        my $val = ${ $ref }{$key};

    Finally, note that this parameter merely changes the way that the parameter --extended-block-tightness works. It has no effect unless --extended-block-tightness is actually set.

-tso,   --tight-secret-operators
    The flag -tso causes certain perl token sequences (secret operators) which might be considered to be a single operator to be formatted "tightly" (without spaces). The operators currently modified by this flag are:

         0+  +0  ()x!! ~~<>  ,=>   =( )=

    For example the sequence 0 +, which converts a string to a number, would be formatted without a space: 0+ when the -tso flag is set. This flag is off by default.

-sts,   --space-terminal-semicolon
    Some programmers prefer a space before all terminal semicolons. The default is for no such space, and is indicated with -nsts or --nospace-terminal-semicolon.

            $i = 1 ;     #  -sts
            $i = 1;      #  -nsts   (default)

-sfs,   --space-for-semicolon
    Semicolons within for loops may sometimes be hard to see, particularly when commas are also present. This option places spaces on both sides of these special semicolons, and is the default. Use -nsfs or --nospace-for-semicolon to deactivate it.

     for ( @a = @$ap, $u = shift @a ; @a ; $u = $v ) {  # -sfs (default)
     for ( @a = @$ap, $u = shift @a; @a; $u = $v ) {    # -nsfs

-asc,  --add-semicolons
    Setting -asc allows perltidy to add any missing optional semicolon at the end of a line which is followed by a closing curly brace on the next line. This is the default, and may be deactivated with -nasc or --noadd-semicolons.

-dsm,  --delete-semicolons
    Setting -dsm allows perltidy to delete extra semicolons which are simply empty statements. This is the default, and may be deactivated with -ndsm or --nodelete-semicolons. (Such semicolons are not deleted, however, if they would promote a side comment to a block comment).

-aws,  --add-whitespace
    Setting this option allows perltidy to add certain whitespace to improve code readability. This is the default. If you do not want any whitespace added, but are willing to have some whitespace deleted, use -naws. (Use --freeze-whitespace (-fws) to leave whitespace completely unchanged).

-dws,  --delete-old-whitespace
    Setting this option allows perltidy to remove optional whitespace between characters in the input file. The default is to not to do this (-nodelete-old-whitespace). This parameter has little effect by itself. But in combination with --noadd-whitespace it will cause most of the whitespace in a file to be removed.

Detailed whitespace controls around tokens
    For those who want more detailed control over the whitespace around tokens, there are four parameters which can directly modify the default whitespace rules built into perltidy for any token. They are:

    -wls=s or --want-left-space=s,

    -nwls=s or --nowant-left-space=s,

    -wrs=s or --want-right-space=s,

    -nwrs=s or --nowant-right-space=s.

    These parameters are each followed by a quoted string, s, containing a list of token types. No more than one of each of these parameters should be specified, because repeating a command-line parameter always overwrites the previous one before perltidy ever sees it.

    To illustrate how these are used, suppose it is desired that there be no space on either side of the token types = + - / *. The following two parameters would specify this desire:

      -nwls="= + - / *"    -nwrs="= + - / *"

    (Note that the token types are in quotes, and that they are separated by spaces). With these modified whitespace rules, the following line of math:

      $root = -$b + sqrt( $b * $b - 4. * $a * $c ) / ( 2. * $a );

    becomes this:

      $root=-$b+sqrt( $b*$b-4.*$a*$c )/( 2.*$a );

    These parameters should be considered to be hints to perltidy rather than fixed rules, because perltidy must try to resolve conflicts that arise between them and all of the other rules that it uses. One conflict that can arise is if, between two tokens, the left token wants a space and the right one doesn't. In this case, the token not wanting a space takes priority.

    It is necessary to have a list of all token types in order to create this type of input. Such a list can be obtained by the command --dump-token-types. Also try the -D flag on a short snippet of code and look at the .DEBUG file to see the tokenization.

    To illustrate, suppose we do not want a space after a colon which introduces a sub attribute. We need to know its type. It is not a colon because that is the type of a ternary operator. The output of --dump-token-types states that it is token type 'A'. To verify this, we can run "perltidy -D" on a short piece of code containing such a colon, such as

        sub foo : lvalue;

    This produces a .DEBUG file which contains

        1: sub foo : lvalue;
        1: SSSSSSSbAbwwwwww;

    The top line is the input, and the bottom line shows the token types. The 'A' beneath the colon verifies that it is type A.

    So to prevent a space on the right of this colon we can use

        # perltidy -nwrs='A'
        sub foo :lvalue;

    WARNING Be sure to put these tokens in quotes to avoid having them misinterpreted by your command shell.

Note1: Perltidy does always follow whitespace controls
    The various parameters controlling whitespace within a program are requests which perltidy follows as well as possible, but there are a number of situations where changing whitespace could change program behavior and is not done. Some of these are obvious; for example, we should not remove the space between the two plus symbols in '$x+ +$y' to avoid creating a '++' operator. Some are more subtle and involve the whitespace around bareword symbols and locations of possible filehandles. For example, consider the problem of formatting the following subroutine:

       sub print_div {
          my ($x,$y)=@_;
          print $x/$y;
       }

    Suppose the user requests that / signs have a space to the left but not to the right. Perltidy will refuse to do this, but if this were done the result would be

       sub print_div {
           my ($x,$y)=@_;
           print $x /$y;
       }

    If formatted in this way, the program will not run (at least with recent versions of perl) because the $x is taken to be a filehandle and / is assumed to start a quote. In a complex program, there might happen to be a / which terminates the multiline quote without a syntax error, allowing the program to run, but not as intended.

    Related issues arise with other binary operator symbols, such as + and -, and in older versions of perl there could be problems with ternary operators. So to avoid changing program behavior, perltidy has the simple rule that whitespace around possible filehandles is left unchanged. Likewise, whitespace around unknown barewords is left unchanged. The reason is that if the barewords are defined in other modules, or in code that has not even been written yet, perltidy will not have seen their prototypes and must treat them cautiously.

    In perltidy this is implemented in the tokenizer by marking token following a print keyword as a special type Z. When formatting is being done, whitespace following this token type is generally left unchanged as a precaution against changing program behavior. This is excessively conservative but simple and easy to implement. Keywords which are treated similarly to print include printf, sort, exec, system. Changes in spacing around parameters following these keywords may have to be made manually. For example, the space, or lack of space, after the parameter $foo in the following line will be unchanged in formatting.

       system($foo );
       system($foo);

    To find if a token is of type Z you can use perltidy -DEBUG. For the first line above the result is

       1: system($foo );
       1: kkkkkk{ZZZZb};

    which shows that system is type k (keyword) and $foo is type Z.

Note2: Perltidy's whitespace rules are not perfect
    Despite these precautions, it is still possible to introduce syntax errors with some asymmetric whitespace rules, particularly when call parameters are not placed in containing parens or braces. For example, the following two lines will be parsed by perl without a syntax error:

      # original programming, syntax ok
      my @newkeys = map $_-$nrecs+@data, @oldkeys;

      # perltidy default, syntax ok
      my @newkeys = map $_ - $nrecs + @data, @oldkeys;

    But the following will give a syntax error:

      # perltidy -nwrs='-'
      my @newkeys = map $_ -$nrecs + @data, @oldkeys;

    For another example, the following two lines will be parsed without syntax error:

      # original programming, syntax ok
      for my $severity ( reverse $LOWEST+1 .. $HIGHEST ) { ...  }

      # perltidy default, syntax ok
      for my $severity ( reverse $LOWEST + 1 .. $HIGHEST ) { ... }

    But the following will give a syntax error:

      # perltidy -nwrs='+', syntax error:
      for my $severity ( reverse $LOWEST +1 .. $HIGHEST ) { ... }

    To avoid subtle parsing problems like this, it is best to avoid spacing a binary operator asymmetrically with a space on the left but not on the right.

Space between specific keywords and opening paren
    When an opening paren follows a Perl keyword, no space is introduced after the keyword, unless it is (by default) one of these:

       my local our state and or xor cmp err eq ne if else elsif until
       unless while for foreach return switch case given when catch

    These defaults can be modified with two commands:

    -sak=s or --space-after-keyword=s adds keywords.

    -nsak=s or --nospace-after-keyword=s removes keywords.

    where s is a list of keywords (in quotes if necessary). For example,

      my ( $a, $b, $c ) = @_;    # default
      my( $a, $b, $c ) = @_;     # -nsak="my local our"

    The abbreviation -nsak='*' is equivalent to including all of the keywords in the above list.

    When both -nsak=s and -sak=s commands are included, the -nsak=s command is executed first. For example, to have space after only the keywords (my, local, our) you could use -nsak="*" -sak="my local our".

    To put a space after all keywords, see the next item.

Space between all keywords and opening parens
    When an opening paren follows a function or keyword, no space is introduced after the keyword except for the keywords noted in the previous item. To always put a space between a function or keyword and its opening paren, use the command:

    -skp or --space-keyword-paren

    You may also want to use the flag -sfp (next item) too.

Space between all function names and opening parens
    When an opening paren follows a function the default and recommended formatting is not to introduce a space. To cause a space to be introduced use:

    -sfp or --space-function-paren

      myfunc( $a, $b, $c );    # default
      myfunc ( $a, $b, $c );   # -sfp

    You will probably also want to use the flag -skp (previous item) too.

    The parameter is not recommended because spacing a function paren can make a program vulnerable to parsing problems by Perl. For example, the following two-line program will run as written but will have a syntax error if reformatted with -sfp:

      if ( -e filename() ) { print "I'm here\n"; }
      sub filename { return $0 }

    In this particular case the syntax error can be removed if the line order is reversed, so that Perl parses 'sub filename' first.

-fpva  or --function-paren-vertical-alignment
    A side-effect of using the -sfp flag is that the parens may become vertically aligned. For example,

        # perltidy -sfp
        myfun     ( $aaa, $b, $cc );
        mylongfun ( $a, $b, $c );

    This is the default behavior. To prevent this alignment use -nfpva:

        # perltidy -sfp -nfpva
        myfun ( $aaa, $b, $cc );
        mylongfun ( $a, $b, $c );

-spp=n  or --space-prototype-paren=n
    This flag can be used to control whether a function prototype is preceded by a space. For example, the following prototype does not have a space.

          sub usage();

    This integer n may have the value 0, 1, or 2 as follows:

        -spp=0 means no space before the paren
        -spp=1 means follow the example of the source code [DEFAULT]
        -spp=2 means always put a space before the paren

    The default is -spp=1, meaning that a space will be used if and only if there is one in the source code. Given the above line of code, the result of applying the different options would be:

            sub usage();    # n=0 [no space]
            sub usage();    # n=1 [default; follows input]
            sub usage ();   # n=2 [space]

-ssp=n  or --space-signature-paren=n
    This flag is analogous to the previous except that it applies to the space before the opening paren of a sub signature rather than a sub prototype.

    For example, consider the following line:

          sub circle( $xc, $yc, $rad )

    This space before the opening paren can be controlled with integer n which may have the value 0, 1, or 2 with these meanings:

        -ssp=0 means no space before the paren
        -ssp=1 means follow the example of the source code [DEFAULT]
        -ssp=2 means always put a space before the paren

    The default is -ssp=1, meaning that will be a space in the output if, and only if, there is one in the input. Given the above line of code, the result of applying the different options would be:

        sub circle( $xc, $yc, $rad )   # n=0 [no space]
        sub circle( $xc, $yc, $rad )   # n=1 [default; same as input]
        sub circle ( $xc, $yc, $rad )  # n=2 [space]

-kpit=n or --keyword-paren-inner-tightness=n
    The space inside of an opening paren, which itself follows a certain keyword, can be controlled by this parameter. The space on the inside of the corresponding closing paren will be treated in the same (balanced) manner. This parameter has precedence over any other paren spacing rules. The values of n are as follows:

       -kpit=0 means always put a space (not tight)
       -kpit=1 means ignore this parameter [default]
       -kpit=2 means never put a space (tight)

    To illustrate, the following snippet is shown formatted in three ways:

        if ( seek( DATA, 0, 0 ) ) { ... }    # perltidy (default)
        if (seek(DATA, 0, 0)) { ... }        # perltidy -pt=2
        if ( seek(DATA, 0, 0) ) { ... }      # perltidy -pt=2 -kpit=0

    In the second case the -pt=2 parameter makes all of the parens tight. In the third case the -kpit=0 flag causes the space within the 'if' parens to have a space, since 'if' is one of the keywords to which the -kpit flag applies by default. The remaining parens are still tight because of the -pt=2 parameter.

    The set of keywords to which this parameter applies are by default are:

       if elsif unless while until for foreach

    These can be changed with the parameter -kpitl=s described in the next section.

-kpitl=string or --keyword-paren-inner-tightness-list=string
    This command can be used to change the keywords to which the previous parameter, -kpit=n, applies. The parameter string is a required list either keywords or functions, which should be placed in quotes if there are more than one. By itself, this parameter does not cause any change in spacing, so the -kpit=n command is still required.

    For example, the commands "-kpitl="if else while" -kpit=2" will cause the just the spaces inside parens following 'if', 'else', and 'while' keywords to follow the tightness value indicated by the -kpit=2 flag.

-lop  or --logical-padding
    In the following example some extra space has been inserted on the second line between the two open parens. This extra space is called "logical padding" and is intended to help align similar things vertically in some logical or ternary expressions.

        # perltidy [default formatting]
        $same =
          (      ( $aP eq $bP )
              && ( $aS eq $bS )
              && ( $aT eq $bT )
              && ( $a->{'title'} eq $b->{'title'} )
              && ( $a->{'href'} eq $b->{'href'} ) );

    Note that this is considered to be a different operation from "vertical alignment" because space at just one line is being adjusted, whereas in "vertical alignment" the spaces at all lines are being adjusted. So it is sort of a local version of vertical alignment.

    Here is an example involving a ternary operator:

        # perltidy [default formatting]
        $bits =
            $top > 0xffff ? 32
          : $top > 0xff   ? 16
          : $top > 1      ? 8
          :                 1;

    This behavior is controlled with the flag --logical-padding, which is set 'on' by default. If it is not desired it can be turned off using --nological-padding or -nlop. The above two examples become, with -nlop:

        # perltidy -nlop
        $same =
          ( ( $aP eq $bP )
              && ( $aS eq $bS )
              && ( $aT eq $bT )
              && ( $a->{'title'} eq $b->{'title'} )
              && ( $a->{'href'} eq $b->{'href'} ) );

        # perltidy -nlop
        $bits =
          $top > 0xffff ? 32
          : $top > 0xff ? 16
          : $top > 1    ? 8
          :               1;

Trimming whitespace around "qw" quotes
    -tqw or --trim-qw provide the default behavior of trimming spaces around multiline "qw" quotes and indenting them appropriately.

    -ntqw or --notrim-qw cause leading and trailing whitespace around multiline "qw" quotes to be left unchanged. This option will not normally be necessary, but was added for testing purposes, because in some versions of perl, trimming "qw" quotes changes the syntax tree.

-sbq=n  or --space-backslash-quote=n
    lines like

           $str1=\"string1";
           $str2=\'string2';

    can confuse syntax highlighters unless a space is included between the backslash and the single or double quotation mark.

    this can be controlled with the value of n as follows:

        -sbq=0 means no space between the backslash and quote
        -sbq=1 means follow the example of the source code
        -sbq=2 means always put a space between the backslash and quote

    The default is -sbq=1, meaning that a space will be used if there is one in the source code.

Trimming trailing whitespace from lines of POD
    -trp or --trim-pod will remove trailing whitespace from lines of POD. The default is not to do this.

  Comment Controls
Perltidy has a number of ways to control the appearance of both block comments and side comments. The term block comment here refers to a full-line comment, whereas side comment will refer to a comment which appears on a line to the right of some code.

Perltidy does not do any word wrapping of commented text to match a selected maximum line length. This is because there is no way to determine if this is appropriate for the given content. However, an interactive program named perlcomment.pl is available in the examples folder of the perltidy distribution which can assist in doing this.

-ibc,  --indent-block-comments
    Block comments normally look best when they are indented to the same level as the code which follows them. This is the default behavior, but you may use -nibc to keep block comments left-justified. Here is an example:

                 # this comment is indented      (-ibc, default)
                 if ($task) { yyy(); }

    The alternative is -nibc:

     # this comment is not indented              (-nibc)
                 if ($task) { yyy(); }

    See also the next item, -isbc, as well as -sbc, for other ways to have some indented and some outdented block comments.

-isbc,  --indent-spaced-block-comments
    If there is no leading space on the line, then the comment will not be indented, and otherwise it may be.

    If both -ibc and -isbc are set, then -isbc takes priority.

-olc, --outdent-long-comments
    When -olc is set, lines which are full-line (block) comments longer than the value maximum-line-length will have their indentation removed. This is the default; use -nolc to prevent outdenting.

-msc=n,  --minimum-space-to-comment=n
    Side comments look best when lined up several spaces to the right of code. Perltidy will try to keep comments at least n spaces to the right. The default is n=4 spaces.

-fpsc=n,  --fixed-position-side-comment=n
    This parameter tells perltidy to line up side comments in column number n whenever possible. The default, n=0, will not do this.

-iscl,  --ignore-side-comment-lengths
    This parameter causes perltidy to ignore the length of side comments when setting line breaks. The default, -niscl, is to include the length of side comments when breaking lines to stay within the length prescribed by the -l=n maximum line length parameter. For example, the following single line would remain intact with -l=50 and -iscl:

        # perltidy -l=50 -iscl
        $vmsfile =~ s/;[\d\-]*$//;    # Clip off version number

    whereas without the -iscl flag the line will be broken:

        # perltidy -l=50
        $vmsfile =~
          s/;[\d\-]*$//;    # Clip off version number

-ipc,  --ignore-perlcritic-comments
    Perltidy, by default, will look for side comments beginning with ## no critic and ignore their lengths when making line break decisions, even if the user has not set -iscl. The reason is that an unwanted line break can make these special comments ineffective in controlling perlcritic.

    Setting --ignore-perlcritic-comments tells perltidy not to look for these ## no critic comments.

-hsc, --hanging-side-comments
    By default, perltidy tries to identify and align "hanging side comments", which are something like this:

            my $IGNORE = 0;    # This is a side comment
                               # This is a hanging side comment
                               # And so is this

    A comment is considered to be a hanging side comment if (1) it immediately follows a line with a side comment, or another hanging side comment, and (2) there is some leading whitespace on the line. To deactivate this feature, use -nhsc or --nohanging-side-comments. If block comments are preceded by a blank line, or have no leading whitespace, they will not be mistaken as hanging side comments.

Closing Side Comments
    Closing side comments are special comments which perltidy can automatically create and place after the closing braces of selected code blocks. They can be useful for code maintenance and debugging. The control parameters are as follows.

    -csc, or --closing-side-comments
        The command -csc (or --closing-side-comments) adds or updates closing side comments. For example, here is a small code snippet

                sub message {
                    if ( !defined( $_[0] ) ) {
                        print("Hello, World\n");
                    }
                    else {
                        print( $_[0], "\n" );
                    }
                }

        And here is the result of processing with "perltidy -csc":

                sub message {
                    if ( !defined( $_[0] ) ) {
                        print("Hello, World\n");
                    }
                    else {
                        print( $_[0], "\n" );
                    }
                } ## end sub message

        A closing side comment was added for "sub message" in this case, but not for the "if" and "else" blocks, because they were below the 6 line cutoff limit for adding closing side comments. This limit may be changed with the -csci command, described below.

    -dcsc, or --delete-closing-side-comments
        The command -dcsc (or --delete-closing-side-comments) removes these comments. However, it only removes side comments which have the special prefix, which is '## end' by default.

        If both -dcsc and -csc are included in the same run, then -dcsc operates first to remove old closing side comments. Then, -csc operates to create new closing side comments according to the current parameter settings.

    -csci=n, or --closing-side-comment-interval=n
        where "n" is the minimum number of lines that a block must have in order for a closing side comment to be added. The default value is "n=6". To illustrate:

                # perltidy -csci=2 -csc
                sub message {
                    if ( !defined( $_[0] ) ) {
                        print("Hello, World\n");
                    } ## end if ( !defined( $_[0] ))
                    else {
                        print( $_[0], "\n" );
                    } ## end else [ if ( !defined( $_[0] ))
                } ## end sub message

        Now the "if" and "else" blocks are commented. However, now this has become very cluttered.

    -cscl=string, or --closing-side-comment-list
        where "string" is a list of block types to be tagged with closing side comments. By default, all code block types preceded by a keyword or label (such as "if", "sub", and so on) will be tagged. The -cscl command changes the default list to be any selected block types; see "Specifying Block Types". For example, the following command requests that only "sub"'s, labels, "BEGIN", and "END" blocks be affected by operations which add (-csc) or delete (-dcsc) closing side comments:

           --closing-side-comment-list='sub : BEGIN END'

    -cscxl=string, or --closing-side-comment-exclusion-list
        where "string" is a list of block types which should NOT be tagged with closing side comments. If a block type appears in both -cscl and -cscxl, then -cscxl has priority and the block will not be tagged.

        For example, the following command requests that anonymous subs should not be affected by any -csc or -dcsc operation:

           --closing-side-comment-exclusion-list='asub'

        By default, no block types are excluded.

    -csct=n, or --closing-side-comment-maximum-text=n
        The text appended to certain block types, such as an "if" block, is whatever lies between the keyword introducing the block, such as "if", and the opening brace. Since this might be too much text for a side comment, there needs to be a limit, and that is the purpose of this parameter. The default value is "n=20", meaning that no additional tokens will be appended to this text after its length reaches 20 characters. Omitted text is indicated with "...". (Tokens, including sub names, are never truncated, however, so actual lengths may exceed this). To illustrate, in the above example, the appended text of the first block is " ( !defined( $_[0] )...". The existing limit of "n=20" caused this text to be truncated, as indicated by the "...". See the next flag for additional control of the abbreviated text.

    -cscb, or --closing-side-comments-balanced
        As discussed in the previous item, when the closing-side-comment-maximum-text limit is exceeded the comment text must be truncated. Older versions of perltidy terminated with three dots, and this can still be achieved with -ncscb:

          perltidy -csc -ncscb
          } ## end foreach my $foo (sort { $b cmp $a ...

        However this causes a problem with editors which cannot recognize comments or are not configured to do so because they cannot "bounce" around in the text correctly. The -cscb flag has been added to help them by appending appropriate balancing structure:

          perltidy -csc -cscb
          } ## end foreach my $foo (sort { $b cmp $a ... })

        The default is -cscb.

    -csce=n, or --closing-side-comment-else-flag=n
        The default, n=0, places the text of the opening "if" statement after any terminal "else".

        If n=2 is used, then each "elsif" is also given the text of the opening "if" statement. Also, an "else" will include the text of a preceding "elsif" statement. Note that this may result some long closing side comments.

        If n=1 is used, the results will be the same as n=2 whenever the resulting line length is less than the maximum allowed.

    -cscw, or --closing-side-comment-warnings
        This parameter is intended to help make the initial transition to the use of closing side comments. It causes two things to happen if a closing side comment replaces an existing, different closing side comment: first, an error message will be issued, and second, the original side comment will be placed alone on a new specially marked comment line for later attention.

        The intent is to avoid clobbering existing hand-written side comments which happen to match the pattern of closing side comments. This flag should only be needed on the first run with -csc.

    -cscp=string, or --closing-side-comment-prefix=string
        This parameter changes the prefix which is used for closing side comments. The default prefix is "## end". All closing side comments begin with this prefix, and it is used to recognize them in order to update, delete, and format them. Any comment identified as a closing side comment will be placed just a single space to the right of its closing brace.

        This parameter is available in case the default causes a conflict with other software, but it should not normally be used because it can complicate keeping code updated in the event that code formatted with different prefixes are mixed. The problem is that in any formatting pass, the various -csc* parameters are restricted to working with a single closing side comment prefix. So if code has closing side comments with differing prefixes, it will take multiple passes to convert them back to a single new prefix.

        For a simple example, suppose we have code which was formatted with prefix "-cscp='## END'", and we want to convert those comments back to the default prefix. It would take two passes, such as:

        Pass 1 would find and remove old closing side comments with prefix '## END':

           perltidy -cscp='## END' -dcsc oldfile -o tmpfile

        Pass 2 could then adds new comments with the default prefix:

           perltidy -csc tmpfile -o newfile

    Important Notes on Closing Side Comments:

    •   Closing side comments are only placed on lines terminated with a closing brace. Certain closing styles, such as the use of cuddled elses (-ce), preclude the generation of some closing side comments.

    •   Please note that adding or deleting of closing side comments takes place only through the commands -csc or -dcsc. The other commands, if used, merely modify the behavior of these two commands.

    •   It is recommended that the -cscw flag be used along with -csc on the first use of perltidy on a given file. This will prevent loss of any existing side comment data which happens to have the csc prefix.

    •   Once you use -csc, you should continue to use it so that any closing side comments remain correct as code changes. Otherwise, these comments will become incorrect as the code is updated.

    •   If you edit the closing side comments generated by perltidy, you should also change the prefix to be different from the closing side comment prefix. Otherwise, your edits will be lost when you rerun perltidy with -csc. For example, you could simply change "## end" to be "## End", since the test is case sensitive. You may also want to use the -ssc flag to keep these modified closing side comments spaced the same as actual closing side comments.

    •   Temporarily generating closing side comments is a useful technique for exploring and/or debugging a perl script, especially one written by someone else. You can always remove them with -dcsc.

Static Block Comments
    Static block comments are block comments with a special leading pattern, "##" by default, which will be treated slightly differently from other block comments. They effectively behave as if they had glue along their left and top edges, because they stick to the left edge and previous line when there is no blank spaces in those places. This option is particularly useful for controlling how commented code is displayed.

    -sbc, --static-block-comments
        When -sbc is used, a block comment with a special leading pattern, "##" by default, will be treated specially.

        Comments so identified are treated as follows:

        •   If there is no leading space on the line, then the comment will not be indented, and otherwise it may be,

        •   no new blank line will be inserted before such a comment, and

        •   such a comment will never become a hanging side comment.

        For example, assuming @month_of_year is left-adjusted, the default formatting for the following snippet is:

            # perltidy -sbc [default]
            @month_of_year = (
                'Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun',
            ##  'Jul', 'Aug', 'Sep', 'Oct', 'Dec', 'Nov'
                'Jul', 'Aug', 'Sep', 'Oct', 'Nov', 'Dec'
            );

        This can be useful for displaying code which has been commented out. Without this convention, the above code would become

            # perltidy -nsbc
            @month_of_year = (
                'Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun',

                ##  'Jul', 'Aug', 'Sep', 'Oct', 'Dec', 'Nov'
                'Jul', 'Aug', 'Sep', 'Oct', 'Nov', 'Dec'
            );

        which is less clear. The default is to use -sbc. This may be deactivated with -nsbc.

    -sbcp=string, --static-block-comment-prefix=string
        This parameter defines the prefix used to identify static block comments when the -sbc parameter is set. The default prefix is "##", corresponding to "-sbcp=##". The prefix is actually part of a perl pattern used to match lines and it must either begin with "#" or "^#". In the first case a prefix ^\s* will be added to match any leading whitespace, while in the second case the pattern will match only comments with no leading whitespace. For example, to identify all comments as static block comments, one would use "-sbcp=#". To identify all left-adjusted comments as static block comments, use "-sbcp='^#'".

        Please note that -sbcp merely defines the pattern used to identify static block comments; it will not be used unless the switch -sbc is set. Also, please be aware that since this string is used in a perl regular expression which identifies these comments, it must enable a valid regular expression to be formed.

        A pattern which can be useful is:

            -sbcp=^#{2,}[^\s#]

        This pattern requires a static block comment to have at least one character which is neither a # nor a space. It allows a line containing only '#' characters to be rejected as a static block comment. Such lines are often used at the start and end of header information in subroutines and should not be separated from the intervening comments, which typically begin with just a single '#'.

    -osbc, --outdent-static-block-comments
        The command -osbc will cause static block comments to be outdented by the number of --continuation-spaces=n, if possible.

Static Side Comments
    Static side comments are side comments with a special leading pattern. This option can be useful for controlling how commented code is displayed when it is a side comment.

    -ssc, --static-side-comments
        When -ssc is used, a side comment with a static leading pattern, which is "##" by default, will be spaced only a single space from previous character, and it will not be vertically aligned with other side comments.

        The default is -nssc.

    -sscp=string, --static-side-comment-prefix=string
        This parameter defines the prefix used to identify static side comments when the -ssc parameter is set. The default prefix is "##", corresponding to "-sscp=##".

        Please note that -sscp merely defines the pattern used to identify static side comments; it will not be used unless the switch -ssc is set. Also, note that this string is used in a perl regular expression which identifies these comments, so it must enable a valid regular expression to be formed.

  Skipping Selected Sections of Code
Selected lines of code may be passed verbatim to the output without any formatting by marking the starting and ending lines with special comments. There are two options for doing this. The first option is called --format-skipping or -fs, and the second option is called --code-skipping or -cs.

In both cases the lines of code will be output without any changes. The difference is that in --format-skipping perltidy will still parse the marked lines of code and check for errors, whereas in --code-skipping perltidy will simply pass the lines to the output without any checking.

Both of these features are enabled by default and are invoked with special comment markers. --format-skipping uses starting and ending markers '#<<<' and '#>>>', like this:

 #<<<  format skipping: do not let perltidy change my nice formatting
    my @list = (1,
                1, 1,
                1, 2, 1,
                1, 3, 3, 1,
                1, 4, 6, 4, 1,);
 #>>>

--code-skipping uses starting and ending markers '#<<V' and '#>>V', like this:

 #<<V  code skipping: perltidy passes this verbatim, no error checking

    token ident_digit {
        [ [ <?word> | _ | <?digit> ] <?ident_digit>
        |   <''>
        ]
    };

 #>>V

(The last character V is like a < or > rotated 90 degrees). Additional text may appear on the special comment lines provided that it is separated from the marker by at least one space, as in the above examples.

It is recommended to use --code-skipping only if you need to hide a block of an extended syntax which would produce errors if parsed by perltidy, and use --format-skipping otherwise. This is because the --format-skipping option provides the benefits of error checking, and there are essentially no limitations on which lines to which it can be applied. The --code-skipping option, on the other hand, does not do error checking and its use is more restrictive because the code which remains, after skipping the marked lines, must be syntactically correct code with balanced containers.

Any number of code-skipping or format-skipping sections may appear in a file.

When multiple sections of code are marked for format-skipping, the beginning and ending markers must alternate from the beginning of the file to the end (i.e., code skipping sections cannot be stacked). If markers do not alternate, then a warning will occur and formatting will not be done. This is to help catch errors early. Normally, the first marker in a file will be a beginning marker and the last marker will be an ending marker, but this is not necessary. If the first marker is an ending marker, then format skipping starts at the first line and continues to that ending marker (unless the --detect-format-skipping-from-start flag has been turned off; see below). If the last marker is a beginning marker, then skipping continues to the end of the file.

For code-skipping, the rules for multiple sections are a little more primitive because perltidy is simultaneously parsing the text while looking for markers. There are two cases, depending on the companion flag --code-skipping-from-start, described below. If this flag has not been set, which is the default, then code skipping begins when a beginning marker is encountered and continues until an ending marker, or the end of the file, is reached. If the --code-skipping-from-start flag is set, then code skipping begins with the first line and continues until an ending marker, or the end of the file, is reached. In both cases, code skipping will restart if a beginning marker is encountered.

These features should be used sparingly to avoid littering code with markers, but they can be helpful for working around occasional problems.

Note that it may be possible to avoid the use of --format-skipping for the specific case of a comma-separated list of values, as in the above example, by simply inserting a blank or comment somewhere between the opening and closing parens. See the section "Controlling List Formatting".

The following sections describe the available controls for these options. They should not normally be needed.

-fs,  --format-skipping
    This is the master switch for format skipping. As explained above, this flag, which is enabled by default, causes any code between special beginning and ending comment markers to be passed to the output without formatting. The code between the comments is still checked for errors however. The default beginning marker is #<<< and the default ending marker is #>>>.

    This feature can be disabled with -nfs. This should not normally be necessary.

-fsb=string,  --format-skipping-begin=string
    This and the next parameter allow the special beginning and ending comments to be changed. However, it is recommended that they only be changed if there is a conflict between the default values and some other use. If they are used, it is recommended that they only be entered in a .perltidyrc file, rather than on a command line. This is because properly escaping these parameters on a command line can be difficult.

    If changed comment markers do not appear to be working, use the -log flag and examine the .LOG file to see if and where they are being detected.

    The default is equivalent to -fsb='#<<<'. The string that you enter must begin with a # and should be in quotes as necessary to get past the command shell of your system. It is actually the leading text of a pattern that is constructed by appending a '\s', so you must also include backslashes for characters to be taken literally rather than as patterns.

    Some examples show how example strings become patterns:

     -fsb='#\{\{\{' becomes /^#\{\{\{\s/ which matches #{{{ but not #{{{{
     -fsb='#\*\*'   becomes /^#\*\*\s/   which matches #** but not #***
     -fsb='#\*{2,}' becomes /^#\*{2,}\s/ which matches #** and #*****

-fse=string,  --format-skipping-end=string
    The -fse=string is the corresponding parameter used to change the ending marker for format skipping. The default is equivalent to -fse='#<<<'.

-dfsfs,  --detect-format-skipping-from-start
    If perltidy encounters a format skipping end comment before any format skipping begin comment, then by default it will assume that format skipping begins with the first line of the file. Use -ndfsfs, or --nodetect-format-skipping-from-start to avoid making this assumption. In that case, if the first format skipping marker in a file is an end marker, it will be ignored.

-cs,  --code-skipping
    This is the master switch for code skipping. This flag, which is enabled by default, causes any code between special beginning and ending comment markers to be directly passed to the output without any error checking or formatting. Essentially, perltidy treats it as if it were a block of arbitrary text. The default beginning marker is #<<V and the default ending marker is #>>V.

    This feature can be disabled with -ncs. This should not normally be necessary.

-csb=string,  --code-skipping-begin=string
    This may be used to change the beginning comment for a --code-skipping section, and its use is similar to the -fsb=string. The default is equivalent to -csb='#<<V'.

-cse=string,  --code-skipping-end=string
    This may be used to change the ending comment for a --code-skipping section, and its use is similar to the -fse=string. The default is equivalent to -cse='#>V'>.

-csfs,  --code-skipping-from-start
    When this flag is set, and code skipping has not been disabled, code skipping begins from the start of a file even though there is no beginning code skipping comment. In other words, setting this flag is like having a beginning marker line '#<<V' just before the first line of the file. Code skipping will continue until an ending comment is reached.

  Formatting Only Tagged Sections of Code
A command --skip-formatting-except-id=tag, or -sfei=tag, is available to cause perltidy to only format sections of code which are labeled with the selected tag on "format-skipping" comments.

For example, the tagged sections might contain tables which are best formatted with special values of the --maximum-line-length parameter. Or perhaps a tagged section is a deeply nested table which would avoid unwanted line breaks if formatted with less indentation by using a special value of --starting-indentation-level=n.

The tag name is introduced with the added text id=NAME after one or more spaces on the opening format-skipping comment. The tag NAME can be any combination of letters and numbers, and there must not be any space around the equals sign.

For example

 #<<< id=LongLines
   ...
 #>>>

The code in this section will be treated like any other format skipping section unless the parameter --skip-formatting-except-id=LongLines is entered. In that case, it will be formatted.

Here are some points regarding this option:

•   The special option --skip-formatting-except-id='-', or -sfei='-', means skip all formatting (since a tag named '-' does not exist). This will allow the code to be scanned for problems, but the formatting will not be changed. The -notidy parameter can also be used to skip formatting, but it exits at an earlier point in the process, so it runs faster but does not perform as many code checks.

•   The special option --skip-formatting-except-id='*', or -sfei='*', means to format all sections marked for format skipping, regardless of any id= comment. This can eliminate the need for adding id= to the format skipping markers in simple cases.

•   The sections which are being skipped or formatted can be determined by dumping a log file with the -g parameter.

•   When this option is used, the starting indentation is still guessed from the first code in the file, even if it is not being formatted. If this results in an unwanted indentation of the tagged section, then the parameter --starting-indentation-level=n, or -sil=n, can be used to set the desired indentation.

•   If the first format skipping marker in a file is an ending marker, then it ends a format skipping section which starts from the first line of the file without a beginning marker. So the usual method of putting an identifier tag on the beginning marker cannot be used. In this special case, an identifier for that section may be placed on the ending marker. This is the only case where an identifier is read from an ending marker.

  Formatting a Limited Range of Lines
A command --line-range-tidy=n1:n2 is available to process just a selected range of lines of an input stream with perltidy. This command is mainly of interest for programming interactive code editors. When it is used, the entire input stream is read but just the selected range of lines of the input file are processed by the perltidy tokenizer and formatter, and then the stream is reassembled for output. The selected lines need to contain a complete statement or balanced container. Otherwise, a syntax error will occur and the code will not be tidied. There are a couple of limitations on the use of this command: (1) it may not be applied to multiple files, and (2) it only applies to code tidying and not, for example, html formatting.

-lrt=n1:n2,  --line-range-tidy=n1:n2
    The range of lines is specified by integers n1 and n2, where n1 is the first line number to be formatted (start counting with 1) and n2 is the last line number to be formatted. If n2 is not given, or exceeds the actual number of lines, then formatting continues to the end of the file.

    Examples:

     --line-range-tidy=43:109      # tidy lines 43 through 109
     --line-range-tidy=' 43 : 109' # tidy lines 43 through 109
     --line-range-tidy=1:          # tidy all lines
     --line-range-tidy=0:90        # ERROR (n1 must be >= 1)

    The second example shows that spaces are okay if placed in quotes.

  Line Break Control
The parameters in this and the next sections control breaks after non-blank lines of code. Blank lines are controlled separately by parameters in the section "Blank Line Control".

-dnl,  --delete-old-newlines
    By default, perltidy first deletes all old line break locations, and then it looks for good break points to match the desired line length. Use -ndnl or --nodelete-old-newlines to force perltidy to retain all old line break points.

-anl,  --add-newlines
    By default, perltidy will add line breaks when necessary to create continuations of long lines and to improve the script appearance. Use -nanl or --noadd-newlines to prevent any new line breaks.

    This flag does not prevent perltidy from eliminating existing line breaks; see --freeze-newlines to completely prevent changes to line break points.

-fnl,  --freeze-newlines
    If you do not want any changes to the line breaks within lines of code in your script, set -fnl, and they will remain fixed, and the rest of the commands in this section and sections "Controlling List Formatting", "Retaining or Ignoring Existing Line Breaks". You may want to use --nooutdent-long-lines with this.

    Note: If you also want to keep your blank lines exactly as they are, you can use the --freeze-blank-lines flag which is described in the section "Blank Line Control".

  Controlling Breaks at Braces, Parens, and Square Brackets

-ce,   --cuddled-else
    Enable the "cuddled else" style, in which "else" and "elsif" are follow immediately after the curly brace closing the previous block. The default is not to use cuddled elses, and is indicated with the flag -nce or --nocuddled-else. Here is a comparison of the alternatives:

      # -ce
      if ($task) {
          yyy();
      } else {
          zzz();
      }

      # -nce (default)
      if ($task) {
          yyy();
      }
      else {
          zzz();
      }

    In this example the keyword else is placed on the same line which begins with the preceding closing block brace and is followed by its own opening block brace on the same line. Other keywords and function names which are formatted with this "cuddled" style are elsif, continue, catch, finally.

    Other block types can be formatted by specifying their names on a separate parameter --cuddled-block-list, described in a later section.

    Cuddling between a pair of code blocks requires that the closing brace of the first block start a new line. If this block is entirely on one line in the input file, it is necessary to decide if it should be broken to allow cuddling. This decision is controlled by the flag --cuddled-break-options=n (-cbo=n) discussed below. The default and recommended value of -cbo=1 bases this decision on the first block in the chain. If it spans multiple lines then cuddling is made and continues along the chain, regardless of the sizes of subsequent blocks. Otherwise, short lines remain intact.

    So for example, the --cuddled-else flag would not have any effect if the above snippet is rewritten as

      if ($task) { yyy() }
      else {    zzz() }

    If the first block spans multiple lines, then cuddling can be done and will continue for the subsequent blocks in the chain, as illustrated in the previous snippet.

    If there are blank lines between cuddled blocks they will be eliminated (unless the flag --blank-lines-prevent-cuddles is set; it is described below). If there are comments after the closing brace where cuddling would occur then cuddling will be prevented. If this occurs, cuddling will restart later in the chain if possible.

-cb,   --cuddled-blocks
    This flag is equivalent to --cuddled-else (-ce).

-cbl,    --cuddled-block-list
    The built-in default cuddled block types are else, elsif, continue, catch, finally.

    Additional block types to which the --cuddled-blocks style applies can be defined by this parameter. This parameter is a character string, giving a list of block types separated by commas or spaces. For example, to cuddle code blocks of type sort, map and grep, in addition to the default types, the string could be set to

      -cbl="sort map grep"

    or equivalently

      -cbl=sort,map,grep

    Note however that these particular block types are typically short so there might not be much opportunity for the cuddled format style.

    Using commas avoids the need to protect spaces with quotes.

    As a diagnostic check, the flag --dump-cuddled-block-list or -dcbl can be used to view the hash of values that are generated by this flag.

    Finally, note that the --cuddled-block-list parameter by itself merely specifies which blocks are formatted with the cuddled format. It has no effect unless this formatting style is activated with --cuddled-else.

-cblx,    --cuddled-block-list-exclusive
    When cuddled else formatting is selected with --cuddled-else, setting this flag causes perltidy to ignore its built-in defaults and rely exclusively on the block types specified on the --cuddled-block-list flag described in the previous section. For example, to avoid using cuddled catch and finally, which are among the defaults, the following set of parameters could be used:

      perltidy -ce -cbl='else elsif continue' -cblx

-cbo=n, --cuddled-break-option=n
    Cuddled formatting is only possible between a pair of code blocks if the closing brace of the first block starts a new line. If a block is encountered which is entirely on a single line, and cuddled formatting is selected, it is necessary to make a decision as to whether or not to "break" the block, meaning to cause it to span multiple lines. This parameter controls that decision. The options are:

       cbo=0  Never force a short block to break.
       cbo=1  If the first of a pair of blocks is broken in the input
              file, then break the second [DEFAULT].
       cbo=2  Break open all blocks for maximal cuddled formatting.

    The default and recommended value is cbo=1. With this value, if the starting block of a chain spans multiple lines, then a cascade of breaks will occur for remaining blocks causing the entire chain to be cuddled.

    The option cbo=0 can produce erratic cuddling if there are numerous one-line blocks.

    The option cbo=2 produces maximal cuddling but will not allow any short blocks.

-blpc, --blank-lines-prevent-cuddles
    By default, cuddling operations occur even if a blank line separates a closing brace from the line to which it will be joined. This flag can be set to prevent cuddling across such a blank line. For example, cuddling will be prevented in the following example because of the -blpc flag:

        # perltidy -ce -blpc
        if ($task) {
            yyy();
        }

        else {
            zzz();
        }

-bl, --opening-brace-on-new-line, or --brace-left
    Use the flag -bl to place an opening block brace on a new line:

      if ( $input_file eq '-' )
      {
          ...
      }

    By default it applies to all structural blocks except sort map grep eval and anonymous subs.

    The default is -nbl which places an opening brace on the same line as the keyword introducing it if possible. For example,

      # default
      if ( $input_file eq '-' ) {
         ...
      }

    When -bl is set, the blocks to which this applies can be controlled with the parameters --brace-left-list and --brace-left-exclusion-list described in the next sections.

-bll=s, --brace-left-list=s
    Use this parameter to change the types of block braces for which the -bl flag applies; see "Specifying Block Types". For example, -bll='if elsif else sub' would apply it to only "if/elsif/else" and named sub blocks. The default is all blocks, -bll='*'.

-blxl=s, --brace-left-exclusion-list=s
    Use this parameter to exclude types of block braces for which the -bl flag applies; see "Specifying Block Types". For example, the default settings -bll='*' and -blxl='sort map grep eval asub' mean all blocks except sort map grep eval and anonymous sub blocks.

    Note that the lists -bll=s and -blxl=s control the behavior of the -bl flag but have no effect unless the -bl flag is set. These two lists provide complete control for this flag, but two shortcut flags are available and described in the next sections.

-sbl,    --opening-sub-brace-on-new-line
    The flag -sbl provides a shortcut way to turn on -bl just for named subs. The same effect can be achieved by turning on -bl with the block list set as -bll='sub'. To avoid conflicts, it is recommended to either use the more general list method described above to control -bl, or this shortcut method, but not both.

    For example,

     perltidy -sbl

    produces this result:

     sub message
     {
        if (!defined($_[0])) {
            print("Hello, World\n");
        }
        else {
            print($_[0], "\n");
        }
     }

    This negative version of this flag, -nsbl, turns off -bl for named subs. The same effect can be achieved with the exclusion list method, -blxl=sub.

-asbl,    --opening-anonymous-sub-brace-on-new-line
    The flag -asbl is like the -sbl flag except that it applies to anonymous sub's instead of named subs. The same effect can be achieved by turning on -bl with the block list set to include -bll='asub'.

    For example

     perltidy -asbl

    produces this result:

     $a = sub
     {
         if ( !defined( $_[0] ) ) {
             print("Hello, World\n");
         }
         else {
             print( $_[0], "\n" );
         }
     };

    This negative version of this flag, -nasbl, turns off -bl for anonymous subs.

-bli,    --brace-left-and-indent
    The flag -bli is similar to the -bl flag but in addition it causes one unit of continuation indentation ( see --continuation-indentation ) to be placed before an opening and closing block braces.

    For example

            # perltidy -bli
            if ( $input_file eq '-' )
              {
                important_function();
              }

    By default, this extra indentation occurs for block types: if, elsif, else, unless, while, for, foreach, do, and also named subs and blocks preceded by a label. The next item shows how to change this.

    Note: The -bli flag is similar to the -bl flag, with the difference being that braces get indented. But these two flags are implemented independently, and have different default settings for historical reasons. If desired, a mixture of effects can be achieved if desired by turning them both on with different -list settings. In the event that both settings are selected for a certain block type, the -bli style has priority.

-blil=s,    --brace-left-and-indent-list=s
    Use this parameter to change the types of block braces for which the -bli flag applies; see "Specifying Block Types".

    The default is -blil='if else elsif unless while for foreach do : sub'.

-blixl=s, --brace-left-and-indent-exclusion-list=s
    Use this parameter to exclude types of block braces for which the -bli flag applies; see "Specifying Block Types".

    This might be useful in conjunction with selecting all blocks -blil='*'. The default setting is -blixl=' ', which does not exclude any blocks.

    Note that the two parameters -blil and -blixl control the behavior of the -bli flag but have no effect unless the -bli flag is set.

-bar,    --opening-brace-always-on-right
    The default style, -nbl places the opening code block brace on a new line if it does not fit on the same line as the opening keyword, like this:

            if ( $bigwasteofspace1 && $bigwasteofspace2
              || $bigwasteofspace3 && $bigwasteofspace4 )
            {
                big_waste_of_time();
            }

    To force the opening brace to always be on the right, use the -bar flag. In this case, the above example becomes

            if ( $bigwasteofspace1 && $bigwasteofspace2
              || $bigwasteofspace3 && $bigwasteofspace4 ) {
                big_waste_of_time();
            }

    A conflict occurs if both --opening-brace-on_new-line (-bl) and -bar are specified.

-cpb, --cuddled-paren-brace
    A related parameter, --cuddled-paren-brace, causes perltidy to join two lines which otherwise would be

          )
        {

    to be

        ) {

    For example:

        # default
        foreach my $dir (
            '05_lexer', '07_token', '08_regression', '11_util',
            '13_data',  '15_transform'
          )
        {
            ...
        }

        # perltidy -cpb
        foreach my $dir (
            '05_lexer', '07_token', '08_regression', '11_util',
            '13_data',  '15_transform'
        ) {
            ...;
        }

-cpbw, --cuddled-paren-brace-weld
    This parameter modifies the -cuddled-paren-brace parameter of the previous to actively form these cuddled pairs whenever possible. In situations where the opening block brace will be placed on a new line, and separated from a closing paren on the previous line, it will move a preceding closing paren there too. So in effect, it causes a closing paren to stay with an opening brace as if they were 'welded' together.

    To illustrate, formatting with -cpb alone gives:

            # perltidy -cpb
            if (   $Kouter_opening == $Kfirst
                && $token_oo eq '('
                && $has_tight_paren{$type_prev} )
            {
                $Kref = $Kprev;
            }

    Here, the option -cpb by itself has no effect here because the ")" and "}" are on different lines. But adding ``-cpbw`` gives:

            # perltidy -cpb -cpbw
            if (
                   $Kouter_opening == $Kfirst
                && $token_oo eq '('
                && $has_tight_paren{$type_prev}
            ) {
                $Kref = $Kprev;
            }

    In this case, the -cpbw modifier has caused the container to be broken open so that its closing paren is on the same line as opening brace.

    The default is not to do this. Note that -cpbw is a modifier and has no effect unless -cpb is also set.

    A limitation is that this operation cannot be done if it would conflict with other parameter settings, such as --opening-brace-on-new-line and --opening-brace-always-on-right.

-otr,  --opening-token-right and related flags
    The -otr flag is a hint that perltidy should not place a break between a comma and an opening token. For example:

        # default formatting
        push @{ $self->{$module}{$key} },
          {
            accno       => $ref->{accno},
            description => $ref->{description}
          };

        # perltidy -otr
        push @{ $self->{$module}{$key} }, {
            accno       => $ref->{accno},
            description => $ref->{description}
          };

    The flag -otr is actually an abbreviation for three other flags which can be used to control parens, hash braces, and square brackets separately if desired:

      -opr  or --opening-paren-right
      -ohbr or --opening-hash-brace-right
      -osbr or --opening-square-bracket-right

-bbhb=n,  --break-before-hash-brace=n and related flags
    When a list of items spans multiple lines, the default formatting is to place the opening brace (or other container token) at the end of the starting line, like this:

        $romanNumerals = {
            one   => 'I',
            two   => 'II',
            three => 'III',
            four  => 'IV',
        };

    This flag can change the default behavior to cause a line break to be placed before the opening brace according to the value given to the integer n:

      -bbhb=0 never break [default]
      -bbhb=1 stable: break if the input script had a break
      -bbhb=2 break if list is 'complex' (see note below)
      -bbhb=3 always break

    For example,

        # perltidy -bbhb=3
        $romanNumerals =
          {
            one   => 'I',
            two   => 'II',
            three => 'III',
            four  => 'IV',
          };

    There are several points to note about this flag:

    •   This parameter only applies if the opening brace is preceded by an '=' or '=>'.

    •   This parameter only applies if the contents of the container looks like a list. The contents need to contain some commas or '=>'s at the next interior level to be considered a list.

    •   For the n=2 option, a list is considered 'complex' if it is part of a nested list structure which spans multiple lines in the input file.

    •   If multiple opening tokens have been 'welded' together with the -wn parameter, then this parameter has no effect.

    •   The indentation of the braces will normally be one level of continuation indentation by default. This can be changed with the parameter -bbhbi=n in the next section.

    •   Similar flags for controlling parens and square brackets are given in the subsequent section.

-bbhbi=n,  --break-before-hash-brace-and-indent=n
    This flag is a companion to -bbhb=n for controlling the indentation of an opening hash brace which is placed on a new line by that parameter. The indentation is as follows:

      -bbhbi=0 one continuation level [default]
      -bbhbi=1 outdent by one continuation level
      -bbhbi=2 indent one full indentation level

    For example:

        # perltidy -bbhb=3 -bbhbi=1
        $romanNumerals =
        {
            one   => 'I',
            two   => 'II',
            three => 'III',
            four  => 'IV',
        };

        # perltidy -bbhb=3 -bbhbi=2
        $romanNumerals =
            {
            one   => 'I',
            two   => 'II',
            three => 'III',
            four  => 'IV',
            };

    Note that this parameter has no effect unless -bbhb=n is also set.

-bbsb=n,  --break-before-square-bracket=n
    This flag is similar to the flag described above, except it applies to lists contained within square brackets.

      -bbsb=0 never break [default]
      -bbsb=1 stable: break if the input script had a break
      -bbsb=2 break if list is 'complex' (part of nested list structure)
      -bbsb=3 always break

-bbsbi=n,  --break-before-square-bracket-and-indent=n
    This flag is a companion to -bbsb=n for controlling the indentation of an opening square bracket which is placed on a new line by that parameter. The indentation is as follows:

      -bbsbi=0 one continuation level [default]
      -bbsbi=1 outdent by one continuation level
      -bbsbi=2 indent one full indentation level

-bbp=n,  --break-before-paren=n
    This flag is similar to -bbhb=n, described above, except it applies to lists contained within parens.

      -bbp=0 never break [default]
      -bbp=1 stable: break if the input script had a break
      -bpb=2 break if list is 'complex' (part of nested list structure)
      -bbp=3 always break

-bbpi=n,  --break-before-paren-and-indent=n
    This flag is a companion to -bbp=n for controlling the indentation of an opening paren which is placed on a new line by that parameter. The indentation is as follows:

      -bbpi=0 one continuation level [default]
      -bbpi=1 outdent by one continuation level
      -bbpi=2 indent one full indentation level

-bfvt=n,  --brace-follower-vertical-tightness=n
    Some types of closing block braces, such as eval, may be followed by additional code. A line break may be inserted between such a closing brace and the following code depending on the parameter n and the length of the trailing code, as follows:

    If the trailing code fits on a single line, then

      -bfvt=0 Follow the input style regarding break/no-break
      -bfvt=1 Follow the input style regarding break/no-break [Default]
      -bfvt=2 Do not insert a line break

    If the trailing code requires multiple lines, then

      -bfvt=0 Insert a line break
      -bfvt=1 Insert a line break except for a cuddled block chain
      -bfvt=2 Do not insert a line break

    The default is -bfvt=1. The most compact code is achieved with -bfvt=2.

    Example (non-cuddled, multiple lines ):

        # -bfvt=0 or -bvft=1 [DEFAULT]
        eval {
            ( $line, $cond ) = $self->_normalize_if_elif($line);
            1;
        }
          or die sprintf "Error at line %d\nLine %d: %s\n%s",
          ( $line_info->start_line_num() ) x 2, $line, $@;

        # -bfvt=2
        eval {
            ( $line, $cond ) = $self->_normalize_if_elif($line);
            1;
        } or die sprintf "Error at line %d\nLine %d: %s\n%s",
          ( $line_info->start_line_num() ) x 2, $line, $@;

    Example (cuddled, multiple lines):

        # -bfvt=0
        eval {
            #STUFF;
            1;    # return true
        }
          or do {
            ##handle error
          };

        # -bfvt=1 [DEFAULT] or -bfvt=2
        eval {
            #STUFF;
            1;    # return true
        } or do {
            ##handle error
        };

  Welding

-wn,  --weld-nested-containers
    The -wn flag causes closely nested pairs of opening and closing container symbols (curly braces, brackets, or parens) to be "welded" together, meaning that they are treated as if combined into a single unit, with the indentation of the innermost code reduced to be as if there were just a single container symbol.

    For example:

            # default formatting
            do {
                {
                    next if $x == $y;
                }
            } until $x++ > $z;

            # perltidy -wn
            do { {
                next if $x == $y;
            } } until $x++ > $z;

    When this flag is set perltidy makes a preliminary pass through the file and identifies all nested pairs of containers. To qualify as a nested pair, the closing container symbols must be immediately adjacent and the opening symbols must either (1) be adjacent as in the above example, or (2) have an anonymous sub declaration following an outer opening container symbol which is not a code block brace, or (3) have an outer opening paren separated from the inner opening symbol by any single non-container symbol or something that looks like a function evaluation, as illustrated in the next examples. An additional option (4) which can be turned on with the flag --weld-fat-comma is when the opening container symbols are separated by a hash key and fat comma (=>).

    Any container symbol may serve as both the inner container of one pair and as the outer container of an adjacent pair. Consequently, any number of adjacent opening or closing symbols may join together in weld. For example, here are three levels of wrapped function calls:

            # default formatting
            my (@date_time) = Localtime(
                Date_to_Time(
                    Add_Delta_DHMS(
                        $year, $month,  $day, $hour, $minute, $second,
                        '0',   $offset, '0',  '0'
                    )
                )
            );

            # perltidy -wn
            my (@date_time) = Localtime( Date_to_Time( Add_Delta_DHMS(
                $year, $month,  $day, $hour, $minute, $second,
                '0',   $offset, '0',  '0'
            ) ) );

    Notice how the indentation of the inner lines are reduced by two levels in this case. This example also shows the typical result of this formatting, namely it is a sandwich consisting of an initial opening layer, a central section of any complexity forming the "meat" of the sandwich, and a final closing layer. This predictable structure helps keep the compacted structure readable.

    The inner sandwich layer is required to be at least one line thick. If this cannot be achieved, welding does not occur. This constraint can cause formatting to take a couple of iterations to stabilize when it is first applied to a script. The --converge flag can be used to insure that the final format is achieved in a single run.

    Here is an example illustrating a welded container within a welded containers:

        # default formatting
        $x->badd(
            bmul(
                $class->new(
                    abs(
                        $sx * int( $xr->num() ) & $sy * int( $yr->num() )
                    )
                ),
                $m
            )
        );

        # perltidy -wn
        $x->badd( bmul(
            $class->new( abs(
                $sx * int( $xr->num() ) & $sy * int( $yr->num() )
            ) ),
            $m
        ) );

    The welded closing tokens are by default on a separate line but this can be modified with the --vertical-tightness-closing=n (-vtc=n) flag (described in the next section). For example, the same example adding -vtc=2 is

        # perltidy -wn -vtc=2
        $x->badd( bmul(
            $class->new( abs(
                $sx * int( $xr->num() ) & $sy * int( $yr->num() ) ) ),
            $m ) );

    This format option is quite general but there are some limitations.

    One limitation is that any line length limit still applies and can cause long welded sections to be broken into multiple lines.

    Also, the stacking of containers defined by this flag have priority over any other container stacking flags. This is because any welding is done first.

-wfc,  --weld-fat-comma
    When the -wfc flag is set, along with -wn (--weld-nested-containers), perltidy is allowed to weld an opening paren to an inner opening container when they are separated by a hash key and fat comma (=>). for example

        # perltidy -wn -wfc
        elf->call_method( method_name_foo => {
            some_arg1       => $foo,
            some_other_arg3 => $bar->{'baz'},
        } );

    This option is off by default.

-wnxl=s,  --weld-nested-exclusion-list
    The -wnxl=s flag provides some control over the types of containers which can be welded. The -wn flag by default is "greedy" in welding adjacent containers. If it welds more types of containers than desired, this flag provides a capability to reduce the amount of welding by specifying a list of things which should not be welded.

    The logic in perltidy to apply this is straightforward. As each container token is being considered for joining a weld, any exclusion rules are consulted and used to reject the weld if necessary.

    This list is a string with space-separated items. Each item consists of up to three pieces of information: (1) an optional position, (2) an optional preceding type, and (3) a container type.

    The only required piece of information is a container type, which is one of '(', '[', '{' or 'q'. The first three of these are container tokens and the last represents a quoted list. For example the string

      -wnxl='[ { q'

    means do NOT include square-brackets, braces, or quotes in any welds. The only unspecified container is '(', so this string means that only welds involving parens will be made.

    To illustrate, the following welded snippet consists of a chain of three welded containers with types '(' '[' and 'q':

        # perltidy -wn
        skip_symbols( [ qw(
            Perl_dump_fds
            Perl_ErrorNo
            Perl_GetVars
            PL_sys_intern
        ) ] );

    Even though the qw term uses parens as the quote delimiter, it has a special type 'q' here. If it appears in a weld it always appears at the end of the welded chain.

    Any of the container types '[', '{', and '(' may be prefixed with a position indicator which is either '^', to indicate the first token of a welded sequence, or '.', to indicate an interior token of a welded sequence. (Since a quoted string 'q' always ends a chain it does need a position indicator).

    For example, if we do not want a sequence of welded containers to start with a square bracket we could use

      -wnxl='^['

    In the above snippet, there is a square bracket but it does not start the chain, so the formatting would be unchanged if it were formatted with this restriction.

    A third optional item of information which can be given is an alphanumeric letter which is used to limit the selection further depending on the type of token immediately before the container. If given, it goes just before the container symbol. The possible letters are currently 'k', 'K', 'f', 'F', 'w', and 'W', with these meanings (see "Specifying Paren Types"):

     'k' matches if the previous nonblank token is a perl keyword
         (such as 'if', 'while'),
     'K' matches if 'k' does not: previous token is not a keyword
     'f' matches if previous token is a function (not a keyword)
     'F' matches if 'f' does not
     'w' matches if either 'k' or 'f' match
     'W' matches if 'w' does not

    For example, compare

            # perltidy -wn
            if ( defined( $_Cgi_Query{
                $Config{'methods'}{'auth'}{'remote'}{'cgi'}{'username'}
            } ) )

    with

            # perltidy -wn -wnxl='^K( {'
            if ( defined(
                $_Cgi_Query{ $Config{'methods'}{'auth'}{'remote'}{'cgi'}
                      {'username'} }
            ) )

    The first case does maximum welding. In the second case the leading paren is retained by the rule (it would have been rejected if preceded by a non-keyword) but the curly brace is rejected by the rule.

    Here are some additional example strings and their meanings:

     '^('   - the weld must not start with a paren
     '.('   - second and later tokens may not be parens
     '.w('  - second and later tokens may not be a keyword or call parens
     '('    - no parens in a weld
     '^K('  - exclude a leading paren preceded by a non-keyword
     '.k('  - exclude a secondary paren preceded by a keyword
     '[ {'  - exclude all brackets and braces
     '[ ( ^K{' - exclude all except nested structures like do {{  ... }}

Vertical tightness of non-block curly braces, parentheses, and square brackets.
    These parameters control what shall be called vertical tightness. Here are the main points:

    •   Opening tokens (except for block braces) are controlled by -vt=n, or --vertical-tightness=n, where

         -vt=0 always break a line after opening token (default).
         -vt=1 do not break unless this would produce more than one
                 step in indentation in a line.
         -vt=2 never break a line after opening token

    •   You must also use the -lp (--line-up-parentheses) flag when you use the -vt flag; the reason is explained below.

    •   Closing tokens (except for block braces) are controlled by -vtc=n, or --vertical-tightness-closing=n, where

         -vtc=0 always break a line before a closing token (default),
         -vtc=1 do not break before a closing token which is followed
                by a semicolon or another closing token, and is not in
                a list environment.
         -vtc=2 never break before a closing token.
         -vtc=3 Like -vtc=1 except always break before a closing token
                if the corresponding opening token follows an = or =>.

        The rules for -vtc=1 and -vtc=3 are designed to maintain a reasonable balance between tightness and readability in complex lists.

    •   Different controls may be applied to different token types, and it is also possible to control block braces; see below.

    •   Finally, please note that these vertical tightness flags are merely hints to the formatter, and it cannot always follow them. Things which make it difficult or impossible include comments, blank lines, blocks of code within a list, and possibly the lack of the --line-up-parentheses parameter. Also, these flags may be ignored for very small lists (2 or 3 lines in length).

    Here are some examples:

        # perltidy -lp -vt=0 -vtc=0
        %romanNumerals = (
                           one   => 'I',
                           two   => 'II',
                           three => 'III',
                           four  => 'IV',
        );

        # perltidy -lp -vt=1 -vtc=0
        %romanNumerals = ( one   => 'I',
                           two   => 'II',
                           three => 'III',
                           four  => 'IV',
        );

        # perltidy -lp -vt=1 -vtc=1
        %romanNumerals = ( one   => 'I',
                           two   => 'II',
                           three => 'III',
                           four  => 'IV', );

        # perltidy -vtc=3
        my_function(
            one   => 'I',
            two   => 'II',
            three => 'III',
            four  => 'IV', );

        # perltidy -vtc=3
        %romanNumerals = (
            one   => 'I',
            two   => 'II',
            three => 'III',
            four  => 'IV',
        );

    In the last example for -vtc=3, the opening paren is preceded by an equals so the closing paren is placed on a new line.

    The difference between -vt=1 and -vt=2 is shown here:

      # perltidy -lp -vt=1
      $init->add(
                  mysprintf( "(void)find_threadsv(%s);",
                             cstring( $threadsv_names[ $op->targ ] )
                  )
      );

      # perltidy -lp -vt=2
      $init->add( mysprintf( "(void)find_threadsv(%s);",
                             cstring( $threadsv_names[ $op->targ ] )
                  )
      );

    With -vt=1, the line ending in "add(" does not combine with the next line because the next line is not balanced. This can help with readability, but -vt=2 can be used to ignore this rule.

    The tightest, and least readable, code is produced with both "-vt=2" and "-vtc=2":

      # perltidy -lp -vt=2 -vtc=2
      $init->add( mysprintf( "(void)find_threadsv(%s);",
                             cstring( $threadsv_names[ $op->targ ] ) ) );

    Notice how the code in all of these examples collapses vertically as -vt increases, but the indentation remains unchanged. This is because perltidy implements the -vt parameter by first formatting as if -vt=0, and then simply overwriting one output line on top of the next, if possible, to achieve the desired vertical tightness. The -lp (--line-up-parentheses) indentation style has been designed to allow this vertical collapse to occur, which is why it is required for the -vt parameter.

    The -vt=n and -vtc=n parameters apply to each type of container token. If desired, vertical tightness controls can be applied independently to each of the closing container token types.

    The parameters for controlling parentheses are -pvt=n or --paren-vertical-tightness=n, and -pvtc=n or --paren-vertical-tightness-closing=n.

    Likewise, the parameters for square brackets are -sbvt=n or --square-bracket-vertical-tightness=n, and -sbvtc=n or --square-bracket-vertical-tightness-closing=n.

    Finally, the parameters for controlling non-code block braces are -bvt=n or --brace-vertical-tightness=n, and -bvtc=n or --brace-vertical-tightness-closing=n.

    In fact, the parameter -vt=n is actually just an abbreviation for -pvt=n -bvt=n sbvt=n, and likewise -vtc=n is an abbreviation for -pvtc=n -bvtc=n -sbvtc=n.

-bbvt=n or --block-brace-vertical-tightness=n
    The -bbvt=n flag is just like the -vt=n flag but applies to opening code block braces.

     -bbvt=0 break after opening block brace (default).
     -bbvt=1 do not break unless this would produce more than one
             step in indentation in a line.
     -bbvt=2 do not break after opening block brace.

    It is necessary to also use either -bl or -bli for this to work, because, as with other vertical tightness controls, it is implemented by simply overwriting a line ending with an opening block brace with the subsequent line. For example:

        # perltidy -bli -bbvt=0
        if ( open( FILE, "< $File" ) )
          {
            while ( $File = <FILE> )
              {
                $In .= $File;
                $count++;
              }
            close(FILE);
          }

        # perltidy -bli -bbvt=1
        if ( open( FILE, "< $File" ) )
          { while ( $File = <FILE> )
              { $In .= $File;
                $count++;
              }
            close(FILE);
          }

    By default this applies to blocks associated with keywords if, elsif, else, unless, for, foreach, sub, while, until, and also with a preceding label. This can be changed with the parameter -bbvtl=string, or --block-brace-vertical-tightness-list=string, where string is a space-separated list of block types. For more information on the possible values of this string, see "Specifying Block Types"

    For example, if we want to just apply this style to "if", "elsif", and "else" blocks, we could use "perltidy -bli -bbvt=1 -bbvtl='if elsif else'".

    There is no vertical tightness control for closing block braces; with one exception they will be placed on separate lines. The exception is that a cascade of closing block braces may be stacked on a single line. See --stack-closing-block-brace.

-sot,  --stack-opening-tokens and related flags
    The -sot flag tells perltidy to "stack" opening tokens when possible to avoid lines with isolated opening tokens.

    For example:

        # default
        $opt_c = Text::CSV_XS->new(
            {
                binary       => 1,
                sep_char     => $opt_c,
                always_quote => 1,
            }
        );

        # -sot
        $opt_c = Text::CSV_XS->new( {
                binary       => 1,
                sep_char     => $opt_c,
                always_quote => 1,
            }
        );

    For detailed control of individual closing tokens the following controls can be used:

      -sop  or --stack-opening-paren
      -sohb or --stack-opening-hash-brace
      -sosb or --stack-opening-square-bracket
      -sobb or --stack-opening-block-brace

    The flag -sot is an abbreviation for -sop -sohb -sosb.

    The flag -sobb is an abbreviation for -bbvt=2 -bbvtl='*'. This will cause a cascade of opening block braces to appear on a single line, although this an uncommon occurrence except in test scripts.

-sct,  --stack-closing-tokens and related flags
    The -sct flag tells perltidy to "stack" closing tokens when possible to avoid lines with isolated closing tokens.

    For example:

        # default
        $opt_c = Text::CSV_XS->new(
            {
                binary       => 1,
                sep_char     => $opt_c,
                always_quote => 1,
            }
        );

        # -sct
        $opt_c = Text::CSV_XS->new(
            {
                binary       => 1,
                sep_char     => $opt_c,
                always_quote => 1,
            } );

    The -sct flag is somewhat similar to the -vtc (--vertical-tightness-closing flags, and in some cases it can give a similar result. The difference is that the -vtc flags try to avoid lines with leading opening tokens by "hiding" them at the end of a previous line, whereas the -sct flag merely tries to reduce the number of lines with isolated closing tokens by stacking them but does not try to hide them. For example:

        # -vtc=2
        $opt_c = Text::CSV_XS->new(
            {
                binary       => 1,
                sep_char     => $opt_c,
                always_quote => 1, } );

    For detailed control of the stacking of individual closing tokens the following controls can be used:

      -scp  or --stack-closing-paren
      -schb or --stack-closing-hash-brace
      -scsb or --stack-closing-square-bracket
      -scbb or --stack-closing-block-brace

    The flag -sct is an abbreviation for stacking the non-block closing tokens, -scp -schb -scsb.

    Stacking of closing block braces, -scbb, causes a cascade of isolated closing block braces to be combined into a single line as in the following example:

        # -scbb:
        for $w1 (@w1) {
            for $w2 (@w2) {
                for $w3 (@w3) {
                    for $w4 (@w4) {
                        push( @lines, "$w1 $w2 $w3 $w4\n" );
                    } } } }

    To simplify input even further for the case in which both opening and closing non-block containers are stacked, the flag -sac or --stack-all-containers is an abbreviation for --stack-opening-tokens --stack-closing-tokens.

    Please note that if both opening and closing tokens are to be stacked, then the newer flag --weld-nested-containers may be preferable because it insures that stacking is always done symmetrically. It also removes an extra level of unnecessary indentation within welded containers. It is able to do this because it works on formatting globally rather than locally, as the --stack-opening-tokens and --stack-closing-tokens flags do.

  Breaking Before or After Operators
Four command line parameters provide some control over whether a line break should be before or after specific token types. Two parameters give detailed control:

-wba=s or --want-break-after=s, and

-wbb=s or --want-break-before=s.

These parameters are each followed by a quoted string, s, containing a list of token types (separated only by spaces). No more than one of each of these parameters should be specified, because repeating a command-line parameter always overwrites the previous one before perltidy ever sees it.

By default, perltidy breaks after these token types:
  % + - * / x != == >= <= =~ !~ < > | &
  = **= += *= &= <<= &&= -= /= |= >>= ||= //= .= %= ^= x=

And perltidy breaks before these token types by default:
  . << >> -> && || //

To illustrate, to cause a break after a concatenation operator, '.', rather than before it, the command line would be

  -wba="."

As another example, the following command would cause a break before math operators '+', '-', '/', and '*':

  -wbb="+ - / *"

These commands should work well for most of the token types that perltidy uses (use --dump-token-types for a list). Also try the -D flag on a short snippet of code and look at the .DEBUG file to see the tokenization. However, for a few token types there may be conflicts with hardwired logic which cause unexpected results. One example is curly braces, which should be controlled with the parameter --opening-brace-on-new-line provided for that purpose.

WARNING Be sure to put these tokens in quotes to avoid having them misinterpreted by your command shell.

Two additional parameters are available which, though they provide no further capability, can simplify input are:

-baao or --break-after-all-operators,

-bbao or --break-before-all-operators.

The -baao flag sets the default to be to break after all of the following operators:

    % + - * / x != == >= <= =~ !~ < > | & ^ |. &. ^.
    = **= += *= &= <<= &&= -= /= |= >>= ||= //= .= %= ^= x= |.= &.= ^.=
    . : ? && || and or err xor

and the -bbao flag sets the default to break before all of these operators. These can be used to define an initial break preference which can be fine-tuned with the --want-break-after and --want-break-before flags. For example, to break before all operators except an = one could use "-bbao -wba='='" rather than listing every single perl operator except = on a -wbb flag.

-bal=n, --break-after-labels=n
    This flag controls whether or not a line break occurs after a label. There are three possible values for n:

      -bal=0  break if there is a break in the input [DEFAULT]
      -bal=1  always break after a label
      -bal=2  never break after a label

    For example,

          # perltidy -bal=1
          RETURN:
            return;

          # perltidy -bal=2
          RETURN: return;

  Controlling List Formatting
Perltidy attempts to format lists of comma-separated values in tables which look good. Its default algorithms usually work well, but sometimes they don't. In this case, there are several methods available to control list formatting.

A very simple way to prevent perltidy from changing the line breaks within a comma-separated list of values is to insert a blank line, comment, or side-comment anywhere between the opening and closing parens (or braces or brackets). This causes perltidy to skip over its list formatting logic. (The reason is that any of these items put a constraint on line breaks, and perltidy needs complete control over line breaks within a container to adjust a list layout). For example, let us consider

    my @list = (1,
                1, 1,
                1, 2, 1,
                1, 3, 3, 1,
                1, 4, 6, 4, 1,);

The default formatting, which allows a maximum line length of 80, will flatten this down to one line:

    # perltidy (default)
    my @list = ( 1, 1, 1, 1, 2, 1, 1, 3, 3, 1, 1, 4, 6, 4, 1, );

This formatting loses the nice structure. The original line breaks can be retained by adding comment or a blank line somewhere between the two parens. For example,

  my @list = (
      1,    # a side comment forces the original breakpoints to be kept
      1, 1,
      1, 2, 1,
      1, 3, 3, 1,
      1, 4, 6, 4, 1,
  );

We could achieve the same result with a blank line or full comment anywhere between the opening and closing parens. Vertical alignment of the list items will still occur if possible. The blank line method is shown here:

    my @list = (

        1,
        1, 1,
        1, 2, 1,
        1, 3, 3, 1,
        1, 4, 6, 4, 1,
    );

For another possibility see the -fs flag in "Skipping Selected Sections of Code".

-boc,  --break-at-old-comma-breakpoints
    The -boc flag is another way to prevent comma-separated lists from being reformatted. Using -boc on the above example, plus additional flags to retain the original style, yields

        # perltidy -boc -lp -pt=2 -vt=1 -vtc=1
        my @list = (1,
                    1, 1,
                    1, 2, 1,
                    1, 3, 3, 1,
                    1, 4, 6, 4, 1,);

    A disadvantage of this flag compared to the methods discussed above is that all tables in the file must already be nicely formatted. The parameter of the next section can be used to limit the tables to which it applies.

-boct=s,  --break-at-old-comma-types=s
    This parameter can be used to make the -boc flag of the previous section apply only to commas in certain types of containers. The parameter string s is a space-separated list of the types of containers. It may include any of the list container tokens (, {, and [. In addition, a paren token may be preceded by any of the letters 'k', 'K', 'f', 'F', 'w', and 'W', to further restrict the types of parens to which -boc applies (see "Specifying Paren Types").

    For example:

        -boct='('  means keep old comma breaks in paren lists
        -boct='f(' means keep old comma breaks in function call lists

    Commas which are not contained within one of the three list container types, such as those in a paren-less function call, can be selected with a ';' character. And multiple selections should be separated with spaces.

    For example, -boct='; (' means keep breaks at uncontained commas and at commas in parens.

    Note that this parameter has no effect unless -break-at-old-comma-breakpoints, or -boc, is also set.

-btct=s,  --break-at-trailing-comma-types=s
    A trailing comma is an optional comma following the last item of a list. The -btct=s tells perltidy to end a line at selected trailing commas. The string s selects the trailing commas, as follows:

      s=1 or '*' : every trailing comma
      s=m a trailing comma in a multiline list
      s=b a bare trailing comma
      s=0 none

    For example, given the following input

            $w->bind(
                '<Page_Down>' => xx,
            );

    The default formatting would flatten this into a single line. But the container can be kept open with

            # perltidy -btct='b'
            $w->bind(
                '<Page_Down>' => xx,
            );

    This can be particularly useful for short function calls like this, where the default perltidy formatting does not keep the container open.

    The options s=m and s=1 can be used to open up containers with non-bare trailing commas. For example, given this input

            $w->bind( '<Page_Down>' => xx, );

    we can break it open with

            # perltidy -btct=1
            $w->bind(
                '<Page_Down>' => xx,
            );

    Afterwards, we could switch to -btct='b' since the trailing comma is now bare. But the -btct parameter must be retained in this case because otherwise this small list will be flattened the next time it is formatted.

    This logic can be restricted to specific container types by including an opening token ahead of the letter in the above table. For example

        -btct='(b'

    means that this operation should only apply to bare trailing commas within parentheses.

    For parentheses, an additional item of information which can be given is an alphanumeric letter which is used to limit the selection further depending on the type of token immediately before the opening paren. The possible letters are currently 'k', 'K', 'f', 'F', 'w', and 'W', with these meanings for matching whatever precedes an opening paren (see "Specifying Paren Types"):

     'k' matches if the previous nonblank token is a perl keyword
         (such as 'if', 'while'),
     'K' matches if 'k' does not: previous token is not a keyword
     'f' matches if previous token is a function (not a keyword)
     'F' matches if 'f' does not.
     'w' matches if either 'k' or 'f' match.
     'W' matches if 'w' does not.

    These are the same codes used for --line-up-parentheses-inclusion-list. For example,

        -btct='f(b'

    means that bare trailing commas in function call lists in the input stream should be followed by line breaks in the formatted output stream.

    The section "Adding and Deleting Commas" describes additional controls for working with trailing commas. These can be combined with the -break-trailing-comma-types parameter for additional control of list formatting.

-bocp=s,  --break-open-compact-parens=s
    When list contained in parentheses is too long to display on a single line, but short enough to display on two lines, then the default is to display it compactly on two lines. If more than two lines are required, then the default is to put line breaks after the opening paren and before the closing paren. For example, the following short list is displayed with the default formatting:

        initialize_warn_variable_types( $wvt_in_args, $num_files,
            $line_range_clipped );

    The parameter -bocp=s can be used to cause short lists like this to be broken open in the same way as longer lists. The parameter s is a single letter which indicates the types of parentheses to which this applies. This letter may be one of the following (see "Specifying Paren Types"):

     '1' or '*' matches all parens
     'k' matches if the previous nonblank token is a perl keyword
         (such as 'my', 'return'),
     'K' matches if 'k' does not: previous token is not a keyword
     'f' matches if previous token is a function (not a keyword)
     'F' matches if 'f' does not.
     'w' matches if either 'k' or 'f' match.
     'W' matches if 'w' does not.
     '0' deactivates this parameter [DEFAULT]

    In this case, the most useful of these are f (function), k (keyword), and w (both).

    So to illustrate:

        # perltidy -bocp='f'
        initialize_warn_variable_types(
            $wvt_in_args, $num_files, $line_range_clipped
        );

-mft=s,  --maximum-fields-per-table=s
    Perltidy will use special formatting rules for lists are relatively small, irregular, or associated with certain keywords such as "sprintf". In other words, for data which may not display well as a table. For other lists it will make a table with a certain number of fields n which is computed to fit the page width and the data. This number n can be controlled with this input parameter.

    If s is a positive number n, and the computed number of fields for a table exceeds n, then it will be reduced to n. This parameter might be used, for example, on a small section of code to force a list to have a particular number of fields per line, and then either the -boc flag could be used to retain this formatting, or a blank line or comment could be introduced somewhere to freeze the formatting in future applications of perltidy. For example,

        # perltidy -mft=2
        @month_of_year = (
            'Jan', 'Feb',
            'Mar', 'Apr',
            'May', 'Jun',
            'Jul', 'Aug',
            'Sep', 'Oct',
            'Nov', 'Dec'
        );

    The default value is n=0, which does not place a limit on the number of fields in a table.

    Starting with perltidy version 20250311.05, an optional more general input parameter allows some selection of the tables to which this option applies. The integer n may be preceded by one of the container types "(", "[", or "{" to selected just that type of container. Different numerical values may be assigned to different container types. For example, the input

        -mft='(1 [2'

    would mean use 1 field for tables within parens, 2 fields for tables within square brackets, and do not control the fields within curly braces.

    In addition, parens may be preceded by one of the paren control letters "k f w K F W" to further limit the tables for which the number of fields will be controlled (see the table above or "Specifying Paren Types"). One use for this would be to match the control of the number of fields of a table with the parameter --break-open-compact-parens described above. Thus the combination

       -bocp='f' -mft='f(1'

    says that paren lists following function calls should be broken open, and these same lists should have 1 field per line when formatted as a table.

-cab=n,  --comma-arrow-breakpoints=n
    A comma which follows a comma arrow, '=>', is given special consideration. In a long list, it is common to break at all such commas. This parameter can be used to control how perltidy breaks at these commas. (However, it will have no effect if old comma breaks are being forced because -boc is used). The possible values of n are:

     n=0 break at all commas after =>
     n=1 stable: break at all commas after => if container is open,
         EXCEPT FOR one-line containers
     n=2 break at all commas after =>, BUT try to form the maximum
         one-line container lengths
     n=3 do not treat commas after => specially at all
     n=4 break everything: like n=0 but ALSO break a short container with
         a => not followed by a comma when -vt=0 is used
     n=5 stable: like n=1 but ALSO break at open one-line containers when
         -vt=0 is used (default)

    For example, given the following single line, perltidy by default will not add any line breaks because it would break the existing one-line container:

        bless { B => $B, Root => $Root } => $package;

    Using -cab=0 will force a break after each comma-arrow item:

        # perltidy -cab=0:
        bless {
            B    => $B,
            Root => $Root
        } => $package;

    If perltidy is subsequently run with this container broken, then by default it will break after each '=>' because the container is now broken. To reform a one-line container, the parameter -cab=2 could be used.

    The flag -cab=3 can be used to prevent these commas from being treated specially. In this case, an item such as "01" => 31 is treated as a single item in a table. The number of fields in this table will be determined by the same rules that are used for any other table. Here is an example.

        # perltidy -cab=3
        my %last_day = (
            "01" => 31, "02" => 29, "03" => 31, "04" => 30,
            "05" => 31, "06" => 30, "07" => 31, "08" => 31,
            "09" => 30, "10" => 31, "11" => 30, "12" => 31
        );

-qwaf,  --qw-as-function
    This option tells perltidy to format a qw list which is delimited with parentheses as if it were a function call whose call args are a list of quoted items. Normally, a qw list is output verbatim except for an adjustment of leading whitespace to indicate the indentation level. For example, here is an example of the default formatting of a poorly formatted qw list:

        # perltidy
        @fields = qw( $st_dev     $st_ino    $st_mode $st_nlink   $st_uid
          $st_gid $st_rdev    $st_size $st_atime   $st_mtime  $st_ctime
          $st_blksize $st_blocks);

    If we format with -qwaf then the result will be:

        # perltidy -qwaf
        @fields = qw(
            $st_dev   $st_ino   $st_mode  $st_nlink
            $st_uid   $st_gid   $st_rdev  $st_size
            $st_atime $st_mtime $st_ctime $st_blksize
            $st_blocks
        );

    The way this works is that just before formatting begins, the tokens of the qw text are replaced with the tokens of an equivalent function call with a comma-separated list of quoted items as call args. Then it is formatted like any other list. Special comma tokens are employed which have no display text, so when the code is eventually displayed it remains a valid qw quote.

    Some things to note are:

    •   This only works for qw quotes which begin with qw(, with no space before the paren.

    •   If the option --space-function-paren is employed, it is ignored for these special function calls because it would deactivate them.

    •   Otherwise the various formatting control flags operate on these lists the same as for other comma-separated lists. In particular, note that if --break-at-old-comma-breakpoints, or -boc, is set, then the old line break locations will be retained. And old line breaks will be retained if there are any blank lines between the opening and closing parens.

    •   Before using this option for the first time, it is a good idea to scan the code and decide if any lists have a special order which should be retained. This can be accomplished for example by changing the quote delimiters to something other than parens, or by inserting a blank line as discussed at the start of this section.

  Adding and Deleting Commas

-drc,  --delete-repeated-commas
    This option causes repeated commas to be removed. For example, given this list with a repeated comma

          ignoreSpec( $file, "file",, \%spec, \%Rspec );

    we can remove it with -drc

          # perltidy -drc:
          ignoreSpec( $file, "file", \%spec, \%Rspec );

    This parameter also deletes repeated fat commas, '=>'. The complete list of actions taken when this flag is set are as follows:

    •   Repeated commas like ',,' are removed with a warning.

    •   Repeated fat commas like '=> =>' are removed with a warning.

    •   The combination '=>,' produces a warning but is not changed (it is likely an error but only its author would know how to fix it).

    •   The remaining combination ',=>' (sometimes called a 'winking fat comma') is ignored by this parameter.

    •   These warnings are only output if the --warning-output, or -w, flag is set.

    This option is on by default. Use -ndrc to turn it off.

Adding and Deleting Trailing Commas
    A trailing comma is a comma following the last item of a list. Perl allows trailing commas but they are not required. Including them can sometimes simplify the maintenance of large or complex lists, and help display structure. But they may not be appropriate in all lists, for example in a list which always has just one term. By default, perltidy does not add or delete trailing commas, but it is possible to manipulate them with the following set of related parameters:

    •   --want-trailing-commas=s, -wtc=s - defines where trailing commas are wanted (the style)

    •   --add-trailing-commas, -atc - gives permission to add trailing commas to match the style wanted

    •   --delete-trailing-commas, -dtc - gives permission to delete trailing commas which do not match the style wanted

    The parameter --want-trailing-commas=s, or -wtc=s, defines a preferred style. The string s indicates which lists should get trailing commas, as follows:

     s=1 or '*' : every list
     s=m a multiline list
     s=b a multiline list, bare trailing comma
     s=i a multiline list, bare trailing comma, about one comma per line
     s=h a multiline list, bare trailing comma, about one key=>value
           pair per line
     s=0 : no list

     s=' ' or not defined : leave trailing commas unchanged [DEFAULT]

    where:

    •   A list here is basically taken to be a container of items (parens, square brackets, or braces), which is not a code block, which contains one or more commas or fat commas. These parameters only apply to something that fits this definition of a list.

        A paren-less list of parameters is not a list by this definition, so these parameters do not apply to a paren-less list.

    •   A multiline list is a list for which the opening and closing brackets on different lines.

    •   A bare trailing comma is a comma which is at the end of a line. That is, the closing container token follows on a different line. So a list with a bare trailing comma is a special case of a multiline list.

    •   In fact the above options for trailing commas can be seen as a hierarchy of nesting sets which can be expressed as

           1 > m > b > i > h > 0

        This indicates that multiline trailing commas m are a subset of all trailing commas, and bare trailing commas b are a subset of all multiline trailing commas, and so on.

    This parameter by itself only indicates where trailing commas are wanted. Perltidy only adds these trailing commas if permission is granted by setting the flag --add-trailing-commas, or -atc. And perltidy only removes unwanted trailing commas if the flag --delete-trailing-commas, or -dtc is set.

    Here are some example parameter combinations and their meanings

     -wtc=0 -dtc   : delete all trailing commas
     -wtc=1 -atc   : add trailing commas to all lists
     -wtc=m -atc   : add trailing commas to all multiline lists
                     (single line lists remain unchanged)
     -wtc=b -atc   : add commas so that all lists whose closing
                     bracket starts a new line have trailing commas
     -wtc=b -dtc   : all trailing commas which are not bare
                     (not followed by a newline) get deleted.
     -wtc=b -atc -dtc  : do both of the above operations so that
                         all trailing commas are bare

    For example, given the following input

        $wine_list = $top->Box(
            "-length" => 5,
            "-width"  => 3
        )->select( "red", "white", "gold", );

    we have

        # perltidy -wtc=b -atc -dtc
        $wine_list = $top->Box(
            "-length" => 5,
            "-width"  => 3,
        )->select( "red", "white", "gold" );

    A comma was added after the 3, since it is bare, and a comma was removed after "gold", since it not bare.

    It is possible to apply a different style to each type of container token by including an opening token ahead of the style character in the above table. For example

        -wtc='(m [b'

    means that lists within parens should have multiline trailing commas, and that lists within square brackets have bare trailing commas. Since there is no specification for curly braces in this example, their trailing commas would remain unchanged.

    For parentheses, an additional item of information which can be given is an alphanumeric letter which is used to limit the selection further depending on the type of token immediately before the opening paren. The possible letters are currently 'k', 'K', 'f', 'F', 'w', and 'W', with these meanings for matching whatever precedes an opening paren (see "Specifying Paren Types"):

     'k' matches if the previous nonblank token is a perl keyword
         (such as 'if', 'while'),
     'K' matches if 'k' does not: previous token is not a keyword
     'f' matches if previous token is a function (not a keyword)
     'F' matches if 'f' does not.
     'w' matches if either 'k' or 'f' match.
     'W' matches if 'w' does not.

    These are the same codes used for --line-up-parentheses-inclusion-list. For example,

      -wtc='w(m'

    means that trailing commas are wanted for multiline parenthesized lists following a function call or keyword.

    Finally, a leading + can be placed on any term to indicate that it only applies when adding commas. A leading - indicates that it only applies when deleting commas. For example,

      -wtc='+h -b' -atc -dtc

    means that missing trailing commas should be added to lists of key => value pairs, and trailing commas which are not bare should be removed. No other changes are made. When both plus and minus terms are used like this, they must not be in conflict. There is no conflict in this example because the trailing comma locations of the key=>value pairs selected by the +h term are a subset of all bare trailing commas, and thus will not be deleted by the -b term. The general rule is that the letter of the plus term should occur after the letter of the minus term in the hierarchical nesting order, 1 > m > b > i > h > 0.

    Some points to note regarding adding and deleting trailing commas:

    •   It is recommended to also use the --converge parameter when adding and/or deleting trailing commas, especially if the formatter may be making other line break changes at the same time. The reason is that the decision regarding whether or not a list is multiline or bare is made based on the input stream if only one iteration is made, which is the default.

        When iterations are requested with the --converge parameter, any comma deletion operations are postponed until the start of the second iteration, after most changes in line breaks have been made.

        To illustrate, if we start with

                f(
                    a => 1,
                    b => 2, );

        and attempt to delete non-bare commas,

                # perltidy -wtc=b -dtc
                f(
                    a => 1,
                    b => 2
                );

        we delete a comma which has become bare, which is not what is wanted. This happened because the change was based on the starting rather than the final line breaks. Running with --converge gives the desired result:

                # perltidy -wtc=b -dtc --converge
                f(
                    a => 1,
                    b => 2,
                );

        because comma changes are based on the line breaks after the first iteration.

        A parameter --delay-trailing-comma-operations, or -dtco, is available to control this behavior if desired. Negating this parameter, with -ndtco, tells perltidy to always use the starting state to make decisions regarding comma addition and deletion, even when iterations are requested. This should not normally be necessary.

    •   Perltidy does not add a trailing comma in some edge cases which appear to be near a stability limit. So if a comma is unexpectedly not added, this is probably the reason.

    •   If the parameter --break-at-trailing-comma-types, or -btct. is also employed, it operates on the state after any adding or deleting of commas. And it will allow trailing commas to be added in most edge cases. For example, given the following input text

            plot(
                'g', Canvas => $overview_canvas
            );

        formatting with "-wtc=f(b) -atc" will not add a trailing comma because the list will be flattened and the comma will not remain bare. But we can add a trailing comma, and keep the container open, with

            # perltidy -wtc='f(b' -atc -btct='f(b'
            plot(
                'g', Canvas => $overview_canvas,
            );

        As another example, given the same text on a single line without a trailing comma

            plot( 'g', Canvas => $overview_canvas );

        we can add a trailing comma and break the container open with

            # perltidy -wtc=1 -atc -btct=1
            plot(
                'g', Canvas => $overview_canvas,
            );

        After that, we could use "-btct='f(b'" to keep the container open.

    •   When using these parameters for the first time it is a good idea to practice on some test scripts and verify that the results are as expected.

    Special Considerations for Lone Trailing Commas

    Adding or deleting the only comma in a list can have some implications which need to be explained and possibly controlled. Two additional controls are available for these lone commas:

    •   --add-lone-trailing-commas, -altc - gives permission to add a comma if it will be the only comma. This is on by default and explained below.

    •   --delete-lone-trailing-commas, -dltc - gives permission to delete the only comma in a list. This is on by default and explained below.

    One issue with deleting a lone comma is that if it is deleted, then it might not be possible add it back automatically since perltidy uses the existence of commas to help locate containers where commas are appropriate. For example, given

        my ( $self, ) = @_;

    and if we remove the comma with

        # perltidy -wtc=m -dtc
        my ( $self ) = @_;

    then we cannot use the trailing comma controls to add this comma back. The parameter --delete-lone-trailing-commas allows such a comma to be deleted, and is on by default, but can be turned off to prevent this. This might be useful if one is experimenting with formatting options and wants to restrict testing to operations which are reversible. Note that this parameter is a fine-tuning control for --delete-trailing-commas which must also be set for it to have any effect.

    However, if a single item in a list is itself is a list with multiple lines, such as the item in braces here

        $self->make_grammar(
            {
                iterator => $self->_iterator,
                parser   => $self,
            }
        );

    then perltidy can add and/or delete a lone comma:

        # perltidy -atc -wtc=b
        $self->make_grammar(
            {
                iterator => $self->_iterator,
                parser   => $self,
            },
        );

    But it turns out that these cases usually coincide with situations where the --weld-nested-containers, or -wn, parameter would apply, and adding such commas can block welding. For example, the -wn parameter would succeed on the first of the above snippets, but it would fail on the second because of the added trailing comma.

    The parameter --add-lone-trailing-commas, or -altc allows these commas to be added, provide that --add-trailing-commas is also set. It is on by default. Users of -wn may want to turn it off with --noadd-lone-trailing-commas, -naltc to prevent such commas from being added.

    If such commas do get added, then can be removed to allow welding with the control described in the next section.

-dwic,  --delete-weld-interfering-commas
    If the closing tokens of two nested containers are separated by a comma, then welding requested with --weld-nested-containers cannot occur. Any commas in this situation are optional trailing commas and can be removed with -dwic. For example, a comma in this script prevents welding:

        # perltidy -wn
        $self->make_grammar(
            {
                iterator => $self->_iterator,
                parser   => $self,
            },
        );

    Adding -dwic removes the comma and allows welding:

        # perltidy -wn -dwic
        $self->make_grammar( {
            iterator => $self->_iterator,
            parser   => $self,
        } );

    This feature is off by default. Here are some points to note about the -dwic parameter

    •   This operation is not always reversible, so please check results of using this parameter carefully.

    •   Removing this type of isolated trailing comma is necessary for welding to be possible, but not sufficient. So welding will not always occur where these commas are removed.

    •   This operation is independent of --add-trailing-commas and --delete-trailing-commas. If it conflicts with any of those settings, it has priority.

  Adding and Deleting Interbracket Arrows
In the following expression, the arrow operator '->' between the closing and opening brackets of hash keys and array indexes are optional:

   return $self->{'commandline'}->{'args'}->[0]->[0]->{'hgroups'};

These will be called interbracket arrows here, for lack of a better term. Perltidy will not change them by default, but they can be added or removed with the following parameters.

-dia,  --delete-interbracket-arrows
    This parameter deletes interbracket arrows. Applied to the above example we have

        # perltidy -dia
        return $self->{'commandline'}{'args'}[0][0]{'hgroups'};

    By default this applies to all interbracket arrows, but selective deletion is possible with controls described below.

-aia,  --add-interbracket-arrows
    This parameter adds interbracket arrows. Applied to the line of code above, we get back the original line.

        # perltidy -aia
        return $self->{'commandline'}->{'args'}->[0]->[0]->{'hgroups'};

    Selective changes can be made with controls described below.

-ias=s,  --interbracket-arrow-style=s
    By default the -add- and -delete- parameters apply to all interbracket arrows.

    An optional style can be specified with this parameter string s. In that case the parameters --add-interbracket-arrows and --delete-interbracket-arrows only apply where they would bring the formatting into agreement with the specified style. They may both be used in a single run if a mixed style is specified since there is no conflict.

    The style string s gives a graphical description of the desired style. It lists up to four possible pairs of bracket types with an optional arrow between them. For example:

       -ias='][   }->{'

    This means no arrows are wanted between '][' but arrows should be between '}{'. And it means that the unlisted pairs ']{' and '}[' should remain unchanged, either with or without arrows.

    In this particular example, if the parameter --delete-interbracket-arrows is used, then only arrows like ']->[' will be deleted, since they are the only ones which disagree with the style.

    And likewise, if --add-interbracket-arrows is used, then arrows will only be inserted between brackets like '}{' to bring the formatting into conformity with the style in this example.

    Spaces in the string s are optional. They are ignored when the expression is parsed.

    The style corresponding to all possible arrows is

          -ias=']->[ ]->{ }->[ }->{'

    For convenience, this may also be requested with -ias=1 or -ias='*'.

    The style corresponding to no interbracket arrows is

          -ias=']  [ ]  { }  [ }  {'

    which may also be requested with -ias=0.

-wia,  --warn-interbracket-arrows
    If this parameter is set, then a message is written to the error file in the following cases:

    •   If an arrow is added or deleted by an add or delete command.

    •   If a style is defined and an arrow would have been added or deleted if requested. So for example, the command

           perltidy -wia -ias=']['

        will show where a file has arrows like ]->[' since they do not match the style, but no changes will be made because the delete command -dia has not been given. And

           perltidy -wia -ias=0

        will warn if any arrows exist, since the flag -ias=0 means that no arrows are wanted.

-iac=n,  --interbracket-arrow-complexity=n
    This parameter makes it possible to skip adding or deleting arrows following a container which is complex in some sense. Three levels of complexity can be specified with the integer n, as follows:

     n=0  the left container must contain a single thing (token)
     n=1  the left container must not contain other containers [DEFAULT]
     n=2  the left container may contain anything

    Some examples:

     # Container               complexity
     {'commandline'}           0 single token         OK by default
     { $type . $name }         1 multiple tokens      OK by default
     [ $plot{'x-axis'} - 1 ]   2 contains a container SKIPPED by default

    So, with the default complexity level of 1, an arrow could be added or deleted following the first two of these containers but not the third.

Some points to consider when working with these parameters are:

•   There are no known bugs, but this is a relatively new feature. So please carefully check file differences and run tests when interbracket arrows are added or removed.

•   For some unusual spacing parameters, it could take an extra iteration for the spaces between brackets to reach their final state after arrows are added or deleted.

•   Any comments between brackets will prevent the adding and deleting of arrows.

  Manipulating Indented Here-documents
Perl has two types of here-documents, standard and indented. A standard here-document (heredoc) is introduced with the symbol << followed by a (possibly quoted) delimiter string or tag. The lines of here-text follow immediately and are terminated by a line containing just the delimiter string and a newline character.

In Perl v5.26 and later, an indented heredoc can be introduce with the <<~ operator followed by a delimiter string. In this case, the terminating line may have leading whitespace, and this amount of leading whitespace must also appear in the preceding lines of here-text.

Although the actual leading whitespace of indented here documents is arbitrary, a common practice is to use the same leading whitespace as the line which introduces the here document, possibly with a few added spaces of indentation. The following --heredoc- parameters can be used to adjust the leading whitespace of indented heredocs according to rules like this, and also to convert between heredoc types.

--heredoc-indentation-update,  -hiu
    This parameter setting causes the leading whitespace of indented here-documents to be updated to agree with the indentation of the line of code on which they are introduced.

    The additional --heredoc- parameters defined below may be used to add additional spaces, to select just certain heredocs, and to convert between heredoc types.

--heredoc-extra-spaces=s, or -hxs=s
    This parameter allows extra spaces to be added to the leading whitespace, thus indenting the heredoc text. The string parameter s gives the number of additional leading spaces.

    For example -hxs=4 means add four additional spaces to the leading whitespace. The default is no added spaces, which can also be specified with s=0.

    It is further possible to specify a different number of spaces for heredocs which are in blocks of code, and heredocs which are not within blocks of code. This is done by specifying the two integers separated with a semicolon. The first integer applies within blocks, and the second applies within non-blocks. For example, -hxs=0;4 means to use 0 extra spaces within code blocks (where a semicolon could appear) and 4 extra spaces elsewhere (such as within a list). This string expression may include spaces.

    This semicolon format can also be used as a way to prevent selected heredocs from being updated, as follows. If the first integer of this semicolon format is omitted, then heredocs within code blocks will be skipped by these parameters. Likewise, if the second integer is omitted, then heredocs in non-blocks will be skipped. For example, -hxs='0;' means use 0 extra spaces within code blocks, and ignore heredocs which are not in code blocks.

--heredoc-tag-exclusion-pattern=s, or -htxp=s
    This option prevents any of the --heredoc- parameters from operating on heredocs whose tags match the regex pattern string s. For example, -hds='^-' prevents operations by all --heredoc- parameters on tags with leading underscores, such as '_END'.

--heredoc-excess-length-option=n, or -hxlo=n
    The value n of this option is an integer which determines what happens if an indented heredoc would exceed the maximum line length, as follows:

      n=0 leave unchanged [DEFAULT]
      n=1 ignore the line length limit
      n=2 use zero indentation
      n=3 use the maximum without exceeding the limit

--heredoc-convert-to=s, or -hct=s
    This option converts between standard and indented heredocs. The string may contain any of these strings:

      'standard' - convert '<<~' to to '<<' heredocs
      'indented' - convert '<<' to '<<~' heredocs

    Thus -hcs='standard' removes the leading whitespace of indented heredocs and changes the symbol <<~ to be <<. This might be useful for converting a program to run under older versions of perl.

    The option -hcs='indented' by itself just changes the symbol << to <<~. If the master parameter --heredoc-indentation-update is also set, then whitespace will also be added. Otherwise, it will remain zero until the file is formatted with the --heredoc-indentation-update parameter set.

Some notes on these heredoc- parameters
    •   These parameters only apply to here documents which appear in the basic stream of code tokens. They do not apply, for example, to here documents which are first referenced from within regular expressions or quoted strings.

    •   Tab characters may be used in the leading whitespace of indented here documents, but any new leading whitespace created by perltidy will only contain simple space characters, not tabs, even if the user has set the parameter --entab. Using tab characters can cause problems, for example, when the text is operated on by an editor, especially if the here-text itself has additional leading whitespace.

    •   Indented here documents which do not have the same leading whitespace on each line of text as on the ending delimiter will produce an error message and will not be processed by these parameters.

  Missing Else Blocks
A defensive programming technique is to require that every if-elsif- chain be terminated with an else block, even though it is not strictly required. This helps insure that there are no holes in the logic.

For example, consider the following snippet:

    my $type = get_cards();
    if    ( $type = 1 ) { action("hold 'em") }
    elsif ( $type = 2 ) { action("fold 'em") }
    elsif ( $type = 3 ) { action("walk away") }

What if the variable $type is some other value? It might have been obvious that this was okay when the code was first written, but it might not be so clear when the code is reviewed a few years later. A terminal else block with a comment would help clarify things.

The parameters in this section can help by either issuing a warning if an else is missing, or even inserting an empty else block where one is missing, or both.

-wme,  --warn-missing-else
    This flag tells perltidy to issue a warning if a program is missing a terminal else block. The default is not to issue such a warning.

-ame,  --add-missing-else
    This flag tells perltidy to output an empty else block wherever a program is missing a terminal else block. To get a warning when this is done you should also set -wme. The default is not to add missing else blocks.

-amec=s,  --add-missing-else-comment=s
    This string is a side comment which will be written to highlight a new empty else block. The default is:

        -amec='##FIXME - added with perltidy -ame'

For example, on the above example we can add a missing else and also get a warning notice with:

    # perltidy -ame -wme
    my $type = get_cards();
    if    ( $type == 1 ) { action("hold 'em") }
    elsif ( $type == 2 ) { action("fold 'em") }
    elsif ( $type == 3 ) { action("walk away") }
    else {
        ##FIXME - added with perltidy -ame
    }

Any ##FIXME comments created in this way should be reviewed and changed appropriately. For example, one might decide that the code fine as is, and just change the comment to indicate that nothing has been overlooked:

    my $type = get_cards();
    if    ( $type == 1 ) { action("hold 'em") }
    elsif ( $type == 2 ) { action("fold 'em") }
    elsif ( $type == 3 ) { action("walk away") }
    else {
        # ok - no worries
    }

Or maybe a deeper analysis reveals that something was missed:

    my $type = get_cards();
    if    ( $type == 1 ) { action("hold 'em") }
    elsif ( $type == 2 ) { action("fold 'em") }
    elsif ( $type == 3 ) { action("walk away") }
    else                 { action("run") }

Sometimes it turns out that the else block should not reachable, in which case an error exit might be appropriate. In any case, having the else block can improve code maintainability.

  Controlling Breaks at Certain Chain Operators
For a statement which consists of a chain of certain binary operators, the default line break logic is: (1) if a statement fits on one line, then it is formatted as one line, or (2) if the statement requires multiple lines, then a break is made at all of the chain operators. Additional rules apply, but this is the basic one.

The parameter --pack-operator-types=s, or -pot=s, can be used to change this for certain operators which may be specified with the string s. These are the concatenation operator s='.' and the method call arrow s='->'. When this parameter is selected for an operator, no special breaks are made, so there will be a minimal number of line breaks. For example, here is the default formatting for a method call chain which requires multiple lines:

    # perltidy -l=60
    Data::Dumper->new( [ \%errors ] )
      ->Indent(2)
      ->Terse(1)
      ->Sortkeys(1)
      ->Dump;

and this is the alternative formatting with this parameter:

    # perltidy -l=60 -pot='->'
    Data::Dumper->new( [ \%errors ] )->Indent(2)->Terse(1)
      ->Sortkeys(1)->Dump;

Note that this option only applies to arrows which follow a closing paren.

  Retaining or Ignoring Existing Line Breaks
Several additional parameters are available for controlling the extent to which line breaks in the input script influence the output script. In most cases, the default parameter values are set so that, if a choice is possible, the output style follows the input style. For example, if a short logical container is broken in the input script, then the default behavior is for it to remain broken in the output script.

Many of the parameters in this section would only be required for a one-time conversion of a script from short container lengths to longer container lengths. The opposite effect, of converting long container lengths to shorter lengths, can be obtained by temporarily using a short maximum line length.

-iob,  --ignore-old-breakpoints
    This flag is a master switch which tells perltidy to ignore all line breakpoints in the input script to the maximum extend possible. This will tend to produce the longest possible statements and containers, regardless of type, which do not exceed the line length limit.

    To illustrate, consider the following input text:

        has subcmds => (
            is => 'ro',
            default => sub { [] },
        );

    The default formatting will keep the container broken, which is probably what the user prefers:

        # perltidy [default]
        has subcmds => (
            is      => 'ro',
            default => sub { [] },
        );

    But if old breakpoints are ignored, the list will be flattened:

        # perltidy -iob
        has subcmds => ( is => 'ro', default => sub { [] }, );

    Even if this is parameter is not used globally, it provides a convenient way to flatten selected lists from within an editor.

    Rather than ignoring all old breakpoints, it is possible to selectively control which breakpoints to follow or ignore with the controls which follow.

    But note that --ignore-old-breakpoints is a top level control and, if set, has priority over any settings of the specific lower level controls named --break-at-old-... and --keep-old-breakpoints-....

-botc,  --break-at-old-trailing-conditionals
    A statement which is broken at one of the trailing conditional modifiers

       if unless

    will remain broken by default. For example, the following input lines will remain unchanged with default formatting, even though they could fit on a single line:

        return
          if ( !defined($Kgw) || $Kgw < 0 || $Kgw > $Klimit );

    To make perltidy ignore the old "if" break and thus flatten the statement we can use the negative of this parameter, -nbotc:

        # perltidy -nbotc
        return if ( !defined($Kgw) || $Kgw < 0 || $Kgw > $Klimit );

-botl,  --break-at-old-trailing-loops
    Likewise, a statement which is broken at one of the trailing loop modifiers

       for foreach while until

    will remain broken by default. For example, the following input statement will remain unchanged with default formatting, even though it could fit a single line:

        $is_digit{$_} = 1
          for qw( 0 1 2 3 4 5 6 7 8 9 );

    To make perltidy ignore the old "for" break and thus flatten the statement we can use -nbotl:

        # perltidy -nbotl
        $is_digit{$_} = 1 for qw( 0 1 2 3 4 5 6 7 8 9 );

-bol,  --break-at-old-logical-breakpoints
    By default, if a logical expression within a container is broken at a "&&", "||", "and", or "or", then the container will remain broken. To prevent this, and thus form longer lines, use -nbol.

    For example, given this snippet with a breakpoint at the "&&":

        if (   defined($Kqw)
            && $Kqw >= 0 && $Kqw <= $Klimit )
        {
            ...;
        }

    the default result will keep the if parens open:

        # perltidy -bol [default]
        if (   defined($Kqw)
            && $Kqw >= 0
            && $Kqw <= $Klimit )
        {
            ...;
        }

    Note that this flag does not exactly duplicate old logical breakpoints. Rather, they are merely used as a hint that a statement should remain broken. Without this flag, perltidy will normally try to combine relatively short expressions into a single line.

    To cause old logical breakpoints to be ignored and thus achieve more compact expressions use the negated parameter -nbol:

        # perltidy -nbol
        if ( defined($Kqw) && $Kqw >= 0 && $Kqw <= $Klimit ) {
            ...;
        }

-bom,  --break-at-old-method-breakpoints
    By default, a method call arrow "->" is considered a candidate for a breakpoint, but method chains will fill to the line width before a break is considered. With -bom, breaks before the arrow are preserved, so if you have pre-formatted a method chain:

        # perltidy -bom
        $Document
          ->schild(0)
          ->schildren();

    the flag -bom will keep these line breaks, rather than become this:

        # perltidy [DEFAULT]
        $Document->schild(0)->schildren();

    This flag will also look for and keep a 'cuddled' style of calls, in which lines begin with a closing paren followed by a call arrow, as in this example:

        # perltidy -bom
        my $q = $rs->related_resultset(
            'CDs'
        )->related_resultset(
            'Tracks'
        )->search(
            {
                'track.id' => { -ident => 'none_search.id' },
            }
        )->as_query;

-bos,  --break-at-old-semicolon-breakpoints
    Semicolons are normally placed at the end of a statement. This means that formatted lines do not normally begin with semicolons. If the input stream has some lines which begin with semicolons, these can be retained by setting this flag. For example, consider the following two-line input snippet:

      $z = sqrt($x**2 + $y**2)
      ;

    The default formatting will be:

      $z = sqrt( $x**2 + $y**2 );

    Using the -bos flag keeps the isolated semicolon:

      # perltidy -bos
      $z = sqrt( $x**2 + $y**2 )
        ;

    The extra continuation indentation spaces on the semicolon can be removed by also setting --noindent-leading-semicolon.

      # perltidy -bos -nils
      $z = sqrt( $x**2 + $y**2 )
      ;

    The default is not to do this, -nbos.

-bok,  --break-at-old-keyword-breakpoints
    By default, perltidy will retain a breakpoint before keywords which may return lists, such as "sort" and "map". This allows chains of these operators to be displayed one per line. Use -nbok to prevent retaining these breakpoints.

-bot,  --break-at-old-ternary-breakpoints
    By default, if a conditional (ternary) operator is broken at a ":", then it will remain broken. To prevent this, and thereby form longer lines, use -nbot.

-boa,  --break-at-old-attribute-breakpoints
    By default, if an attribute list is broken at a ":" in the source file, then it will remain broken. For example, given the following code, the line breaks at the ':'s will be retained:

                        my @field
                          : field
                          : Default(1)
                          : Get('Name' => 'foo') : Set('Name');

    If the attributes are on a single line in the source code then they will remain on a single line if possible.

    To prevent this, and thereby always form longer lines, use -nboa.

Keeping old breakpoints at specific token types
    It is possible to override the choice of line breaks made by perltidy, and force it to follow certain line breaks in the input stream, with these two parameters:

    -kbb=s or --keep-old-breakpoints-before=s, and

    -kba=s or --keep-old-breakpoints-after=s

    These parameters are each followed by a quoted string, s, containing a list of token types (separated only by spaces). No more than one of each of these parameters should be specified, because repeating a command-line parameter always overwrites the previous one before perltidy ever sees it.

    For example, -kbb='='> means that if an input line begins with a '=>' then the output script should also have a line break before that token.

    For example, given the script:

        method 'foo'
          => [ Int, Int ]
          => sub {
            my ( $self, $x, $y ) = ( shift, @_ );
            ...;
          };

        # perltidy [default]
        method 'foo' => [ Int, Int ] => sub {
            my ( $self, $x, $y ) = ( shift, @_ );
            ...;
        };

        # perltidy -kbb='=>'
        method 'foo'
          => [ Int, Int ]
          => sub {
            my ( $self, $x, $y ) = ( shift, @_ );
            ...;
          };

    For the container tokens '{', '[' and '(' and, their closing counterparts, use the token symbol. Thus, the command to keep a break after all opening parens is:

       perltidy -kba='('

    It is possible to be more specific in matching parentheses by preceding them with a letter. The possible letters are 'k', 'K', 'f', 'F', 'w', and 'W', with these meanings (see "Specifying Paren Types"):

     'k' matches if the previous nonblank token is a perl keyword
         (such as 'if', 'while'),
     'K' matches if 'k' does not: previous token is not a keyword
     'f' matches if previous token is a function (not a keyword)
     'F' matches if 'f' does not.
     'w' matches if either 'k' or 'f' match.
     'W' matches if 'w' does not.

    So for example the following parameter will keep breaks after opening function call parens:

       perltidy -kba='f('

    NOTE: A request to break before an opening container, such as -kbb='(', will be silently ignored because it can lead to formatting instability. Likewise, a request to break after a closing container, such as -kba=')', will also be silently ignored.

-kis,  --keep-interior-semicolons
    Use the -kis flag to prevent breaking at a semicolon if there was no break there in the input file. Normally perltidy places a newline after each semicolon which terminates a statement unless several statements are contained within a one-line brace block. To illustrate, consider the following input lines:

        dbmclose(%verb_delim); undef %verb_delim;
        dbmclose(%expanded); undef %expanded;

    The default is to break after each statement, giving

        dbmclose(%verb_delim);
        undef %verb_delim;
        dbmclose(%expanded);
        undef %expanded;

    With perltidy -kis the multiple statements are retained:

        dbmclose(%verb_delim); undef %verb_delim;
        dbmclose(%expanded);   undef %expanded;

    The statements are still subject to the specified value of maximum-line-length and will be broken if this maximum is exceeded.

  Blank Line Control
Blank lines can improve the readability of a script if they are carefully placed. Perltidy has several commands for controlling the insertion, retention, and removal of blank lines.

-fbl,  --freeze-blank-lines
    Set -fbl if you want to the blank lines in your script to remain exactly as they are. The rest of the parameters in this section may then be ignored. (Note: setting the -fbl flag is equivalent to setting -mbl=0 and -kbl=2).

-bbc,  --blanks-before-comments
    This parameter allows perltidy to introduce a new blank line before a full-line comment to improve readability. This is the default. Use -nbbc or --noblanks-before-comments to prevent such blank lines from being introduced.

-bboc,  --blanks-before-opening-comments
    This parameter adjusts the behavior of the previous parameter, -bbc, at an opening comment. An opening comment is a full-line comment with an indentation greater than the previous line.

    When this parameter is turned on, perltidy is allowed to introduce a blank line to improve readability. This is the default. To prevent perltidy from introducing such a blank line, use --noblanks-before-opening-comments, or -nbboc. This option was added for issue git #192.

-blbs=n,  --blank-lines-before-subs=n
    The parameter -blbs=n requests that least n blank lines precede a sub definition which does not follow a comment and which is more than one-line long. The default is -blbs=1. BEGIN and END blocks are included.

    The requested number of blanks statement will be inserted regardless of the value of --maximum-consecutive-blank-lines=n (-mbl=n) with the exception that if -mbl=0 then no blanks will be output.

    This parameter interacts with the value k of the parameter --maximum-consecutive-blank-lines=k (-mbl=k) as follows:

    1. If -mbl=0 then no blanks will be output. This allows all blanks to be suppressed with a single parameter. Otherwise,

    2. If the number of old blank lines in the script is less than n then additional blanks will be inserted to make the total n regardless of the value of -mbl=k.

    3. If the number of old blank lines in the script equals or exceeds n then this parameter has no effect, however the total will not exceed value specified on the -mbl=k flag.

-blbp=n,  --blank-lines-before-packages=n
    The parameter -blbp=n requests that least n blank lines precede a package which does not follow a comment. The default is -blbp=1.

    This parameter interacts with the value k of the parameter --maximum-consecutive-blank-lines=k (-mbl=k) in the same way as described for the previous item -blbs=n.

-bbs,  --blanks-before-subs
    For compatibility with previous versions, -bbs or --blanks-before-subs is equivalent to -blbp=1 and -blbs=1.

    Likewise, -nbbs or --noblanks-before-subs is equivalent to -blbp=0 and -blbs=0.

-bbb,  --blanks-before-blocks
    A blank line will be introduced before blocks of coding delimited by for, foreach, while, until, and if, unless, in the following circumstances:

    •   The block is not preceded by a comment.

    •   The block is not a one-line block.

    •   The number of consecutive non-blank lines at the current indentation depth is at least -lbl (see next section).

    This is the default. The intention of this option is to introduce some space within dense coding. This is negated with -nbbb or --noblanks-before-blocks.

-lbl=n --long-block-line-count=n
    This controls how often perltidy is allowed to add blank lines before certain block types (see previous section). The default is 8. Entering a value of 0 is equivalent to entering a very large number.

-blao=i or --blank-lines-after-opening-block=i
    This control places a minimum of i blank lines after a line which ends with an opening block brace of a specified type. By default, this only applies to the block of a named sub, but this can be changed (see -blaol below). The default is not to do this (i=0).

    Please see the note below on using the -blao and -blbc options.

-blbc=i or --blank-lines-before-closing-block=i
    This control places a minimum of i blank lines before a line which begins with a closing block brace of a specified type. By default, this only applies to the block of a named sub, but this can be changed (see -blbcl below). The default is not to do this (i=0).

-blaol=s or --blank-lines-after-opening-block-list=s
    The parameter s is a list of block type keywords to which the flag -blao should apply. The section "Specifying Block Types" explains how to list block types.

-blbcl=s or --blank-lines-before-closing-block-list=s
    This parameter is a list of block type keywords to which the flag -blbc should apply. The section "Specifying Block Types" explains how to list block types.

Note on using the -blao and -blbc options.
    These blank line controls introduce a certain minimum number of blank lines in the text, but the final number of blank lines may be greater, depending on values of the other blank line controls and the number of old blank lines. A consequence is that introducing blank lines with these and other controls cannot be exactly undone, so some experimentation with these controls is recommended before using them.

    If necessary, it is possible to approximately undo these and other blank line controls with the parameter --keep-old-blank-lines-exceptions=s described below.

-mbl=n --maximum-consecutive-blank-lines=n
    This parameter specifies the maximum number of consecutive blank lines which will be output within code sections of a script. The default is n=1. If the input file has more than n consecutive blank lines, the number will be reduced to n except as noted above for the --blank-lines-before-subs and --blank-lines-before-subs parameters. If n=0 then no blank lines will be output (unless all old blank lines are retained with the --keep-old-blank-lines=2 flag of the next section).

    This flag obviously does not apply to pod sections, here-documents, and quotes.

-kbl=n,  --keep-old-blank-lines=n
    The -kbl=n flag gives you control over how your existing blank lines are treated.

    The possible values of n are:

     n=0 ignore all old blank lines
     n=1 stable: keep old blanks, but limited by the B<-mbl=n> flag, but
         remove existing blanks matching the B<--kblx=s> flag (see below)
     n=2 keep all old blank lines, regardless of the B<-mbl=n> flag

    The default and recommended setting is n=1. With this option, you may selectively filter out selected blank lines from the input stream before formatting begins using the parameter described in the next section.

    The setting n=0 should be used with caution because it will remove all blank lines, including lines which might be essential for controlling vertical alignment, and for preventing unwanted hanging side comments.

-kblx=s,  --keep-old-blank-lines-exceptions=s
    Most of the blank line controls described above specify a minimum number of blank lines, rather than a maximum, so they cannot be used remove lines. This parameter allows blank lines to be removed by selectively ignoring them in the input stream. It operates when --keep-old-blank-lines=1, which is the default as described above. The selection of blank lines to exclude is made with a string with one or more of the following special values:

       'b{' 'b}' '{b' '}b' 'bp' 'bs' 'bc' 'cb'

    In these symbols, the character b indicates the location of blank lines with respect to the next or previous token type. The token types { and } are opening and closing code blocks, the character p is a package statement, s is a sub definition, and c is a block comment.

    So for example bs means one or more blank lines before a sub will be ignored in the input stream. Note that this is approximately the opposite of the parameter -blanks-before-subs described above.

    In fact, these parameters provide approximate inverses to all of the previously described blank line options. To simplify things, the block types to which the "{" and "}" operators apply are the same as the corresponding operator which adds blank lines, described above. The following table shows these relationships:

       kblx=   Inverse  Applies to block types
       b{      -bbb      if unless while until for foreach
       b}      -blbc=i  -blbcl=s [default = sub]
       {b      -blao=i  -blaol=s [default = sub]
       }b      [none]   -blaol=s
       bp      -blbp=n
       bs      -blbs=n
       bc      -bbc
       cb      [none - comments before blanks]

    So, for example, the table indicates that to approximately remove the blank lines introduced by a -blao operation we could use -kblx='{b'.

    Some notes on using this parameter:

    •   The parameter string may contain multiple operators provided that they are space-separated.

    •   The comment deletion controls will keep at least one blank line between groups of comments, and between a side comment and following line comment.

    •   These operations occur on the input stream, before other blank line operations, so they may be used in the same run as other blank line controls. So it can happen that these controls will remove blanks from the input stream while other controls add blank lines back.

    •   These operations will normally only be needed occasionally to correct some problems, or undo an unwanted operation.

-sob,  --swallow-optional-blank-lines
    This is equivalent to --keep-old-blank-lines=0 and is included for compatibility with previous versions.

-nsob,  --noswallow-optional-blank-lines
    This is equivalent to --keep-old-blank-lines=1 and is included for compatibility with previous versions.

Controls for blank lines around lines of consecutive keywords

The parameters in this section provide some control over the placement of blank lines within and around groups of statements beginning with selected keywords. These blank lines are called here keyword group blanks, and all of the parameters begin with --keyword-group-blanks*, or -kgb* for short. The default settings do not employ these controls but they can be enabled with the following parameters:

-kgbl=s or --keyword-group-blanks-list=s; s is a quoted string of keywords

-kgbs=s or --keyword-group-blanks-size=s; s gives the number of keywords required to form a group.

-kgbb=n or --keyword-group-blanks-before=n; n = (0, 1, or 2) controls a leading blank

-kgba=n or --keyword-group-blanks-after=n; n = (0, 1, or 2) controls a trailing blank

-kgbi or --keyword-group-blanks-inside is a switch for adding blanks between subgroups

-kgbd or --keyword-group-blanks-delete is a switch for removing initial blank lines between keywords

-kgbr=n or --keyword-group-blanks-repeat-count=n can limit the number of times this logic is applied

In addition, the following abbreviations are available to for simplified usage:

-kgb or --keyword-group-blanks is short for -kgbb=2 -kgba=2 kgbi

-nkgb or --nokeyword-group-blanks, is short for -kgbb=1 -kgba=1 nkgbi

Before describing the meaning of the parameters in detail let us look at an example which is formatted with default parameter settings.

    print "Entering test 2\n";
    use Test;
    use Encode qw(from_to encode decode
      encode_utf8 decode_utf8
      find_encoding is_utf8);
    use charnames qw(greek);
    my @encodings     = grep( /iso-?8859/, Encode::encodings() );
    my @character_set = ( '0' .. '9', 'A' .. 'Z', 'a' .. 'z' );
    my @source        = qw(ascii iso8859-1 cp1250);
    my @destiny       = qw(cp1047 cp37 posix-bc);
    my @ebcdic_sets   = qw(cp1047 cp37 posix-bc);
    my $str           = join( '', map( chr($_), 0x20 .. 0x7E ) );
    return unless ($str);

using perltidy -kgb gives:

    print "Entering test 2\n";
                              <----------this blank controlled by -kgbb
    use Test;
    use Encode qw(from_to encode decode
      encode_utf8 decode_utf8
      find_encoding is_utf8);
    use charnames qw(greek);
                              <---------this blank controlled by -kgbi
    my @encodings     = grep( /iso-?8859/, Encode::encodings() );
    my @character_set = ( '0' .. '9', 'A' .. 'Z', 'a' .. 'z' );
    my @source        = qw(ascii iso8859-1 cp1250);
    my @destiny       = qw(cp1047 cp37 posix-bc);
    my @ebcdic_sets   = qw(cp1047 cp37 posix-bc);
    my $str           = join( '', map( chr($_), 0x20 .. 0x7E ) );
                              <----------this blank controlled by -kgba
    return unless ($str);

Blank lines have been introduced around the my and use sequences. What happened is that the default keyword list includes my and use but not print and return. So a continuous sequence of nine my and use statements was located. This number exceeds the default threshold of five, so blanks were placed before and after the entire group. Then, since there was also a subsequence of six my lines, a blank line was introduced to separate them.

Finer control over blank placement can be achieved by using the individual parameters rather than the -kgb flag. The individual controls are as follows.

-kgbl=s or --keyword-group-blanks-list=s, where s is a quoted string, defines the set of keywords which will be formed into groups. The string is a space separated list of keywords. The default set is s="use require local our my", but any list of keywords may be used. Comment lines may also be included in a keyword group, even though they are not keywords. To include ordinary block comments, include the symbol BC. To include static block comments (which normally begin with '##'), include the symbol SBC.

-kgbs=s or --keyword-group-blanks-size=s, where s is a string describing the number of consecutive keyword statements forming a group (Note: statements separated by blank lines in the input file are considered consecutive for purposes of this count). If s is an integer then it is the minimum number required for a group. A maximum value may also be given with the format s=min.max, where min is the minimum number and max is the maximum number, and the min and max values are separated by one or more dots. No groups will be found if the maximum is less than the minimum. The maximum is unlimited if not given. The default is s=5. Some examples:

    s      min   max         number for group
    3      3     unlimited   3 or more
    1.1    1     1           1
    1..3   1     3           1 to 3
    1.0    1     0           (no match)

There is no really good default value for this parameter. If it is set too small, then an excessive number of blank lines may be generated. However, some users may prefer reducing the value somewhat below the default, perhaps to s=3.

-kgbb=n or --keyword-group-blanks-before=n specifies whether a blank should appear before the first line of the group, as follows:

   n=0 => (delete) an existing blank line will be removed
   n=1 => (stable) no change to the input file is made  [DEFAULT]
   n=2 => (insert) a blank line is introduced if possible

-kgba=n or --keyword-group-blanks-after=n likewise specifies whether a blank should appear after the last line of the group, using the same scheme (0=delete, 1=stable, 2=insert).

-kgbi or --keyword-group-blanks-inside controls the insertion of blank lines between the first and last statement of the entire group. If there is a continuous run of a single statement type with more than the minimum threshold number (as specified with -kgbs=s) then this switch causes a blank line be inserted between this subgroup and the others. In the example above this happened between the use and my statements.

-kgbd or --keyword-group-blanks-delete controls the deletion of any blank lines that exist in the group when it is first scanned. When statements are initially scanned, any existing blank lines are included in the collection. Any such original blank lines will be deleted before any other insertions are made when the parameter -kgbd is set. The default is not to do this, -nkgbd.

-kgbr=n or --keyword-group-blanks-repeat-count=n specifies n, the maximum number of times this logic will be applied to any file. The special value n=0 is the same as n=infinity which means it will be applied to an entire script [Default]. A value n=1 could be used to make it apply just one time for example. This might be useful for adjusting just the use statements in the top part of a module for example.

-kgb or --keyword-group-blanks is an abbreviation equivalent to setting -kgbb=1 -kgba=1 -kgbi. This turns on keyword group formatting with a set of default values.

-nkgb or --nokeyword-group-blanks is equivalent to -kgbb=0 -kgba nkgbi. This flag turns off keyword group blank lines and is the default setting.

Here are a few notes about the functioning of this technique.

•   These parameters are probably more useful as part of a major code reformatting operation rather than as a routine formatting operation.

    In particular, note that deleting old blank lines with -kgbd is an irreversible operation so it should be applied with care. Existing blank lines may be serving an important role in controlling vertical alignment.

•   Conflicts which arise among these kgb* parameters and other blank line controls are generally resolved by producing the maximum number of blank lines implied by any parameter.

    For example, if the flags --freeze-blank-lines, or --keep-old-blank-lines=2, are set, then they have priority over any blank line deletion implied by the -kgb flags of this section, so no blank lines will be deleted.

    For another example, if a keyword group ends at a sub and the flag kgba=0 requests no blank line there, but we also have --blank-lines-before-subs=2, then two blank lines will still be introduced before the sub.

•   The introduction of blank lines does not occur if it would conflict with other input controls or code validity. For example, a blank line will not be placed within a here-doc or within a section of code marked with format skipping comments. And in general, a blank line will only be introduced at the end of a group if the next statement is a line of code.

•   The count which is used to determine the group size is not the number of lines but rather the total number of keywords which are found. Individual statements with a certain leading keyword may continue on multiple lines, but if any of these lines is nested more than one level deep then that group will be ended.

•   The search for groups of lines with similar leading keywords is based on the input source, not the final formatted source. Consequently, if the source code is badly formatted, it would be best to make a first formatting pass without these options.

  Styles
A style refers to a convenient collection of existing parameters.

-gnu, --gnu-style
    -gnu gives an approximation to the GNU Coding Standards (which do not apply to perl) as they are sometimes implemented. At present, this style overrides the default style with the following parameters:

        -lp -bl -noll -pt=2 -bt=2 -sbt=2 -icp

    To use this style with -xlp (--extended-line-up-parentheses) instead of -lp (--line-up-parentheses) use -gnu -xlp.

-pbp, --perl-best-practices
    -pbp is an abbreviation for the parameters in the book Perl Best Practices by Damian Conway:

        -l=78 -i=4 -ci=4 -st -se -vt=2 -cti=0 -pt=1 -bt=1 -sbt=1 -bbt=1
        -nsfs -nolq
        -wbb="% + - * / x != == >= <= =~ !~ < > | & =
              **= += *= &= <<= &&= -= /= |= >>= ||= //= .= %= ^= x="

    Please note that this parameter set includes -st (--standard-output) and -se (--standard-error-output) flags, which make perltidy act as a filter on one file only. These can be overridden by placing -nst and/or -nse after the -pbp parameter.

    Also note that the value of continuation indentation, -ci=4, is equal to the value of the full indentation, -i=4. It is recommended that the either (1) the parameter -ci=2 be used instead, or (2) the flag -xci be set. This will help show structure, particularly when there are ternary statements. The following snippet illustrates these options.

        # perltidy -pbp
        $self->{_text} = (
             !$section        ? ''
            : $type eq 'item' ? "the $section entry"
            :                   "the section on $section"
            )
            . (
            $page
            ? ( $section ? ' in ' : '' ) . "the $page_ext manpage"
            : ' elsewhere in this document'
            );

        # perltidy -pbp -ci=2
        $self->{_text} = (
             !$section        ? ''
            : $type eq 'item' ? "the $section entry"
            :                   "the section on $section"
          )
          . (
            $page
            ? ( $section ? ' in ' : '' ) . "the $page_ext manpage"
            : ' elsewhere in this document'
          );

        # perltidy -pbp -xci
        $self->{_text} = (
             !$section        ? ''
            : $type eq 'item' ? "the $section entry"
            :                   "the section on $section"
            )
            . ( $page
                ? ( $section ? ' in ' : '' ) . "the $page_ext manpage"
                : ' elsewhere in this document'
            );

    The -xci flag was developed after the -pbp parameters were published so you need to include it separately.

Making a file unreadable
    The goal of perltidy is to improve the readability of files, but there are two commands which have the opposite effect, --mangle and --extrude. They are actually merely aliases for combinations of other parameters. Both of these strip all possible whitespace, but leave comments and pod documents, so that they are essentially reversible. The difference between these is that --mangle puts the fewest possible line breaks in a script while --extrude puts the maximum possible. Note that these options do not provided any meaningful obfuscation, because perltidy can be used to reformat the files. They were originally developed to help test the tokenization logic of perltidy, but they have other uses. One use for --mangle is the following:

      perltidy --mangle myfile.pl -st | perltidy -o myfile.pl.new

    This will form the maximum possible number of one-line blocks (see next section), and can sometimes help clean up a badly formatted script.

    A similar technique can be used with --extrude instead of --mangle to make the minimum number of one-line blocks.

    Another use for --mangle is to combine it with --delete-all-comments (-dac) to reduce the file size of a perl script.

  One-Line Blocks
A one-line block is a block of code where the contents within the curly braces is short enough to fit on a single line. For example,

    if ( -e $file ) { print "'$file' exists\n" }

The alternative, a block which spans multiple lines, is said to be a broken block. With few exceptions, perltidy retains existing one-line blocks, if it is possible within the line-length constraint, but it does not attempt to form new ones. In other words, perltidy will try to follow the input file regarding broken and unbroken blocks.

The main exception to this rule is that perltidy will attempt to form new one-line blocks following the keywords "map", "eval", and "sort", "eval", because these code blocks are often small and most clearly displayed in a single line. This behavior can be controlled with the flag --one-line-block-exclusion-list described below.

When the cuddled-else style is used, the default treatment of one-line blocks may interfere with the cuddled style. In this case, the default behavior may be changed with the flag --cuddled-break-option=n described elsewhere.

When an existing one-line block is longer than the maximum line length, and must therefore be broken into multiple lines, perltidy checks for and adds any optional terminating semicolon (unless the -nasc option is used) if the block is a code block.

-olbxl=s, --one-line-block-exclusion-list=s
    As noted above, perltidy will, by default, attempt to create new one-line blocks for certain block types. This flag allows the user to prevent this behavior for the block types listed in the string s. The list s may include any of the words "sort", "map", "grep", "eval", or it may be "*" to indicate all of these.

    So for example to prevent multiline eval blocks from becoming one-line blocks, the command would be -olbxl='eval'. In this case, existing one-line eval blocks will remain on one-line if possible, and existing multiline eval blocks will remain multiline blocks.

-olbn=n, --one-line-block-nesting=n
    Nested one-line blocks are lines with code blocks which themselves contain code blocks. For example, the following line is a nested one-line block.

             foreach (@list) { if ($_ eq $asked_for) { last } ++$found }

    The default behavior is to break such lines into multiple lines, but this behavior can be controlled with this flag. The values of n are:

      n=0 break nested one-line blocks into multiple lines [DEFAULT]
      n=1 stable: keep existing nested-one line blocks intact

    For the above example, the default formatting (-olbn=0) is

        foreach (@list) {
            if ( $_ eq $asked_for ) { last }
            ++$found;
        }

    If the parameter -olbn=1 is given, then the line will be left intact if it is a single line in the source, or it will be broken into multiple lines if it is broken in multiple lines in the source.

-olbs=n, --one-line-block-semicolons=n
    This flag controls the placement of semicolons at the end of one-line blocks. Semicolons are optional before a closing block brace, and frequently they are omitted at the end of a one-line block containing just a single statement. By default, perltidy follows the input file regarding these semicolons, but this behavior can be controlled by this flag. The values of n are:

     n=0 remove terminal semicolons in single-statement one-line blocks
     n=1 stable; keep input terminal semicolons [DEFAULT ]
     n=2 add terminal semicolons in all one-line blocks

    Note that the n=2 option has no effect if adding semicolons is prohibited with the -nasc flag. Also not that while n=2 adds missing semicolons to all one-line blocks, regardless of complexity, the n=0 option only removes ending semicolons which terminate one-line blocks containing just one semicolon. So these two options are not exact inverses.

Forming new one-line blocks
    Sometimes it might be desirable to convert a script to have one-line blocks whenever possible. Although there is currently no flag for this, a simple workaround is to execute perltidy twice, once with the flag --noadd-newlines and then once again with normal parameters, like this:

         cat infile | perltidy -nanl | perltidy >outfile

    When executed on this snippet

        if ( $? == -1 ) {
            die "failed to execute: $!\n";
        }
        if ( $? == -1 ) {
            print "Had enough.\n";
            die "failed to execute: $!\n";
        }

    the result is

        if ( $? == -1 ) { die "failed to execute: $!\n"; }
        if ( $? == -1 ) {
            print "Had enough.\n";
            die "failed to execute: $!\n";
        }

    This shows that blocks with a single statement become one-line blocks.

Breaking existing one-line blocks
    There is no automatic way to break existing long one-line blocks into multiple lines, but this can be accomplished by processing a script, or section of a script, with a short value of the parameter maximum-line-length=n. Then, when the script is reformatted again with the normal parameters, the blocks which were broken will remain broken (with the exceptions noted above).

    Another trick for doing this for certain block types is to format one time with the --cuddled-else flag and --cuddled-break-option=2. Then format again with the normal parameters. This will break any one-line blocks which are involved in a cuddled-else style.

  Controlling Vertical Alignment
Vertical alignment refers to lining up certain symbols in a list of consecutive similar lines to improve readability. For example, the "fat commas" are aligned in the following statement:

        $data = $pkg->new(
            PeerAddr => join( ".", @port[ 0 .. 3 ] ),
            PeerPort => $port[4] * 256 + $port[5],
            Proto    => 'tcp'
        );

Vertical alignment can be completely turned off using the -novalign flag mentioned below. However, vertical alignment can be forced to stop and restart by selectively introducing blank lines. For example, a blank has been inserted in the following code to keep somewhat similar things aligned.

    %option_range = (
        'format'             => [ 'tidy', 'html', 'user' ],
        'output-line-ending' => [ 'dos',  'win',  'mac', 'unix' ],
        'character-encoding' => [ 'none', 'utf8' ],

        'block-brace-tightness'    => [ 0, 2 ],
        'brace-tightness'          => [ 0, 2 ],
        'paren-tightness'          => [ 0, 2 ],
        'square-bracket-tightness' => [ 0, 2 ],
    );

Vertical alignment is implemented by locally widening an existing blank space in a line to produce alignment with an adjacent line. It cannot occur if there is no blank space to widen. So if a particular space is removed by one of the existing controls then vertical alignment cannot occur.

For example, if we remove the space before the "fat commas" in the above example, vertical alignment cannot occur:

        # perltidy --no-want-left-space='=>'
        $data = $pkg->new(
            PeerAddr=> join( ".", @port[ 0 .. 3 ] ),
            PeerPort=> $port[4] * 256 + $port[5],
            Proto=> 'tcp'
        );

Completely turning off vertical alignment with -novalign
    The default is to use vertical alignment, but vertical alignment can be completely turned of with the -novalign flag.

    A lower level of control of vertical alignment is possible with three parameters -vc, -vsc, and -vbc. These independently control alignment of code, side comments and block comments. They are described in the next section.

    The parameter -valign is in fact an alias for -vc -vsc -vbc, and its negative -novalign is an alias for -nvc -nvsc -nvbc.

Controlling code alignment with --valign-code or -vc
    The -vc flag enables alignment of code symbols such as =. The default is -vc. For detailed control of which symbols to align, see the -valign-exclude-list parameter below.

Controlling side comment alignment with --valign-side-comments or -vsc
    The basic rule for side comment alignment is that side comments on a sequence of lines with the same leading indentation will be aligned if space allows. Side comments on lines with different leading indentations will generally not be aligned.

    The -vsc flag enables alignment of side comments and is enabled by default. If side comment alignment is disabled with -nvsc they will appear at a fixed space from the preceding code token. The default is -vsc

Controlling block comment alignment with --valign-block-comments or -vbc
    When -vbc is enabled, block comments can become aligned for example if one comment of a consecutive sequence of comments becomes outdented due a length in excess of the maximum line length. If this occurs, the entire group of comments will remain aligned and be outdented by the same amount. This coordinated alignment will not occur if -nvbc is set. The default is -vbc.

Finer alignment control with --valign-exclusion-list=s or -vxl=s and --valign-inclusion-list=s or -vil=s
    More detailed control of alignment types is available with these two parameters. Most of the vertical alignments in typical programs occur at one of the tokens ',', '=', and '=>', but many other alignments are possible and are given in the following list:

      = **= += *= &= <<= &&= -= /= |= >>= ||= //= .= %= ^= x= ^^=
      { ( ? : , ; => && || ~~ !~~ =~ !~ // <=> -> q
      if unless and or err for foreach while until cmp

    These alignment types correspond to perl symbols, operators and keywords except for 'q', which refers to the special case of alignment in a 'use' statement of qw quotes and empty parens.

    They are all enabled by default, but they can be selectively disabled by including one or more of these tokens in the space-separated list valign-exclusion-list=s. For example, the following would prevent alignment at = and if:

      --valign-exclusion-list='= if'

    If it is simpler to specify only the token types which are to be aligned, then include the types which are to be aligned in the list of --valign-inclusion-list. In that case you may leave the valign-exclusion-list undefined, or use the special symbol * for the exclusion list. For example, the following parameters enable alignment only at commas and 'fat commas':

     --valign-inclusion-list=', =>'
     --valign-exclusion-list='*'  ( this is optional and may be omitted )

    These parameter lists should consist of space-separated tokens from the above list of possible alignment tokens, or a '*'. If an unrecognized token appears, it is simply ignored. And if a specific token is entered in both lists by mistake then the exclusion list has priority.

    The default values of these parameters enable all alignments and are equivalent to

      --valign-exclusion-list=' '
      --valign-inclusion-list='*'

    To illustrate, consider the following snippet with default formatting

      # perltidy
      $co_description = ($color) ? 'bold cyan'  : '';           # descr
      $co_prompt      = ($color) ? 'bold green' : '';           # prompt
      $co_unused      = ($color) ? 'on_green'   : 'reverse';    # unused

    To exclude all alignments except the equals (i.e., include only equals) we could use:

      # perltidy -vil='='
      $co_description = ($color) ? 'bold cyan' : '';          # descr
      $co_prompt      = ($color) ? 'bold green' : '';         # prompt
      $co_unused      = ($color) ? 'on_green' : 'reverse';    # unused

    To exclude only the equals we could use:

      # perltidy -vxl='='
      $co_description = ($color) ? 'bold cyan' : '';     # descr
      $co_prompt = ($color) ? 'bold green' : '';         # prompt
      $co_unused = ($color) ? 'on_green' : 'reverse';    # unused

    Notice in this last example that although only the equals alignment was excluded, the ternary alignments were also lost. This happens because the vertical aligner sweeps from left-to-right and usually stops if an important alignment cannot be made for some reason.

    But also notice that side comments remain aligned because their alignment is controlled separately with the parameter --valign-side-comments described above.

Aligning postfix unless and if with --valign-if-unless or -viu
    By default, postfix if terms align and postfix unless terms align, but separately. For example,

      # perltidy [DEFAULT]
      print "Tried to add: @Resolve\n" if ( @Resolve and !$Quiet );
      print "Would need: @DepList\n"   if ( @DepList and !$Quiet );
      print "Output:\n"                  unless $Quiet;
      print join( "\n", @Output ) . "\n" unless $Quiet;

    The -viu flag causes a postfix unless to be treated as if it were a postfix if for purposes of alignment, and thus they align:

      # perltidy -viu
      print "Tried to add: @Resolve\n"   if ( @Resolve and !$Quiet );
      print "Would need: @DepList\n"     if ( @DepList and !$Quiet );
      print "Output:\n"                  unless $Quiet;
      print join( "\n", @Output ) . "\n" unless $Quiet;

Aligning cmp and <=> with --valign-comparison-operators or -vco
    By default, the string comparison operator cmp aligns with the numeric comparison operator <=>. To prevent this, use the negative of this parameter. For example,

      # perltidy [DEFAULT]
      sub sortName       { $a->{"file"}       cmp $b->{"file"}; }
      sub sortNameNoCase { uc( $a->{"file"} ) cmp uc( $b->{"file"} ); }
      sub sortSize       { $b->{"size"}       <=> $a->{"size"}; }
      sub sortDate       { $b->{"mtime"}      <=> $a->{"mtime"}; }

      # perltidy -nvco
      sub sortName       { $a->{"file"}       cmp $b->{"file"}; }
      sub sortNameNoCase { uc( $a->{"file"} ) cmp uc( $b->{"file"} ); }
      sub sortSize       { $b->{"size"}  <=> $a->{"size"}; }
      sub sortDate       { $b->{"mtime"} <=> $a->{"mtime"}; }

Aligning signed numbers with --valign-signed-numbers or -vsn
    Setting -vsn causes columns of numbers containing both signed and unsigned values to have leading signs placed in their own column. For example:

        # perltidy -vsn
        my @correct = (
            [  123456.79,   86753090000.868,  11 ],
            [ -123456.79,  -86753090000.868, -11 ],
            [  123456.001,  80.080,           10 ],
            [ -123456.001, -80.080,           0 ],
            [  10.9,        10.9,             11 ],
        );

    The default is -vsn. This can be turned off to get is strict left justification:

        # perltidy -nvsn
        my @correct = (
            [ 123456.79,   86753090000.868,  11 ],
            [ -123456.79,  -86753090000.868, -11 ],
            [ 123456.001,  80.080,           10 ],
            [ -123456.001, -80.080,          0 ],
            [ 10.9,        10.9,             11 ],
        );

    Some points regarding -vsn are:

    •   This option works by inserting a single space ahead of unsigned numbers when possible. This is not done if it would require increasing the maximum width of a column.

    •   This option is mainly limited to lists of comma-separated numbers. For multiline lists of numbers, having trailing commas can sometimes improve the results. If missing, perltidy can add them for example with parameters -wtc=b -atc. See "Adding and Deleting Commas".

    •   This option has a control parameter --valign-signed-number-limit=N, or -vsnl=N. This value controls formatting of very long columns of numbers and should not normally need to be changed. To see its purpose, consider a very long column of just unsigned numbers, say 1000 lines. If we add a single negative number, it is undesirable to move all of the other numbers over by one space. This could create many lines of file differences but not really improve the appearance when a local section of the table was viewed. The number N avoids this problem by not adding extra indentation to a run of more than N lines of unsigned numbers. The default value, N=20, is set to be a number of lines for which the ends of a long column of unsigned numbers are not normally both in view.

Aligning assignment operators with --valign-wide-equals or -vwe
    The following assignment operators are aligned independently by default:

          = **= += *= &= <<= &&= -= /= |= >>= ||= //= .= %= ^= x= ^^=

    Setting --valign-wide-equals, or -vwe, causes them to be vertically aligned together with the trailing = all aligned. For example, here is the default formatting for some code with several of these operators:

                $str .= SPACE x $total_pad_count;
                $str_len += $total_pad_count;
                $total_pad_count = 0;
                $str .= $rfields->[$j];
                $str_len += $rfield_lengths->[$j];

    And here is the same code formatted with -vwe:

                # perltidy -vwe
                $str             .= SPACE x $total_pad_count;
                $str_len         += $total_pad_count;
                $total_pad_count  = 0;
                $str             .= $rfields->[$j];
                $str_len         += $rfield_lengths->[$j];

    This option was added for issue git #135 and can improve readability, but it is off by default to avoid changing existing formatting.

  Extended Syntax
This section describes some parameters for dealing with extended syntax.

For another method of handling extended syntax see the section "Skipping Selected Sections of Code".

Also note that the module Perl::Tidy supplies a pre-filter and post-filter capability. This requires calling the module from a separate program rather than through the binary perltidy.

-xs,   --extended-syntax
    This flag allows perltidy to handle certain common extensions to the standard syntax without complaint.

    For example, without this flag a structure such as the following would generate a syntax error:

        Method deposit( Num $amount) {
            $self->balance( $self->balance + $amount );
        }

    This flag is enabled by default but it can be deactivated with -nxs. Probably the only reason to deactivate this flag is to generate more diagnostic messages when debugging a script.

-sal=s,   --sub-alias-list=s
    This flag causes one or more words to be treated the same as if they were the keyword sub. The string s contains one or more alias words, separated by spaces or commas.

    For example,

            perltidy -sal='method fun _sub M4'

    will cause the perltidy to treat the words 'method', 'fun', '_sub' and 'M4' the same as if they were 'sub'. Note that if the alias words are separated by spaces then the string of words should be placed in quotes.

    Note that several other parameters accept a list of keywords, including 'sub' (see "Specifying Block Types"). You do not need to include any sub aliases in these lists. Just include keyword 'sub' if you wish, and all aliases are automatically included.

-gal=s,   --grep-alias-list=s
    This flag allows a code block following an external 'list operator' function to be formatted as if it followed one of the built-in keywords grep, map or sort. The string s contains the names of one or more such list operators, separated by spaces or commas.

    By 'list operator' is meant a function which is invoked in the form

          word {BLOCK} @list

    Perltidy tries to keep code blocks for these functions intact, since they are usually short, and does not automatically break after the closing brace since a list may follow. It also does some special handling of continuation indentation.

    For example, the code block arguments to functions 'My_grep' and 'My_map' can be given formatting like 'grep' with

            perltidy -gal='My_grep My_map'

    By default, the following list operators in List::Util are automatically included:

          all any first none notall reduce reductions

    Any operators specified with --grep-alias-list are added to this list. The next parameter can be used to remove words from this default list.

-gaxl=s,   --grep-alias-exclusion-list=s
    The -gaxl=s flag provides a method for removing any of the default list operators given above by listing them in the string s. To remove all of the default operators use -gaxl='*'.

-uf=s,   --use-feature=s
    This flag tells perltidy to allow or disallow the syntax associated a pragma in string s. The current possible settings are:

    •   --use-feature='class'. This tells perltidy to recognized the special words class, method, field, and ADJUST as defined for this feature.

    •   --use-feature='noclass'. This tells perltidy not to treat words class, method, field, ADJUST specially.

    •   Neither of these (--use-feature not defined). This is the DEFAULT and recommended setting. In this case perltidy will try to automatically handle both the newer "feature 'class'" syntax as well as some conflicting uses of some of these special words by existing modules.

    Note that this parameter is independent of any use feature control lines within a script. Perltidy does not look for or read such control lines. This is because perltidy must be able to work on small chunks of code sent from an editor, so it cannot assume that such lines will be within the lines being formatted.

Working around problems with older version of Perl
    Perltidy contains a number of rules which help avoid known subtleties and problems with older versions of perl, and these rules always take priority over whatever formatting flags have been set. For example, perltidy will usually avoid starting a new line with a bareword, because this might cause problems if "use strict" is active.

    There is no way to override these rules.

  Deleting and Extracting Pod or Comments

Deleting selected text
    Perltidy can selectively delete comments and/or pod documentation. The command -dac or --delete-all-comments will delete all comments and all pod documentation, leaving just code and any leading system control lines.

    The command -dp or --delete-pod will remove all pod documentation (but not comments).

    Two commands which remove comments (but not pod) are: -dbc or --delete-block-comments and -dsc or --delete-side-comments. (Hanging side comments will be deleted with side comments here.)

    The negatives of these commands also work, and are the defaults.

    --delete-block-comments, or -dbc, deletes all full-line comments except the following:

    •   Comments controlling format skipping and code skipping

    •   Comments of the form '## no critic' unless --ignore-perlcritic-comments, or -ipc, is also set.

    •   Any leading 'hash-bang' will be retained.

    •   If the -x flag is used, any system commands before a leading hash-bang will be retained (even if they are in the form of comments).

    --delete-side-comments, or -dsc, deletes all side comments except the following:

    •   Any special control side comments for non-indenting braces will be retained unless they are deactivated with a -nnib flag.

    •   Comments of the form '## no critic' unless --ignore-perlcritic-comments, or -ipc, is also set.

    •   Side comments which match a pattern defined by --delete-side-comments-exception-pattern, if it is defined (see next section).

    --delete-side-comments-exclusion-pattern=s, or -dscxp=s, defines an optional string s of leading characters which, if matched by a side comment, causes any -dsc command not to delete that comment. The first character(s) must be '#' or '\#'. For example, the following commands tell perltidy to delete side comments except those beginning with two hash symbols:

        perltidy -dsc -dscxp='\#\#' file.pl

    The backslashes are typically required before the hash symbols to get them past a command line shell. The string s is treated by perltidy as a regex pattern.

Writing selected text to a file
    When perltidy writes a formatted text file, it has the ability to also send selected text to a file with a .TEE extension. This text can include comments and pod documentation.

    The command -tac or --tee-all-comments will write all comments and all pod documentation.

    The command -tp or --tee-pod will write all pod documentation (but not comments).

    The commands which write comments (but not pod) are: -tbc or --tee-block-comments and -tsc or --tee-side-comments. (Hanging side comments will be written with side comments here.)

    The negatives of these commands also work, and are the defaults.

  The perltidyrc file

Using a .perltidyrc command file
    If you use perltidy frequently, you probably won't be happy until you create a .perltidyrc file to avoid typing commonly-used parameters. Perltidy will first look in your current directory for a command file named .perltidyrc. If it does not find one, it will continue looking for one in other standard locations.

    These other locations are system-dependent, and may be displayed with the command "perltidy -dpro". Under Unix systems, it will first look for an environment variable PERLTIDY. Then it will look for a .perltidyrc file in the home directory, and then for a system-wide file /usr/local/etc/perltidyrc, and then it will look for /etc/perltidyrc. Note that these last two system-wide files do not have a leading dot. Further system-dependent information will be found in the INSTALL file distributed with perltidy.

    Under Windows, perltidy will also search for a configuration file named perltidy.ini since Windows does not allow files with a leading period (.). Use "perltidy -dpro" to see the possible locations for your system. An example might be C:\Documents and Settings\All Users\perltidy.ini.

    Another option is the use of the PERLTIDY environment variable. The method for setting environment variables depends upon the version of Windows that you are using.

    Under Windows NT / 2000 / XP the PERLTIDY environment variable can be placed in either the user section or the system section. The later makes the configuration file common to all users on the machine. Be sure to enter the full path of the configuration file in the value of the environment variable. Ex. PERLTIDY=C:\Documents and Settings\perltidy.ini

    The configuration file is free format, and simply a list of parameters, just as they would be entered on a command line. Any number of lines may be used, with any number of parameters per line, although it may be easiest to read with one parameter per line. Comment text begins with a #, and there must also be a space before the # for side comments. It is a good idea to put complex parameters in either single or double quotes.

    Here is an example of a .perltidyrc file:

      # This is a simple of a .perltidyrc configuration file
      # This implements a highly spaced style
      -se    # errors to standard error output
      -w     # show all warnings
      -bl    # braces on new lines
      -pt=0  # parens not tight at all
      -bt=0  # braces not tight
      -sbt=0 # square brackets not tight

    The parameters in the .perltidyrc file are installed first, so any parameters given on the command line will have priority over them.

    To avoid confusion, perltidy ignores any command in the .perltidyrc file which would cause some kind of dump and an exit. These include:

     -h -v -ddf -dln -dop -dsn -dtt -dwls -dwrs -ss

    There are several options may be helpful in debugging a .perltidyrc file:

    •   A very helpful command is --dump-profile or -dpro. It writes a list of all configuration filenames tested to standard output, and if a file is found, it dumps the content to standard output before exiting. So, to find out where perltidy looks for its configuration files, and which one if any it selects, just enter

          perltidy -dpro

    •   It may be simplest to develop and test configuration files with alternative names, and invoke them with -pro=filename on the command line. Then rename the desired file to .perltidyrc when finished.

    •   The parameters in the .perltidyrc file can be switched off with the -npro option on the command line.

    •   Any parameter in the .perltidyrc file can be overridden with a replacement value on the command line. This is because the command line is processed after the .perltidyrc file.

    •   The commands --dump-options, --dump-defaults, --dump-long-names, and --dump-short-names, all described below, may all be helpful.

Skipping a line with an unknown parameter
    Versions of perltidy greater than 20240511 have an option to filter unrecognized parameters from a perltidy command file. If a line in the file begins with three dashes followed by a parameter name (rather than one or two), then the line will be removed if the parameter is unknown. Otherwise, a dash will be removed to make the line valid. This option was added to allow a single command file to be used during the transition to a new version of perltidy.

Creating a new abbreviation
    A special notation is available for use in a .perltidyrc file for creating an abbreviation for a group of options. This can be used to create a shorthand for one or more styles which are frequently, but not always, used. The notation is to group the options within curly braces which are preceded by the name of the alias (without leading dashes), like this:

            newword {
            -opt1
            -opt2
            }

    where newword is the abbreviation, and opt1, etc, are existing parameters or other abbreviations. The main syntax requirement is that the new abbreviation along with its opening curly brace must begin on a new line. Space before and after the curly braces is optional.

    For a specific example, the following definition

      debug {
         --warn-similar-keys
         --warn-unique-keys
      }

    or equivalently, with abbreviations,

      debug { -wsk -wuk }

    could be placed in a .perltidyrc file. The new name, in this case debug, is arbitrary provided that it does not conflict with an existing parameter. The extra warning checks defined with this new parameter will be ignored unless the new parameter -debug is added to the command line. All other settings in the .perltidyrc file still apply. Thus it provides a way to do some extra checking when perltidy is invoked with

            perltidy -debug ...

    (Either -debug or --debug may be used).

Skipping leading non-perl commands with -x or --look-for-hash-bang
    If your script has leading lines of system commands or other text which are not valid perl code, and which are separated from the start of the perl code by a "hash-bang" line, ( a line of the form "#!...perl" ), you must use the -x flag to tell perltidy not to parse and format any lines before the "hash-bang" line. This option also invokes perl with a -x flag when checking the syntax. This option was originally added to allow perltidy to parse interactive VMS scripts, but it should be used for any script which is normally invoked with "perl -x".

    Please note: do not use this flag unless you are sure your script needs it. Parsing errors can occur if it does not have a hash-bang, or, for example, if the actual first hash-bang is in a here-doc. In that case a parsing error will occur because the tokenization will begin in the middle of the here-doc.

  Debugging perltidy input

The --dump-... parameters
    The following flags are available for debugging. Note that all commands named --dump-... will simply write some requested information to standard output and then immediately exit.

    --dump-cuddled-block-list or -dcbl will dump to standard output the internal hash of cuddled block types created by a --cuddled-block-list input string.

    --dump-defaults or -ddf will write the default option set to standard output and quit

    --dump-integer-option-range or -dior will write a list of comma-separated values. Each line contains the name of an integer option along with its minimum, maximum, and default values.

    --dump-profile or -dpro will write the name of the current configuration file and its contents to standard output and quit.

    --dump-options or -dop will write current option set to standard output and quit.

    --dump-long-names or -dln will write all command line long names (passed to Get_options) to standard output and quit.

    --dump-short-names or -dsn will write all command line short names to standard output and quit.

    --dump-token-types or -dtt will write a list of all token types to standard output and quit.

    --dump-want-left-space or -dwls will write the hash %want_left_space to standard output and quit. See the section on controlling whitespace around tokens.

    --dump-want-right-space or -dwrs will write the hash %want_right_space to standard output and quit. See the section on controlling whitespace around tokens.

    See "Analyzing Code" for additional --dump- parameters.

Other parameters related to processing
    --no-memoize or -nmem will turn of memoizing. Memoization can reduce run time when running perltidy repeatedly in a single process. It is on by default but can be deactivated for testing with -nmem.

    --no-timestamp or -nts will eliminate any time stamps in output files to prevent differences in dates from causing test installation scripts to fail. There are just a couple of places where timestamps normally occur. One is in the headers of html files, and another is when the -cscw option is selected. The default is to allow timestamps (--timestamp or -ts).

    --file-size-order or -fso will cause files to be processed in order of increasing size, when multiple files are being processed. This is particularly useful during program development, when large numbers of files with varying sizes are processed, because it can reduce virtual memory usage. This is the default and can be deactivated with -nfso.

    --maximum-file-size-mb=n or -maxfs=n specifies the maximum file size in megabytes that perltidy will attempt to format. This parameter is provided to avoid causing system problems by accidentally attempting to format an extremely large data file. Most perl scripts are less than about 2 MB in size. The integer n has a default value of 10, so perltidy will skip formatting files which have a size greater than 10 MB. The command to increase the limit to 20 MB for example would be

      perltidy -maxfs=20

    This length test is applied to named files before they are read into memory. It is applied to files arriving from standard input after they are read into memory. It is not applied to character strings arriving by a call to the Perl::Tidy module.

Controls for when to stop processing
    --maximum-level-errors=n or -maxle=n specifies the maximum number of indentation level errors are allowed before perltidy skips formatting and just outputs a file verbatim. The default is n=1. This means that if the final indentation of a script differs from the starting indentation by more than 1 levels, the file will be output verbatim. To avoid formatting if there are any indentation level errors use -maxle=0. To skip this check you can either set n equal to a large number, such as n=100, or set n=-1.

    For example, the following script has level error of 3 and will be output verbatim

        Input and default output:
        {{{

        perltidy -maxle=100
        {
            {
                {

    --maximum-unexpected-errors=n or -maxue=n specifies the maximum number of unexpected tokenization errors are allowed before formatting is skipped and a script is output verbatim. The intention is to avoid accidentally formatting a non-perl script, such as an html file for example. This check can be turned off by setting n=0.

    A recommended value is n=3. However, the default is n=0 (skip this check) to avoid causing problems with scripts which have extended syntaxes.

Handling errors in options which take integer values
    Many of the input parameters take integer values. Before processing begins, a check is made to see if any of these integer parameters exceed their valid ranges. The default behavior when a range is exceeded is to write a warning message and reset the value to its default setting. This default behavior can be changed with the parameter --integer-range-check=n, or -irc=n, as follows:

        n=1  reset bad values to defaults but do not issue a warning
        n=2  reset bad values to defaults and issue warning [DEFAULT]
        n=3  stop if any values are out of bounds

    The value n=1 is mainly useful for testing purposes.

Debugging perltidy tokenization
    -DEBUG, -D will write a file with extension .DEBUG for each input file showing the tokenization of all lines of code. This can produce a lot of output and is mainly useful for debugging tokenization issues during perltidy development.

  Analyzing Code
Perltidy reports any obvious issues that are found during formatting, such as unbalanced braces. But several parameters are available for making certain additional checks for issues which might be of interest to a programmer. These parameters fall into two categories as indicated by their prefix, --dump- or --warn-:

•   The --dump- parameters read a file, write information to the standard output, and then exit without doing any formatting. All --dump- parameters must be on the command line, not in a .perltidyrc file, and they require a single file name on the command line.

•   The --warn- parameters, on the other hand, cause perltidy to function normally but issue warnings to the error output when certain conditions are encountered.

Some of these have associated control parameters.

Use --dump-block-summary to make a table of information on code blocks
    A table listing information about the blocks of code in a file can be made with --dump-block-summary, or -dbs. This causes perltidy to read and parse the file, write a table of comma-separated values for selected code blocks to the standard output, and then exit. Like all --dump- parameters, this must be on the command line, not in a .perltidyrc file, and it requires a single file name on the command line. For example

       perltidy -dbs somefile.pl >blocks.csv

    produces an output file blocks.csv whose lines hold these parameters:

      filename     - name of the file
      line         - line number of the opening brace of this block
      line_count   - number of lines between opening and closing braces
      code_lines   - number of lines excluding blanks, comments, and pod
      type         - block type (sub, for, foreach, ...)
      name         - block name if applicable (sub or asub name, label..)
      depth        - nesting depth of the opening block brace
      max_change   - change in depth to the most deeply nested code block
      block_count  - total number of code blocks nested in this block
      mccabe1      - McCabe complexity measure of this code block
      mccabe2      - modified: subs have anonymous sub complexity removed
      comment_lines - number of lines of comments or POD with some text

    This feature was developed to help identify complex sections of code as an aid in refactoring. The McCabe complexity measure, 'mccabe1', matches the definition used by Perl::Critic. The alternate complexity value, 'mccabe2', is the same except that for subroutines, the complexity of any contained anonymous subs is removed and shown separately. This alternate value can be more representative of the actual complexity, and sometimes much lower. For example, in one of the subs in perltidy the two values are 77 and 6. The difference is shared by the anonymous subs which it contains, of which the maximum is 36.

    By default the table contains these values for subroutines, but the user may request them for any or all blocks of code or packages. For blocks which are loops nested within loops, a postfix '+' to the "type" is added to indicate possible code complexity. Although the table does not otherwise indicate which blocks are nested in other blocks, this can be determined by computing and comparing the block ending line numbers.

    For subroutines, the number of call arguments (args) is listed in parentheses in the "type" column. For example, sub(9) indicates a sub with 9 args. Subroutines whose arg count cannot easily be determined are indicated as sub(*). The count includes any leading object passed in a method call (such as $self).

    Also for subroutines, the existence of comments or pod text before and after the call arg definition is indicated by hash symbols around the number of args. Thus, "sub(9#)" indicates a sub with 9 args with some comments following their definition. And "sub(#0)" indicates a sub with some leading comments or pod text but no call args.

    By default the table lists subroutines with more than 20 "code_lines", but this can be changed with the following two parameters:

    --dump-block-minimum-lines=n, or -dbl=n, where n is the minimum number of "code_lines" to be included. The default is -n=20. Note that "code_lines" is the number of lines excluding comments, blanks and pod.

    --dump-block-types=s, or -dbt=s, where string s is a list of block types to be included. The type of a block is either the name of the perl builtin keyword for that block (such as sub if elsif else for foreach ..) or the word immediately before the opening brace. In addition, there are a few symbols for special block types, as follows:

       if elsif else for foreach ... any keyword introducing a block
       sub  - any sub or anonymous sub
       asub - any anonymous sub
       *    - any block except nameless blocks
       +    - any nested inner block loop
       package - any package or class
       closure - any nameless block
       elsif3  - an if-elsif- chain with 3 or more elsif's (see below)

    A chain of if-elsif-... blocks may be reported as a single line item by entering the word elsif with an appended integer, as indicated by the last item in this list. The integer indicates the number of elsif blocks required for a chain to be reported. If you use this, you may want to also use -dbl=n, with a smaller number of lines n than the default.

    In addition, specific block loop types which are nested in other loops can be selected by adding a + after the block name. (Nested loops are sometimes good candidates for restructuring).

    The default is -dbt='sub'.

    In the following examples a table "block.csv" is created for a file "somefile.pl":

    •   This selects both "subs" and "packages" which have 20 or more lines of code. This can be useful in code which contains multiple packages.

            perltidy -dbs -dbt='sub package' somefile.pl >blocks.csv

    •   This selects blocks with 2 or more code lines which are type "sub" or which are inner loops.

            perltidy -dbs -dbl=2 -dbt='sub +' somefile.pl >blocks.csv

    •   This selects every block and package.

            perltidy -dbs -dbl=1 -dbt='* closure' somefile.pl >blocks.csv

    •   This selects every if-chain which contains 2 or more "elsif" blocks:

            perltidy -dbs -dbl=1 -dbt='elsif2' somefile.pl >blocks.csv

    •   This selects every "while" block with 6 or more code lines

            perltidy -dbs -dbt=while -dbl=6 somefile.pl >while.csv

Use --dump-unusual-variables to find unused, reused, and certain other variables of interest
    Variables with certain properties of interest to a programmer can be listed with --dump-unusual-variables or -duv. This parameter must be on the command line, along with a single file name. It causes perltidy to scan the file for certain variable types, write any found to the standard output, and then immediately exit without doing any formatting. For example

        perltidy -duv somefile.pl >vars.txt

    produces a file with lines which look something like

        1778:u: my $input_file
        6089:r: my $j: reused - see line 6076

    The values on the line are separated by colons and have the following meaning:

        line number   - the number of the line of the input file
        issue         - a single letter indicating the issue, see below
        variable name - the name of the variable, preceded by a keyword
        note          - an optional note referring to another line

    If there are a large number of issues it can be convenient to read the file into a spreadsheet.

    The checks are made for variables introduced by the keywords my, state, and our, along with variables defined with use vars and use constant. It is a good idea to also set use strict in a script so that Perl itself can find issues with variables which appear in a script without one of these methods.

    The types of checks which are made are identified in the output with one of the letters r, s, p, u, and c as follows:

    r: reused variable name
        These are variables which are re-declared in the scope of a variable with the identical name. This can be confusing, perhaps not when the code is first written, but possibly later during maintenance work. For example, this can make it difficult to locate the correct variable with an editor when changes are being made. This issue can be avoided by renaming one of the conflicting variables. Note that this is similar to the Perl::Critic policy Variables::ProhibitReusedNames.

    s: sigil change but reused bareword
        These are variables which have the same bareword name but a different sigil ($, @, or %) as another variable in the same scope. For example, this occurs if variables $data and %data share the same scope. This can also be confusing for the reasons mentioned above and can be avoided by renaming one of the variables.

    p: package-crossing variables
        These are lexical variables which are declared in one package and still visible in subroutines of a different package in the same file. This can be confusing, and it might cause the program to run differently, or fail, if the packages were ever split into separate files. This issue can usually be avoided by placing code in block braces of some type. For example, this issue is often found in test code and can sometimes be fixed by using the structure

            main();

            sub main { #<<<
            ## old main code goes here
            }

        The non-indenting-braces side comment "#<<<" is not required but will keep the indentation of the old code unchanged.

        This check is only applied to package statements which are not enclosed in block braces. This avoids warnings at temporary package changes.

    u: unused variables
        These are lexical variables declared with "my" or "state" (but not "our") and not referenced again within their scope. Calling them unused is convenient but not really accurate; this is a "gray area" for a program. There are some good reasons for having such variables. For example, they might occur in a list of values provided by another routine or data structure, and therefore must be listed, even though they might not be referenced again. Having such variables can make them immediately available for future development and debugging, and can be beneficial for program clarity.

        But sometimes they can occur due to being orphaned by a coding change, due to a misspelling, or by having an unintentional preceding "my". So it is worth reviewing them, especially for new code. Here is an example of an unused variable in a script located with this method:

           BEGIN { my $string = "" }
           ...
           $string .= "ok";

        This looks nice at first glance, but the scope of the "my" declaration is limited to the surrounding braces, so it is not the same variable as the other $string and must therefore be reported as unused. This particular problem would have also been caught by perl if the author had used "strict".

    c: unused constants
        These are names which are declared with a "use constant" and a reference was not seen again within their package. They might be needed by an external package, or a set of standard definitions, or available for future development. And in some unusual cases a reference may have been missed by perltidy. But they might also be unused remnants from code development, or due to a misspelling, so it can be worthwhile reviewing them.

    Exception: The following our variables are exempt from warnings: $VERSION, @EXPORT, @EXPORT_OK, %EXPORT_TAGS, @ISA, $AUTOLOAD.

Use --warn-variable-types to warn about certain variable types
    The flag --warn-variable-types=string, or -wvt=string, is the --warn counterpart to --dump-unusual-variables, and can be used to produce a warning message if certain of the above variable types are encountered during formatting. All possible variable warnings may be requested with -wvt='*' or -wvt=1.

    For example,

       perltidy -wvt='*' somefile.pl

    The default is not to do any of these checks, and it can also be indicated with -wvt=0.

    To restrict the check to a specific set warnings, set the input string to be a space-separated or comma-separated list of the letters associated with the types of variables to be checked. For example:

       perltidy -wvt='s r' somefile.pl

    will process somefile.pl normally but issue a warning if either of the issues s or r, described above, are encountered.

    A companion flag, --warn-variable-exclusion-list=string, or -wvxl=string, can be used to skip warning checks for a list of variable names. A leading and/or trailing '*' may be placed on any of these variable names to allow a partial match.

    For example,

       perltidy -wvt=1 -wvxl='$self $class *_unused'  somefile.pl

    will do all possible checks but not report any warnings for variables $self, $class, and for example $value_unused.

    This partial match option provides a way to trigger a warning message when a new unused variable is detected in a script. This can be accomplished by adding a unique suffix to the names of existing unused variables, such as "_unused". This suffix is then added to the exclusion list.

    As a specific example, consider the following line which is part of some debug code which only references the latter three variables (but might someday need to reference the package variable too).

        my ( $package_uu, $filename, $line, $subroutine ) = caller();

    The unused variable, $package_uu, has been specially marked with suffix "_uu". No type u (unused variable) warning will be produced provided that this wildcard suffix is in the exclusion list:

        -wvxl='*_uu'

Use --dump-unique-keys to help locate misspelled hash keys
    The parameter --dump-unique-keys, or -duk, dumps a list of hash keys which appear to be used just once, and do not appear among the quoted strings in a file. For example:

       perltidy -duk File.pm >output.txt

    The lines in the output file list unique keys and line numbers.

    Many programs contain sets of hash keys which are largely unique to that program but which are used for communication with other programs. A filter is used to avoid listing such keys. This filter is described in the next section.

    A program "dump_unique_keys.pl" at <https://github.com/perltidy/perltidy/tree/master/examples> can run perltidy with -duk on multiple files, and then remove any common keys from the list.

Use --warn-unique-keys-cutoff=N, or -wukc=N, to adjust the unique keys filter.
    This parameter controls the filter used by both --dump-unique-keys and its counterpart --warn-unique-keys, described below. The filter works as follows: if a related set of keys has more than N unique keys, then none of them are listed. The default value is N=1, which causes the minimum number of keys to be reported. Increasing N above 1 will allow more unique keys to be reported.

    Thus, a value N=1 will catch up to 1 error per set of related keys. A value N=2 will catch up to two errors per set, but at the same time may produce more unwanted warnings.

    For the special case N=1 some extra filtering is done to minimize unwanted warnings. For examples, unique keys in ALL CAPS are not reported for N=1.

Use --warn-unique-keys to warn of possible misspelled hash keys
    The parameter --warn-unique-keys, or -wuk, can be used to produce a warning of a possible misspelled hash key during normal processing. It works like the previous -dump version but writes to the standard error output if unique keys are found during normal formatting.

    For some scripts, this will produce unwanted warnings for a few keys, even though the filter described above attempts to avoid this. A way to avoid warnings for specific keys is to list them somewhere in the program in a qw list. This will be seen during the key scan, and the then keys will not be considered unique.

Use --dump-similar-keys to help locate misspelled hash keys
    The parameter --dump-similar-keys, or -dsk, provides another way to help locate errors in hash keys. It dumps a list of hash keys which are very similar but different. For example:

       perltidy -dsk File.pm >output.txt

    The lines in the output file contain pairs of similar keys, and the number of times each was found in the file. For example, the following line is from an actual script:

       recieve,receive,2,6

    This tells us that the key "recieve" (a spelling error) occurs 2 times and the correct key "receive" occurs 6 times:

    Note that if this error had occurred just once then it could have also been found with --dump-unique-keys or --warn-unique-keys. But since it occurs more than once, the --dump-similar-keys option or its --warn- version is needed to locate it.

Use --warn-similar-keys, or -wsk, to warn of hash keys which are similar but different.
    This is the like the --dump-similar-keys option but writes to the error output file during normal formatting.

    In most cases, the warnings will be for perfectly valid hash keys. So this parameter is probably most useful for occasional debugging. See "Creating a new abbreviation" for a convenient way to include it in a .perltidyrc.

Controls for --dump-similar keys and --warn-similar-keys
    The default parameters which control the search for similar keys should be normally be adequate, but they can be modified if necessary. They are as follows:

    --similar-keys-maximum-difference=n, or -skmd=n, specifies the maximum difference between two keys for similarity.
        The integer n gives the maximum number of differences to use when checking for hash key similarity. The default is n=1. The basic rules are that one difference is counted for each of the following conditions:

        •   a change in case of a letter, any number of times, such as "LENGTH, length". This is implemented by making comparisons with lower case copies of the strings if any case change is detected.

        •   one or more same-character changes, such as "number-of-lines, number_of_lines". This is implemented by remembering any change such as - to _ in this example, and counting it just once.

        •   transposed characters, such as "recieve, receive"

        •   a missing or extra character, such as "color, colour" or "color, _color"

        •   any other character difference, such as "transparent, transparant"

        To help filter out unwanted matches, an additional rule is that one extra difference is counted if the leading letters are different when we ignore their case.

        For example, "_xmin, _Xmin" has a difference of one because of the case change, but the first letter is the same except for the case change. So the difference is one and this pair will be reported with the default setting n=1.

        On the other hand, the pair "_xmin, _ymin" has a different first letter which is not due to a case change, so the total difference score is 2, and it will not be reported with the default setting n=1. And this type of difference is unlikely to be an error.

        So the default value -skmd=1 will catch most common errors without producing excessive output, but for a more thorough check it can be increased to n=2.

        Values greater than 2 can produce a large amount output, so rather than use higher values, it might be better to dump all of the keys and examine them with the --dump-hash-keys parameter described below.

    --similar-keys-minimum-length=n, or -skml=n, defines a minimum hash key length.
        Hash keys with fewer than n characters will be ignored when checking for similar keys. The default is n=4.

    --similar-keys-maximum-pairs=n, or -skmp=n, defines the maximum number of similar pairs to display
        Each similar pair found is displayed on one line of output, so this is equivalent to the maximum number of output lines. The default is 25.

Use --dump-hash-keys to dump a list of hash keys
    The parameter --dump-hash-keys, or -dhk, dumps a list of all hash keys found by perltidy to the standard output and exits. It can produce a lot of output, but it might be useful as a last resort when searching for a hash key problem. For example:

       perltidy -dhk File.pm >output.txt

    The lines in the output file list the keys and number of occurrences.

Use --dump-mixed-call-parens to find functions called both with and without parens
    The parameter --dump-mixed-call-parens, or -dmcp, provides information on the use of call parens within a program. It produces a list of keywords and sub names which occur both with and without parens. In other words, with a mixed style. This might be useful if one is working to standardize the call style for some particular keyword or function. For example,

       perltidy -dmcp somefile.pl >output.txt

    will analyze the text of somefile.pl, write the results to output.txt, and then immediately exit (like all dump- parameters).

    The output shows a list of operators and the number of times they were used with parens and the number of times without parens. For example, here is a small section of the output from one file in a past Perl distribution:

        k:length:17:9
        k:open:30:9
        k:pop:3:4

    The first line shows that the "length" function occurs 17 times with parens and 9 times without parens. The 'k' indicates that "length" is a Perl builtin keyword ('U' would mean user-defined sub, and 'w' would mean unknown bareword). So from this partial output we see that the author had a preference for parens around the args of "length" and "open", whereas "pop" was about equally likely to have parens as not.

    More detailed information can be obtained with the parameters described in the next section.

Use --want-call-parens=s and --nowant-call-parens=s to warn about specific missing or extra call parens
    The parameter --want-call-parens=s, or -wcp=s, can be used to produce a warning message if call parens are missing from selected functions. Likewise, --nowant-call-parens=s, or -nwcp=s, can warn if call parens exist for selected functions. When either of these parameters are set, perltidy will report any discrepancies from the requested style in its error output.

    Before using either of these parameters, it may be helpful to first use --dump-mixed-call-parens=s, described in the previous section, to get an overview of the existing paren usage in a file.

    The string arguments s are space-separated lists of the names of the functions to be checked. The function names may be builtin keywords or user-defined subs. They may not include a package prefix or sigil. To illustrate,

       perltidy -wcp='length open' -nwcp='pop'   somefile.pl

    means that the builtin functions "length" and "open" should have parens around their call args but "pop" should not. The error output might contain lines such as:

        2314:open FD_TO_CLOSE: no call parens
        3652:pop (: has call parens
        3783:length $DB: no call parens
        ...

    For builtin keywords which have both a block form and a trailing modifier form, such as "if", only the trailing modifier form will be checked since parens are mandatory for the block form.

    The symbol & may entered instead of a function name to mean all user-defined subs not explicitly listed. So the compact expression

       perltidy -wcp='&' somefile.pl

    means that calls to all user-defined subs in the file being processed should have their call arguments enclosed in parens.

    A less strict check for parens can be requested by placing the symbol + after keyword or function name in the list following -wcp. This means that a warning should only be issued if that word is followed without parens around more than one comma-separated terms. For example,

       perltidy -wcp='return+'

    means that no warnings will be given for the following lines:

      return;           # OK: 0 items, no parens needed
      return $x;        # OK: 1 item, no parens needed
      return ($x, $y);  # OK: 2 items, need parens

    Similarly, a less strict check for unwanted parens be requested by placing the symbol + after keyword or function name in the list following -nwcp. This means that a warning should only be issued if that word is followed by empty parens or parens around a single term.

    These less restrictive warnings may be used together. For example, the following

       perltidy -wcp='for+' -nwcp='for+'

    means that parens should be around for lists of more than one item, and otherwise not. For example:

       print "$_\n" for @list;    # OK: -nwcp is happy
       print "$_\n" for ( 1, 2, 3, 5, 9 ); # OK: -wcp is happy

    When the same word occurs like this in both the -wcp and -nwcp lists, the + signs may be omitted, since no other interpretation makes sense. So the above could also be written as

       perltidy -wcp='for' -nwcp='for'

    NOTE: Perltidy does not have the ability to add or delete call parens because it is difficult to automate, so changes must be made manually. When adding or removing parentheses, it is essential to pay attention to operator precedence issues. For example, if the parens in the following statement are removed, then "||" must be changed to "or":

        open( IN, "<", $infile ) || die("cannot open $infile:$!\n");

    Otherwise, the "||" will operate on $infile rather than the return value of "open".

Use --dump-mismatched-args, or -dma to find function calls with args not matching sub declarations
    The parameter --dump-mismatched-args, or -dma, causes perltidy to examine the definitions of subroutines in a file, and calls to those subs, and report certain differences. Like all --dump commands, it writes its report to standard output and exits immediately. For example

        perltidy -dma somefile.pl >results.txt

    Four types of issues are reported, types a, o, u, and i:

    a: calls made to a sub both with and without the arrow operator
        For example the following two lines would be reported as a mismatch:

             Fault();

        and

             $self->Fault();

        This may or may not be an error, but it is worth checking. It might become an error in the future if sub "Fault" starts to access $self.

    o: (overcount): the number of call args exceeds the expected number.
    u: (undercount): the number of call args is less than the expected number.
        For example

             sub gnab_gib {
                 my $self=shift;
                 my ($v1,$v2)=@_;
                 ...
             }

             $self->gnab_gib(42);

        In this case, the sub is expecting a total of three args ($self, $v1, and $v2) but only receives two ($self and 42), so an undercount is reported. This is not necessarily an error because the sub may allow for this possibility, but it is worth checking.

        Although it is not possible to automatically determine which sub args are optional, if optional sub args are enclosed in an extra set of parentheses, perltidy will take this a signal that they are optional and not issue a warning. So if the above example is written as

            sub gnab_gib {
                my $self = shift;
                my ( $v1, ($v2) ) = @_;  # <-- $v2 is optional
                ...;
            }

        then perltidy will consider that the second arg is optional and not issue a warning for:

            $self->gnab_gib(42);

        For multiple default call args, place one set of parens around them all. Some examples:

            my ( ($v1) ) = @_;              # <-- $v1 is optional
            my ( $v1, ( $v2, $v3 ) ) = @_;  # <-- $v2, $v3 are optional

    i: indeterminate: a specific number of expected args for a sub could not be determined, but it is called with a specific number. This issue is reported for the --dump- option but not the --warn- option.

    Notes and Limitations:

    •   This option works best for subs which unpack call args in an orderly manner near the beginning of the sub from @_ and/or with "shift" operations. It will also work for direct access to specific elements of the @_ array. However if the coding for arg extraction is complex then the number of sub args will be considered indeterminate and a count cannot be checked.

    •   Sub calls made without parentheses around the args are not checked.

    •   Anonymous subs and lexical subs (introduced with "my") are not checked.

    •   Only calls which appear to be to subs defined within the file being processed are checked. But note that a file may contain multiple packages.

Use --warn-mismatched-args, or -wma, to produce a warning for function calls with args not matching sub declarations.
    This is similar to the -dump parameter described above except that any mismatches are reported in the error file and otherwise formatting continues normally. The basic usage is

        perltidy -wma somefile.pl

    Several companion controls are available to avoid unwanted error messages:

    •   --warn-mismatched-arg-types=s, or -wmat=s, can be used to select specific tests, type a (arrow test) or o (overcounts) or u (undercounts). All checks may be requested with -wmat='*' or -wmat=1. This is the default.

        To restrict the check to a specific warning type, set the string equal to the letter of that warning, any a, o, or u. For example

           perltidy -wma -wmat='a o' somefile.pl

        will format somefile.pl and report any arrow-type mismatches and overcount mismatches, but will skip undercount mismatches.

    •   --warn-mismatched-arg-exclusion-list, or -wmaxl=string, can be given to skip the warning checks for a list of subroutine names, entered as a quoted string of space- or comma-separated names, without a package prefix. All subs with those names will be skipped, regardless of package. A leading and/or trailing * on a name may be used to indicate a partial string match.

    •   --warn-mismatched-arg-undercount-cutoff=n, or -wmauc=n, can be used to avoid undercount warnings when the expected number of args is less than n. Please note that this number n is the number of args from the point of view of the sub definition, so an object like $self passed with an arrow operator counts as one arg.

        The default value is n=4. This has been found to allow most programs to pass without warnings, but it should be reduced if possible for better error checking. The minimum possible value of n needed to avoid triggering an error for a program can be determined by running with -wma -wmauc=0. If there are undercount errors, a note at the bottom of the error output indicates the value of n required to avoid reporting them.

        As noted above for the parameter --dump-mismatched-args, if optional call args are enclosed in separate parentheses, then perltidy will recognize them as optional args and avoid needless warnings. If this method is used, then -wmauc=0 should be used for maximal checking.

    •   --warn-mismatched-arg-overcount-cutoff=n, or -wmaoc=n, can be used to avoid overcount warnings when the expected number of args is less than n. The default value is n=1. This avoids warning messages for subroutines which are dummy placeholders for possible expansion.

    To illustrate these controls,

       perltidy -wma -wmat='o u' -wmaxl='new old' -wmauc=2 somefile.pl

    means format somefile.pl as usual and check for mismatched overcounts and undercounts but not arrows. Skip checking for any sub named "new" or "old", and only warn of undercounts for subs expecting more than 2 args.

Use --dump-mismatched-returns to find function calls where the number of requested values may disagree with sub return statements
    The parameter --dump-mismatched-returns, or -dmr, examines the return side of sub call statements. Like all --dump commands, it writes its report to standard output and exits immediately. For example

        perltidy -dmr somefile.pl >results.txt

    The following types of issues are reported:

    x: calls requesting an array from a sub with no return statements.
    y: calls requesting a scalar from a sub with no return statements.
    o: (overwant): calls requesting an array with a count which exceeds the maximum number returned by the sub.
    u: (underwant): calls requesting an array with a count which is below the maximum and which does not match a number returned by the sub.
    s: calls requesting a scalar from a sub which only returns two or more items.
    m: multiple array return sizes.

    Most of these issue types are illustrated with the following code

        sub macho {
            ...
            ( $name, $flags ); # 2 values but no 'return' statement
        }

        ( $name, $flags ) = macho();  # 'x' (want array, but no return)
        $name = macho();              # 'y' (want scalar but no return)

        sub wimp {
            ...;
            return ( $name, $flags );  # 2 values with 'return' statement
        }

        ( $name, $flags, $access) = wimp(); # 'o' (want array 3 > 2)
        ($name) = wimp();                   # 'u' (want array 1 < 2)
        $name   = wimp();  # 's' (want scalar but 2 values returned)

    The type m issue occurs when a sub has multiple returns of finite lists with different counts greater than 1, and not all of them are matched with calls. For example:

        sub find_libs {
            ...;
            return ( $libjava, $libjvm, $libhpi, $libawt );  # 4 items
            ...;
            return ( $libjava, $libawt );                    # 2 items
        }
        my ( $libjava, $libjvm, $libhpi, $libawt ) = find_libs();

    This analysis works by scanning all call statements and all sub return statements, and comparing the number of items wanted with the possible number of items returned. If a specific value for either of these numbers cannot be determined for a call then it cannot be checked.

    Since only return statements are scanned for return values, this analysis will not be useful for programming which relies on the default return mechanism, as in the first sub above. Note that the Perl::Critic policy RequireFinalReturn can be used to check for code in this situation.

    Reported issues are not necessarily errors, but they might be, or they might indicate potentially confusing code.

Use --warn-mismatched-returns, or -wmr, to issue warnings when the number of requested values may disagree with sub return statements
    This is similar to the -dump parameter described above except that any mismatches are reported in the error file and otherwise formatting continues normally. The basic usage is

        perltidy -wmr somefile.pl

    The following companion controls are available to avoid unwanted error messages:

    •   --warn-mismatched-return-types=string, or -wmrt=string, can be used to limit checks.

        To restrict the checking, set the string equal to the letter(s) of that warning, any x, y, o, u, or s. For example

           perltidy -wmr -wmrt='x o s' somefile.pl

        will format somefile.pl and report issue types x, o, and s but not types u and y. All checks may be requested with -wmrt='*' or -wmrt=1. This is the default if this parameter is not specified.

    •   --warn-mismatched-return-exclusion-list, or -wmrxl=string, can be given to skip the warning checks for a list of subroutine names, entered as a quoted string of space- or comma-separated names, without a package prefix. All subs with those names will be skipped, regardless of package. A leading and/or trailing * on a name may be used to indicate a partial string match.

Use --dump-nested-ternaries, or -dnt to dump a list nested ternaries.
    Like other -dump- commands, this writes to the standard output and then exits immediately, without doing any formatting. A ternary statement has the form

      Condition ? Value_if_true : Value_if_false

    If the term "Value_if_true" is itself a ternary, then that ternary is itself nested one level deeper. Nested ternaries are relatively easy to create but can be tedious to read. And sometimes they can be rewritten in a simpler way.

    This parameter checks the nesting depth of each ternary in a script and, if it is not zero, then its line number and nesting depth are listed in the output. The list may be limited to ternaries with a depth greater than a certain value with the next parameter.

Use --nested-ternary-maximum-depth=n, or -ntmd=n, to ignore ternaries nested to a depth of n or less.
    Ternary statements with a depth less than or equal to n are ignored by --dump-nested-ternaries and its companion --warn-nested-ternaries. The default value n=0 will cause all nested ternaries to be listed. A value n=1, for example, will cause ternaries with a depth of 0 or 1 to be ignored by these commands.

Use --warn-nested-ternaries, or -wnt, to write a warning when a nested ternary is encountered.
    This is the same as the -dump parameter described above except that any nested ternaries are reported in the error file and formatting continues normally.

    Additional comments on nested ternaries:

    •   The nesting depth of an arbitrary ternary can be found by writing a list of just the "?" and ":" symbols of the entire expression, along with any container brackets which completely enclose any of them. Then the nesting depth of the "?" which introduces a ternary is the number of "?" symbols which immediately precede it. For example, for this statement which gives the maximum of three values

                $a > $b ? $a > $c ? $a : $c : $b > $c ? $b : $c;

        we get

                ? ? : : ? :

        Since there is a sequence of two adjacent "?" symbols, the maximum nesting depth is 2-1=1.

    •   Parentheses around a term cause its depth to be reset to zero. The parentheses might be for a function call, or just for grouping. So one way to avoid a warning for a certain ternary is to introduce parentheses. For example, modifying the above example to be

                $a > $b ? ( $a > $c ? $a : $c ) : $b > $c ? $b : $c;

        we get

                ? ( ? : ) : ? :

        In this case, there are no adjacent "?" symbols, so the nesting depth is zero.

    •   Note that in the following diagram, if "Value_if_true" is a nested ternary, and "Value_if_false" is not, then inverting the "Condition" test can produce a more-readable linear chain of tests, similar to an if-elsif- chain.

          Condition ? Value_if_true : Value_if_false

Use --warn-c-style-for-loops to write a warning for C-style for loops
    When the parameter --warn-c-style-for-loops, or -wcsfl, is set, any C-style for loops are listed in the error output stream. These loops have the form

        for (my $i = 0; $i < 5; $i++) {
            print "Value: $i\n";
        }

    They can often be converted into a more readable list-oriented loop. This parameter can be set if the policy is not to use them.

    Note that this parameter is similar to the Perl::Critic policy ControlStructures::ProhibitCStyleForLoops.

    The dump version of this option, --dump-c-style-for-loops, or -dcsfl, can be used to dump a list of such loops to the standard output for a code review.

Use --dump-keyword-usage to dump a list of keywords used
    By default, the parameter --dump-keyword-usage, or -dku, will write a list of perl builtin keywords used in a file, along with the count and the line numbers of the first and last occurrence. This list can be read into a spreadsheet for sorting. The list includes all builtin perl keywords which are used in a file, including quote-like operators " qq qx qr tr q s y m ` (backtick) ". This list can be changed with the next parameter.

Use --dump-keyword-usage-list=s to select keywords to be dumped.
    The parameter --dump-keyword-usage-list=s, or -dkul=s, supplies a list of either builtin keywords or user function names for the previous parameter, -dku. If this list includes a '*' then all builtin keywords will be included plus any words in this list. Otherwise, just the words in this list will be included.

    For example:

      perltidy -dku -dkul='goto system qx fileparse' ifile >ofile

    will dump a list of information on the occurrences of just the perl builtin keywords "goto", "system", and "qx", plus a function named "fileparse".

    The treatment of module paths in function names is as follows:

    •   If the list contains a bare word, like "fileparse" as above, and input file contains calls written both with and without module paths, such as "File::Basename::fileparse" and just "fileparse", then all versions will be listed, but on separate output lines in the dump.

    •   If instead the input list had been expressed with a full module name path, such as "File::Basename::fileparse", then only function calls exactly matching that full module path would be included in the output.

Use --warn-keyword-list=s, or -wkl=s to warn of the use of selected keywords or functions
    This parameter is the --warn- version of the previous --dump- parameters. It causes a warning to be issued if any of the builtin keywords or functions listed in the string s occur in a file. For example,

      perltidy -wkl='goto system qx fileparse' ifile

    will format ifile and issue a warning on the occurrences of the perl builtin keywords "goto", "system", and "qx", or a function named "fileparse".

Use --warn-label-types=s, or -wlu=s to warn of selected label issues
    The parameter -wlu=s provides some simple checks which can help screen for potential problems with statement labels.

    Statement labels are very useful for controlling program flow, but their use also introduces a vulnerability which should be considered. This is because labels are global in scope, and when perl has an unresolved reference to a label it looks up the call stack for a match, even if it is in another module or file. If this is not intended it will not end well, especially if an unintended label is found. Such an event can be very difficult to debug, especially if it is triggered by a rare condition. This can happen for example with a simple spelling error.

    The string s indicates which issues should be checked, as follows:

    c: a label which is not all capital letters
    r: a label which is reused
    u: a label which is unused (not referenced)
    m: a label which is referenced but missing

    Use either commas or spaces to separate multiple items. For example

      perltidy -wlt='c m' somefile.pl

    will format somefile.pl and also issue a warning if issues c or m are found.

    All possible checks may be specified with -wlt='*' or -wlt=1. The default is not to do any of these checks, and it can also be indicated with -wlt=0.

Use --warn-label-exclusion-list, or -wlxl=string, to skip warning checks for specific labels.
    The string may contain a list, entered as a quoted string of space- or comma-separated labels. A leading and/or trailing * on a name may be used to indicate a partial string match. Warnings for the following label names used by Test::More are always excluded: SKIP and TODO.

Use --dump-label-usage to dump a list of labels used
    The parameter --dump-label-usage, or -dlu, will write a list of statement labels defined in a file along with the following associated items: (1) the line number of first occurrence, (2) the number of occurrences, (3) the number of references, (4) a note on any of the above issues.

    For example,

       perltidy -dlu somefile.pl >results.txt

    All labels and potential issues are listed in the dump.

Use --warn-unexpected-code-container to warn of misplaced code statements
    The parameter --warn-unexpected-code-container, or -wucc, causes extra checks to be made for code tokens such as semicolons within containers where they would produce a syntax error. This parameter is true by default, but can be turned off with -nwucc in case incorrect warnings are produced for modules which extend standard perl syntax.

  Working with MakeMaker, AutoLoader and SelfLoader
The first $VERSION line of a file which might be eval'd by MakeMaker is passed through unchanged except for indentation. The default --pass-version-line, or -pvl, is to do this. Use --nopass-version-line, or -npvl, to deactivate this feature.

If the AutoLoader module is used, perltidy will continue formatting code after seeing an __END__ line. The default --look-for-autoloader, or -lal, is to do this. Use --nolook-for-autoloader, or -nlal, to deactivate this feature.

Likewise, if the SelfLoader module is used, perltidy will continue formatting code after seeing a __DATA__ line. The default --look-for-selfloader, or -lsl, is to do this. Use --nolook-for-selfloader, or -nlsl, to deactivate this feature.

HTML OPTIONS

The -html master switch
    The flag -html causes perltidy to write an html file with extension .html. So, for example, the following command

            perltidy -html somefile.pl

    will produce a syntax-colored html file named somefile.pl.html which may be viewed with a browser.

    Please Note: In this case, perltidy does not do any formatting to the input file, and it does not write a formatted file with extension .tdy. This means that two perltidy runs are required to create a fully reformatted, html copy of a script.

The -pre flag for code snippets
    When the -pre flag is given, only the pre-formatted section, within the "<PRE"> and "</PRE"> tags, will be output. This simplifies inclusion of the output in other files. The default is to output a complete web page.

The -nnn flag for line numbering
    When the -nnn flag is given, the output lines will be numbered.

The -toc, or --html-table-of-contents flag
    By default, a table of contents to packages and subroutines will be written at the start of html output. Use -ntoc to prevent this. This might be useful, for example, for a pod document which contains a number of unrelated code snippets. This flag only influences the code table of contents; it has no effect on any table of contents produced by pod2html (see next item).

The -pod, or --pod2html flag
    For code which contains pod documentation, there are two formatting options:

    •   Use -npod, or --nopod2html, if the pod documentation should not have special formatting. It will be displayed in italics (or whatever the stylesheet indicates), without special html markup. This is useful, for example, if pod is being used as an alternative way to write comments, or if it is confusing to have both code and documentation formatted in a single file.

    •   Use -pod, or --pod2html, if the pod documentation should be formatted with a pod-to-html formatter. This is the Default. In this case, any code sections are formatted by perltidy, and the results then merged. The pod formatter which is used can be controlled with the parameter described in the next section.

        NOTE: Perltidy counts the number of "=cut" lines, and either moves the pod text to the top of the html file if there is one "=cut", or leaves the pod text in its original order (interleaved with code) otherwise.

Use --use-pod-formatter=s, or -upf=s to select a preferred pod formatter
    Perltidy will by default search for a pod formatter in the following order:

    •   Pod::Simple::XHTML

    •   Pod::Simple::HTML

    •   Pod::Html

    Older versions of perl should at least have Pod::Html, and newer versions will have all of them. The formatter which is actually selected when -html is used can be found by adding the -log parameter to create a .LOG file with this information.

    The default is usually the best choice. But if a different formatter is available and preferred, it can be selected by setting --use-pod-formatter=s, where s is the name of one of the above three formatters. For example, if for some reason Pod::Simple::HTML is selected by default and not working correctly, the older formatter Pod::Html could be selected with

      --use-pod-formatter='Pod::Html'

Some notes on the Pod::Html formatter
    Pod::Html is the oldest pod formatter and is normally available on all installations. However it has some limitations and issues which make the Pod::Simple formatters preferable.

    One of the problems with Pod::Html is that perltidy must create a temporary file when Pod::Html is used; see "FILES". Temporary files are not needed with either of the Pod::Simple formatters.

    Most of the flags accepted by the "pod2html" utility may be included in the perltidy command line, and they will be passed to Pod::Html::pod2html. In some cases, the flags have a prefix "pod" to emphasize that they are for the "pod2html", and this prefix will be removed before they are passed to "pod2html". The flags which have the additional "pod" prefix are:

       --[no]podheader --[no]podindex --[no]podrecurse --[no]podquiet
       --[no]podverbose --podflush --[no]podbacklink

    The flags which are unchanged from their use in "pod2html" are:

       --cachedir=s --htmlroot=s --libpods=s --title=s
       --podpath=s --podroot=s

    where 's' is an appropriate character string. Not all of these flags are available in older versions of Pod::Html. See your Pod::Html documentation for more information.

The -frm, or --frames flag
    By default, a single html output file is produced. This can be changed with the -frm option, which creates a frame holding a table of contents in the left panel and the source code in the right side. This simplifies code browsing. Assume, for example, that the input file is MyModule.pm. Then, for default file extension choices, these three files will be created:

     MyModule.pm.html      - the frame
     MyModule.pm.toc.html  - the table of contents
     MyModule.pm.src.html  - the formatted source code

    Obviously this file naming scheme requires that output be directed to a real file (as opposed to, say, standard output). If this is not the case, or if the file extension is unknown, the -frm option will be ignored.

The -text=s, or --html-toc-extension flag
    Use this flag to specify the extra file extension of the table of contents file when html frames are used. The default is "toc". See "Specifying File Extensions".

The -sext=s, or --html-src-extension flag
    Use this flag to specify the extra file extension of the content file when html frames are used. The default is "src". See "Specifying File Extensions".

The -hent, or --html-entities flag
    This flag controls the use of Html::Entities for html formatting. By default, the module Html::Entities is used to encode special symbols. This may not be the right thing for some browser/language combinations. Use --nohtml-entities or -nhent to prevent this.

Style Sheets
    Style sheets make it very convenient to control and adjust the appearance of html pages. The default behavior is to write a page of html with an embedded style sheet.

    An alternative to an embedded style sheet is to create a page with a link to an external style sheet. This is indicated with the -css=filename, where the external style sheet is filename. The external style sheet filename will be created if and only if it does not exist. This option is useful for controlling multiple pages from a single style sheet.

    To cause perltidy to write a style sheet to standard output and exit, use the -ss, or --stylesheet, flag. This is useful if the style sheet could not be written for some reason, such as if the -pre flag was used. Thus, for example,

      perltidy -html -ss >mystyle.css

    will write a style sheet with the default properties to file mystyle.css.

    The use of style sheets is encouraged, but a web page without a style sheets can be created with the flag -nss. Use this option if you must to be sure that older browsers (roughly speaking, versions prior to 4.0 of Netscape Navigator and Internet Explorer) can display the syntax-coloring of the html files.

Controlling HTML properties
    Note: It is usually more convenient to accept the default properties and then edit the stylesheet which is produced. However, this section shows how to control the properties with flags to perltidy.

    Syntax colors may be changed from their default values by flags of the either the long form, -html-color-xxxxxx=n, or more conveniently the short form, -hcx=n, where xxxxxx is one of the following words, and x is the corresponding abbreviation:

          Token Type             xxxxxx           x
          ----------             --------         --
          comment                comment          c
          number                 numeric          n
          identifier             identifier       i
          bareword, function     bareword         w
          keyword                keyword          k
          quote, pattern         quote            q
          here doc text          here-doc-text    h
          here doc target        here-doc-target  hh
          punctuation            punctuation      pu
          parentheses            paren            p
          structural braces      structure        s
          semicolon              semicolon        sc
          colon                  colon            co
          comma                  comma            cm
          label                  label            j
          sub definition name    subroutine       m
          pod text               pod-text         pd

    A default set of colors has been defined, but they may be changed by providing values to any of the following parameters, where n is either a 6 digit hex RGB color value or an ascii name for a color, such as 'red'.

    To illustrate, the following command will produce an html file somefile.pl.html with "aqua" keywords:

            perltidy -html -hck=00ffff somefile.pl

    and this should be equivalent for most browsers:

            perltidy -html -hck=aqua somefile.pl

    Perltidy merely writes any non-hex names that it sees in the html file. The following 16 color names are defined in the HTML 3.2 standard:

            black   => 000000,
            silver  => c0c0c0,
            gray    => 808080,
            white   => ffffff,
            maroon  => 800000,
            red     => ff0000,
            purple  => 800080,
            fuchsia => ff00ff,
            green   => 008000,
            lime    => 00ff00,
            olive   => 808000,
            yellow  => ffff00
            navy    => 000080,
            blue    => 0000ff,
            teal    => 008080,
            aqua    => 00ffff,

    Many more names are supported in specific browsers, but it is safest to use the hex codes for other colors. Helpful color tables can be located with an internet search for "HTML color tables".

    Besides color, two other character attributes may be set: bold, and italics. To set a token type to use bold, use the flag --html-bold-xxxxxx or -hbx, where xxxxxx or x are the long or short names from the above table. Conversely, to set a token type to NOT use bold, use --nohtml-bold-xxxxxx or -nhbx.

    Likewise, to set a token type to use an italic font, use the flag --html-italic-xxxxxx or -hix, where again xxxxxx or x are the long or short names from the above table. And to set a token type to NOT use italics, use --nohtml-italic-xxxxxx or -nhix.

    For example, to use bold braces and lime color, non-bold, italics keywords the following command would be used:

            perltidy -html -hbs -hck=00FF00 -nhbk -hik somefile.pl

    The background color can be specified with --html-color-background=n, or -hcbg=n for short, where n is a 6 character hex RGB value. The default color of text is the value given to punctuation, which is black as a default.

    Here are some notes and hints:

    1. If you find a preferred set of these parameters, you may want to create a .perltidyrc file containing them. See the perltidy man page for an explanation.

    2. Rather than specifying values for these parameters, it is probably easier to accept the defaults and then edit a style sheet. The style sheet contains comments which should make this easy.

    3. The syntax-colored html files can be very large, so it may be best to split large files into smaller pieces to improve download times.

SOME COMMON INPUT CONVENTIONS

  Specifying Block Types
Several parameters which refer to code block types may be customized by also specifying an associated list of block types. The type of a block is the name of the keyword which introduces that block, such as if, else, or sub. An exception is a labeled block, which has no keyword, and should be specified with just a colon. To specify all blocks use '*'.

The keyword sub indicates a named sub. For anonymous subs, use the special keyword asub.

For example, the following parameter specifies "sub", labels, "BEGIN", and "END" blocks:

   -cscl="sub : BEGIN END"

(the meaning of the -cscl parameter is described above.) Note that quotes are required around the list of block types because of the spaces. For another example, the following list specifies all block types for vertical tightness:

   -bbvtl='*'

  Specifying Paren Types
Several input parameters accept a single alphanumeric letter to specify the parentheses to which they apply.

The possible letters are 'k', 'K', 'f', 'F', 'w', and 'W', with these meanings for matching whatever precedes an opening paren:

 'k' matches if the previous nonblank token is a perl keyword
     (such as 'my', 'for'),
 'K' matches if 'k' does not: previous token is not a keyword
 'f' matches if previous token is a function or '->' (not a keyword)
 'F' matches if 'f' does not.
 'w' matches if either 'k' or 'f' match.
 'W' matches if 'w' does not.

Most parameters also allow '1' or '*' to select all parens, and '0' to select no parens.

For example, the opening paren in this expression is preceded by the builtin keyword "my" so it matches type 'k' (keyword) but also 'w' (keyword or function) and 'F' (not a function):

    my ( $name, $inx2, $id, $dir, $key);

The opening paren in the following expression is a function call so it matches type 'f' (function) and also 'w' (keyword or function) and 'K' (not a keyword):

    $G->get_attribute( 'capacity', $u, $v );

So both of these expressions match type 'w' (keyword or function). Note that the letter 'w' is suggestive of some kind of word.

  Specifying File Extensions
Several parameters allow default file extensions to be overridden. For example, a backup file extension may be specified with -bext=ext, where ext is some new extension. In order to provides the user some flexibility, the following convention is used in all cases to decide if a leading '.' should be used. If the extension "ext" begins with "A-Z", "a-z", or "0-9", then it will be appended to the filename with an intermediate '.' (or perhaps a '_' on VMS systems). Otherwise, it will be appended directly.

For example, suppose the file is somefile.pl. For "-bext=old", a '.' is added to give somefile.pl.old. For "-bext=.old", no additional '.' is added, so again the backup file is somefile.pl.old. For "-bext=~", then no dot is added, and the backup file will be somefile.pl~ .

SWITCHES WHICH MAY BE NEGATED
The following list shows all short parameter names which allow a prefix 'n' to produce the negated form:

 D      aia    altc   ame    anl    asbl   asc    ast    asu    atc
 atnl   aws    b      baa    baao   bar    bbao   bbb    bbc    bboc
 bbs    bl     bli    blpc   boa    boc    bok    bol    bom    bos
 bot    botc   botl   cblx   ce     conv   cpb    cpbw   cs     csc
 cscb   cscw   csfs   dac    dbc    dbs    dcbl   dcsc   dcsfl  ddf
 dfsfs  dhk    dia    dior   dku    dln    dltc   dlu    dma    dmcp
 dmr    dnl    dnt    dop    dp     dpro   drc    dsc    dsk    dsm
 dsn    dtc    dtco   dtt    duk    duv    dwic   dwls   dwrs   dws
 eos    f      fpva   frm    fs     fso    gcs    hbc    hbcm   hbco
 hbh    hbhh   hbi    hbj    hbk    hbm    hbn    hbp    hbpd   hbpu
 hbq    hbs    hbsc   hbv    hbw    hent   hic    hicm   hico   hih
 hihh   hii    hij    hik    him    hin    hip    hipd   hipu   hiq
 his    hisc   hiu    hiv    hiw    hsc    html   ibc    icb    icp
 ils    iob    ipc    isbc   iscl   kgb    kgbd   kgbi   kis    lal
 log    lop    lp     lsl    mci    mem    nib    ohbr   okw    ola
 olc    oll    olq    opr    opt    osbc   osbr   otr    ple    pod
 pvl    q      qwaf   sac    sbc    sbl    scbb   schb   scp    scsb
 sct    se     sfp    sfs    skp    sob    sobb   sohb   sop    sosb
 sot    ssc    st     sts    t      tac    tbc    toc    tp     tqw
 trp    ts     tsc    tso    vbc    vc     vco    viu    vmll   vsc
 vsn    vwe    w      wcsfl  wfc    wia    wma    wme    wmr    wn
 wnt    wsk    wucc   wuk    x      xbt    xci    xlp    xs

Equivalently, the prefix 'no' or 'no-' on the corresponding long names may be used.

LIMITATIONS

Parsing Limitations
    Perltidy should work properly on most perl scripts. It does a lot of self-checking, but still, it is possible that an error could be introduced and go undetected. Therefore, it is essential to make careful backups and to test reformatted scripts.

    The main limitation is that perltidy does not scan modules included with 'use' statements. This makes it necessary to guess the context of any bare words introduced by such modules. Perltidy has good guessing algorithms, but they are not infallible. When it must guess, it leaves a message in the log file.

    If you encounter a bug, please report it.

What perltidy does not parse and format
    Perltidy indents but does not reformat comments. Perltidy does not modify the contents of here documents or quoted text, even if they contain source code. (You could, however, reformat them separately). Perltidy does not format 'format' sections in any way. And, of course, it does not modify pod documents.

FILES

Temporary files
    Under the -html option with the default --pod2html flag, and if Pod::Html is selected as the pod formatter, a temporary file is required to pass text to and from "Pod::Html". A randomly-named temporary file is created with "File::Temp::tempfile" for this purpose. This file is removed after the data transfer.

    A temporary file is not normally needed for perl versions 5.10 and later unless Pod::Html is specifically requested with the --use-pod-formatter parameter.

Special files when standard input is used
    When standard input is used, the log file, if saved, is perltidy.LOG, and any errors are written to perltidy.ERR unless the -se flag is set. These are saved in the current working directory.

Files overwritten
    The following file extensions are used by perltidy, and files with these extensions may be overwritten or deleted: .ERR, .LOG, .TEE, and/or .tdy, .html, and .bak, depending on the run type and settings.

Files extensions limitations
    Perltidy does not operate on files for which the run could produce a file with a duplicated file extension. These extensions include .LOG, .ERR, .TEE, and perhaps .tdy and .bak, depending on the run type. The purpose of this rule is to prevent generating confusing filenames such as somefile.tdy.tdy.tdy.

ERROR HANDLING
An exit value of 0, 1, or 2 is returned by perltidy to indicate the status of the result.

A exit value of 0 indicates that perltidy ran to completion with no error messages.

A non-zero exit value indicates some kind of problem was detected.

An exit value of 1 indicates that perltidy terminated prematurely, usually due to some kind of errors in the input parameters. This can happen for example if a parameter is misspelled or given an invalid value. Error messages in the standard error output will indicate the cause of any problem. If perltidy terminates prematurely then no output files will be produced.

An exit value of 2 indicates that perltidy was able to run to completion but there are (1) warning messages in the standard error output related to parameter errors or problems and/or (2) warning messages in the perltidy error file(s) relating to possible syntax errors in one or more of the source script(s) being tidied. When multiple files are being processed, an error detected in any single file will produce this type of exit condition.

SEE ALSO
perlstyle(1), Perl::Tidy(3)

INSTALLATION
The perltidy binary uses the Perl::Tidy module and is installed when that module is installed. The module name is case-sensitive. For example, the basic command for installing with cpanm is 'cpanm Perl::Tidy'.

VERSION
This man page documents perltidy version 20260808

BUG REPORTS
The source code repository is at <https://github.com/perltidy/perltidy>.

To report a new bug or problem, use the "issues" link on this page.

COPYRIGHT
Copyright (c) 2000-2026 by Steve Hancock

LICENSE
This package is free software; you can redistribute it and/or modify it under the terms of the "GNU General Public License".

Please refer to the file "COPYING" for details.

DISCLAIMER
This package is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

See the "GNU General Public License" for more details.